Achromatic Metalens over 60 nm Bandwidth in the Visible and Metalens with Reverse Chromatic Dispersion.

Wei Ting Chen,V. Sanjeev,Zhujun Shi,Aun Zaidi,F. Capasso,M. Khorasaninejad,A. Zhu

DOI: https://doi.org/10.1021/acs.nanolett.6b05137

2017-01-24

Abstract:In this Letter, we experimentally report an achromatic metalens (AML) operating over a continuous bandwidth in the visible. This is accomplished via dispersion engineering of dielectric phase shifters: titanium dioxide nanopillars tiled on a dielectric spacer layer above a metallic mirror. The AML works in reflection mode with a focal length independent of wavelength from λ = 490 to 550 nm. We also design a metalens with reverse chromatic dispersion, where the focal length increases as the wavelength increases, contrary to conventional diffractive lenses. The ability to engineer the chromatic dispersion of metalenses at will enables a wide variety of applications that were not previously possible. In particular, for the AML design, we envision applications such as imaging under LED illumination, fluorescence, and photoluminescence spectroscopy.

Engineering,Medicine,Physics,Materials Science

What problem does this paper attempt to address?

This paper aims to solve the problems of design and implementation of achromatic metalenses in the visible light range. Specifically, the author achieved an Achromatic Metalens (AML) with a focal length that does not change with the wavelength in the wavelength range from 490 nm to 550 nm by designing a titanate nanopillar array with a specific phase profile. In addition, the author also designed a metalens with anomalous dispersion characteristics, that is, the focal length increases as the wavelength increases, which is opposite to the behavior of traditional diffraction lenses.

### Problems Solved in the Paper

1. **Design of Achromatic Metalenses**:
- Due to the dispersion characteristics of materials, traditional lenses will have different focal lengths for light of different wavelengths passing through them, resulting in blurred imaging. In this paper, by precisely controlling the geometric parameters (such as diameter, height, and center - to - center spacing) of titanate nanopillars, an achromatic metalens with a constant focal length in a wide band (from 490 nm to 550 nm) was achieved.
- The specific phase profile formula is:
\[
\varphi(x, y, \lambda) = C(\lambda)-\frac{2\pi}{\lambda}(\sqrt{x^{2}+y^{2}+f^{2}} - f)
\]
where \(\lambda\) is the wavelength, \(f\) is the focal length, and \(C\) is the reference phase, which is chosen to be wavelength - dependent.

2. **Design of Anomalous Dispersion Metalenses**:
- In addition to the achromatic metalens, the author also designed a metalens with anomalous dispersion characteristics, that is, the focal length increases as the wavelength increases. This design further proves that planar lenses with specific dispersion characteristics can be achieved through dispersion engineering.

### Application Prospects

- **Imaging Applications**: It is suitable for imaging under LED lighting, applications requiring broadband light sources such as fluorescence and photoluminescence spectroscopy.
- **Optical Systems**: By cascading metalenses with opposite dispersion characteristics, a wider - band achromatic lens can be achieved, thereby expanding the application range of optical systems.
- **New Optical Elements**: Using high - refractive - index materials (such as gallium arsenide) can further increase the phase coverage range and design a higher - performance transmissive achromatic metalens.

In conclusion, through an innovative dispersion engineering method, this paper successfully solves the problems of design and implementation of achromatic metalenses in the visible light range, providing new possibilities for multiple applications in the field of optics.