Abstract:Abstract Exploration wells in India are being drilled to target tight sandstone reservoirs of Mesozoic age with potential hydrocarbon accumulation in the Gulf of Kutch (GK) & Gulf of Saurashtra (GS). Typical permeability ranges from 0.1 md to 2.5 md with effective porosity in range of 8% to 13% in good sandstone layers. These boreholes are seen to have substantial risks in drilling and completion, as evident by the severe wellbore instability events in the offset wells. Presence of wide breakouts and stress rotations along the wellbore axis with variation in dips along fractures are often observed, indicating complicated wellbore failure modes. Considering the increasing exploration activity and field development plans for these basins located in western offshore India, maintenance of hole integrity till open hole logging and optimizing perforation depths for hydro-fracturing jobs are the main challenge in upcoming wells. An advanced acoustic geomechanics workflow for the estimation of formation horizontal stresses from the inversion of four velocity radial profiles was implemented in shallower formations of offset wells with the help of advanced borehole 3D acoustic profiling measurements. Based on the estimation of stress parameters, stable mud weight windows and rock mechanical properties were estimated for a planned well. Reported over-gauged hole condition, caving, and stuck tool incidents are found at the depth intervals where the estimated breakout mud limit exceeds the mud weight used during drilling of offset wells. Pore pressure value is in range of 13.7 ppg to 14.1 ppg EMW with sudden change in regime during transition from Trap formation to Mesozoic formation. Stable mud weights to avoid breakouts are in range of 14.2 ppg to 14.7 ppg EMW for vertical well. The local normal fault regime is identified with few interbedded stress barriers. Simulated ECD value ranges 15.6 ppg to 16.1 ppg for an 8.5-in section with 600 gpm. The rock mechanical properties constrained by inverted stresses and wellbore failure were used to optimize bit and BHA design in the planned well. Real-time monitoring has been performed in the planned well using logging while drilling data, borehole images, and cutting analysis. Intermediate advanced acoustic profiling logs and drilling parameters were used in the planned well to directly estimate stress gradients and proactively keep mud weight within the stable mud weight window. By monitoring magnitude of breakouts present in LWD images and caving type, further remedial actions were taken. Few high angle features with gas peaks were encountered as seen in offset wells. Hole cleaning was performed regularly through pumping high viscous pills and cutting load was monitored at each connection through ECD and ESD variations. Near balance equilibrium was maintained to minimize hoop stress related skin around the sandstone layers. The modifications resulted in significant reduction of nonproductive time in the planned well as compared to the offset wells by 40%. Successful casing and cementing of 7-in liner to planned depth with good cement bond was also achieved, unlike offset wells where wellbore instabilities were severe. Upon designing an appropriate stimulation strategy in a HPHT and high-stress environment, closure pressure and breakdown pressure ranges were 12,300 psi to 13,500 psi and 13,000 psi to 14,800 psi, respectively, in sandstone with 8% to 13% effective porosity. To optimize expensive hydraulic fracturing stimulation treatments, the open hole advanced 3D acoustic logs were analyzed to identify and test gas bearing intervals. Intervals with suspected critically stressed natural fractures as indicated by 3D shear moduli changes were identified. The optimized intervals flowed gas to surface at good rates with minimal stimulation, proving commercial viability of the field.

Decoding Subsurface Secondary Mineralisation and its Impact on Cohesive Strength: An Outcome of the Deep Scientific Drilling Program in the Koyna–Warna Seismogenic Region, Western India

Heat flow and thermal structure in the Koyna seismic zone, western India: Implications for recurrent reservoir triggered seismicity

Detachment-controlled Subsidence Pattern at Hyper-extended Passive Margin: Insights from Backstripping Modelling of the Baiyun Rift, Northern South China Sea

Evidence of water percolation in granitoid basement in Koyna seismogenic zone: Implications for reservoir triggered seismicity

Identification of New Base Metal Mineralization in Kumaon Himalaya, India, Using Hyperspectral Remote Sensing and Hydrothermal Alteration

Tectonic development in Singhbhum Craton, NE India decrypted from dyke swarms: A window to understand magma dynamics in Archean-Proterozoic supercontinents

Seismic Driven Geomechanical Modeling of Uplifted and Subsided Wells in Mumbai Offshore and Its Engineering Implications

Successful Drilling of Deep Wells Aided by Geomechanical Analysis and Real-Time Decision Making in Complex Geological Setting in the North-Eastern Part of the India

Petrographic and geochemical characteristics of the granitic basement rocks below Deccan Traps obtained from scientific drilling to 3014 m depth in the Koyna region, western India

Improving the capability of integrated DInSAR and PSI approach for better detection, monitoring, and analysis of land surface deformation in underground mining environment

Geophysical exploration of tectonic signatures in proterozoic quartzite of the Kovilpatti region, Southern India: a study in the Kurumalai and Oodumalai hills

Structural controls on bedrock weathering in crystalline basement terranes and its implications on groundwater resources

Optimization of Survey Area for Auriferous-Sulphide Mineralization Using Integrated Geophysical Study: A Case Study from Gani-Kalva Fault Zone, Cuddapah Basin, India

Advancing Subsurface Analysis: Integrating Computer Vision and Deep Learning for Near Real-Time Interpretation of Borehole Image Logs in the Illinois Basin Decatur Project

Three-Dimensional Coupled Temporal Geomechanical Model for Fault-Reactivation and Surface-Deformation Evaluation during Reservoir Depletion and CO2 Sequestration, Securing Long-Term Reservoir Sustainability

Flexural subsidence analysis of the Laxmi Basin, Arabian Sea and its tectonic implications

Shallow crustal imaging beneath NW Indian terrane from teleseismic P-wave coda using a Bayesian approach

Subsurface structural trends in Central-Western India: Inferences from magnetotelluric data using the complex MT apparent resistivity tensor

Imaging of Different Crustal and Mantle Discontinuities Below the Hyderabad Region on the Eastern Dharwar Craton

Geomechanical Aspect of Successful Deep Tight Gas Sandstone Exploration Involving Drilling to Completion

Upper mantle deformation beneath the northeastern part of Indian plate from shear-wave splitting analysis