Abstract:Distilled water pool boiling experiments are conducted to investigate the effect of deposing silver nanoparticles via boiling-induced deposition method on porous foam covers on pool boiling performance and bubbles dynamic behavior. Two copper foams, named foam No. 1 (with 85% porosity and pore density of 30 PPI) and No. 2 (with 90% porosity and pore density of 40 PPI), are welded on copper specimens (Conical frustum) and then coated by silver nanoparticles using DZ nano-coolant nanofluid with a concentration of 25 mg/L. All the experiments are carried out at atmospheric pressure on both uncoated and nano-coated foams. The findings reveal that compared to a polished plain copper surface, uncoated foams No. 1 and No. 2 improve average boiling heat transfer coefficient by 58% and 86% and reduce wall superheat at ONB by 4.7 °C and 5.3 °C, respectively. However, due to the generation of more bubbles with smaller sizes and lower release periods on coated foams compared to uncoated ones, deposing nanoparticles on foam No. 1 and No. 2 contributes to further enhancements in heat transfer coefficients by 18% and 9% (at the best performance), respectively, and 0.3 °C further reduction in wall superheat at ONB. To evaluate the effectiveness of nanoparticle deposition on foam covers as a hybrid enhancement technique, the experimental results are compared with the results attained for nano-coated polished copper surface and also copper foam covers enhanced further by manipulating their wettability and macro-scale structure. The comparison results indicate that the coated foams perform better than the coated polished plain surfaces, notably at low heat fluxes. Also, the nanoparticle deposition on foam covers is seen to be of superior performance compared to the aforementioned hybrid enhancement techniques.

Enhancing Wicking Microflows in Metallic Foams

Experimental Study on Capillary Microflows in High Porosity Open-Cell Metal Foams

Capillary Microflows in Porous Metals

Capillary-driven evaporation of superhydrophilic copper foams with ultra-high porosity

The Roughness Effect on the Preparation of Durable Superhydrophobic Silver-Coated Copper Foam for Efficient Oil/Water Separation

On the effect of silver nanoparticles deposition on porous copper foams on pool boiling heat transfer enhancement: an experimental visualization

Experimental investigation of permeability and Darcy-Forchheimer flow transition in metal foam with high pore density

Enhanced Convective Heat Transfer In High Porosity Metal Foams

Enabling Superhydrophobicity-Guided Superwicking in Metal Alloys via a Nanosecond Laser-Based Surface Treatment Method

Hierarchically Porous Micro/nanostructured Copper Surfaces with Enhanced Antireflection and Hydrophobicity

ICOPE-15-C130 Investigation on Pool Boiling Heat Transfer of Metal Foams with Gradient Pore Densities

Modification and Pool Boiling Performance Elevation of Copper Foam Wicks for High Power Applications

Water-Etched Porous Ti: Surface Manipulation of Ti Foam Fabricated by Liquid Metal Dealloying Technique

Preparation of high porosity copper foam by polyurethane sponge impregnation method

Preparation of Superhydrophobic Surfaces Based on Copper Mesh Substrates and Its Application Performance

Supramolecular metallic foams with ultrahigh specific strength and sustainable recyclability

One-Step Preparation of Robust Superhydrophobic Foam for Oil/Water Separation by Pulse Electrodeposition

Design and preparation of efficient, stable and superhydrophobic copper foam membrane for selective oil absorption and consecutive oil–water separation

Experimental investigation on the influence of copper foam characteristics on pool boiling heat transfer

High‐Flux Steady‐State Demulsification of Oil‐In‐Water Emulsions by Superhydrophilic‐Oleophobic Copper Foams with Ultra‐Small Pores Under Pressure

Development of New Foaming Agent for Metal Foam