Abstract:A dispersion system fluid can convect even if the dispersoid is a solid phase. Therefore, heat exchange performance can be improved while maintaining fluidity using a material with high thermal conductivity as the dispersoid. This study presents the melting performance evaluation results of a latent heat storage material with a carbon nanotube (CNT) dispersion system with high thermal conductivity, which enhances the thermal conductivity of the latent heat storage material and does not limit free convection. Increasing the thermal conductivity and enhancing the melting convection of the heat storage material result in increased latent heat storage speed. In this study, the thermal conductivity of the latent heat storage material was successfully increased by dispersing CNTs in the material. When 0.1% (in mass) of multi-wall CNT (MWCNT) was dispersed in a paraffin-based latent heat storage material, the shear stress increased by 1.5 times at a shear rate of 500 s −1 , while taking into account the potential effects of convective inhibition. Therefore, a latent heat storage experiment was conducted in a rectangular heat storage tank using the CNT dispersion composition ratio as a parameter. A rectangular vessel with a heated vertical surface was used for the latent heat storage experiment. The melting speed was determined by comparing the amount of latent heat stored in a CNT-dispersed latent heat storage material and a single-phase latent heat storage material sample. The experimental results show that the time required for the latent heat storage material to completely melt in the heat storage tank was the shortest for the single-phase latent heat storage material sample. However, the fastest melting progress was observed for the sample with 0.02% (in mass) MWCNT content in the melting rate range of up to approximately 40% in the tank. The results indicate that this phenomenon is caused by the difference in the melting rates in the upper part of the tank. The generated data are useful for determining the shape and heat transfer surface arrangement of the latent heat storage tank.

Natural Convection Melting in a Rectangular Heat Storage Tank of Carbon Nanotube Dispersed Latent Heat Storage Material

Unconstrained Melting Heat Transfer of Nano-Enhanced Phase-Change Materials in a Spherical Capsule for Latent Heat Storage: Effects of the Capsule Size

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Heat Transfer During Constrained Melting Of Graphite-Based Nanofluids In A Spherical Capsule

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Parametric Study on Melting Process of a Shell-and-tube Latent Thermal Energy Storage under Fluctuating Thermal Conditions

Experimental Investigation of Heat Storage and Heat Transfer Rates During Melting of Nano-Enhanced Phase Change Materials (nepcm) in a Differentially-Heated Rectangular Cavity

Solidification Behavior of Hybrid Tio2 Nanofluids Containing Nanotubes and Nanoplatelets for Cold Thermal Energy Storage

Study on melting process of latent heat energy storage system by nano-enhanced phase change material under rotation condition

Performance Enhancement of Latent Thermal Energy System under Alternating Magnetic Field

Pool Boiling Heat Transfer During Quenching in Carbon Nanotube (Cnt)-Based Aqueous Nanofluids: Effects of Length and Diameter of the CNTs

Natural convection in the melting of PCM in a cylindrical thermal energy storage system: effects of flow arrangements of heat transfer fluid and associated thermal boundary conditions

Effect of carbon nanotubes on melting latent heat of paraffin wax: An experimental and simulated research

Synergistic enhancement strategy on the heat charging process of a shell-and-tube thermal storage device based on close-contact melting mechanism and nano-enhanced phase change material

An experimental investigation of melting of nanoparticle-enhanced phase change materials (NePCMs) in a bottom-heated vertical cylindrical cavity

Numerical study on the enhanced solidification process in ice thermal energy storage with magnetic carbon nanotubes

Latent heat thermal energy storage in a shell-tube design: Impact of metal foam inserts in the heat transfer fluid side

Numerical investigation on melting and energy storage density enhancement of phase change material in a horizontal cylindrical container

Simulation on paraffin melting enhancement in shell-tube phase change thermal storage equipment induced by natural convection

Experimental investigation of thermal energy storage in shell-and-multi-tube unit with nano-enhanced phase change material

Performance improvement in a vertical latent thermal energy storage tank with crossing heat transfer tubes