Abstract:The current research of the global chassis control problem for the full drive-by-wire vehicle focuses on the control allocation (CA) of the four-wheel-distributed traction/braking/steering systems. However, the path following performance and the handling stability of the vehicle can be enhanced a step further by automatically adjusting the vehicle speed to the optimal value. The optimal solution for the combined longitudinal and lateral motion control (MC) problem is given. First, a new variable step-size spatial transformation method is proposed and utilized in the prediction model to derive the dynamics of the vehicle with respect to the road, such that the tracking errors can be explicitly obtained over the prediction horizon at varying speeds. Second, a nonlinear model predictive control (NMPC) algorithm is introduced to handle the nonlinear coupling between any two directions of the vehicular planar motion and computes the sequence of the optimal motion states for following the desired path. Third, a hierarchical control structure is proposed to separate the motion controller into a NMPC based path planner and a terminal sliding mode control (TSMC) based path follower. As revealed through off-line simulations, the hierarchical methodology brings nearly 1700% improvement in computational efficiency without loss of control performance. Finally, the control algorithm is verified through a hardware in-the-loop simulation system. Double-lane-change (DLC) test results show that by using the optimal predictive controller, the root-mean-square (RMS) values of the lateral deviations and the orientation errors can be reduced by 41% and 30%, respectively, comparing to those by the optimal preview acceleration (OPA) driver model with the non-preview speed-tracking method. Additionally, the average vehicle speed is increased by 0.26 km/h with the peak sideslip angle suppressed to 1.9°. This research proposes a novel motion controller, which provides the full drive-by-wire vehicle with better lane-keeping and collision-avoidance capabilities during autonomous driving.

Automatic Driving Control Method Based on Time Delay Dynamic Prediction.

Automatic Driving Control Based on Time Delay Dynamic Predictions

Trajectory Tracking Control for Autonomous Parking Based on Adaptive Reduced-horizon Model Predictive Control

Predictive Control Method of Autonomous Vehicle Based on Tracking-error Model

A Fast Cornering Method Based on Model Predictive Control

Trajectory Tracking Control for Autonomous Parking Using Reduced-Horizon Model Predictive Control

A Moving Object Detection and Predictive Control Algorithm Based on Deep Learning

Preview Path Tracking Control with Delay Compensation for Autonomous Vehicles

Discrete-time Finite Horizon Adaptive Dynamic Programming for Autonomous Vehicle Control

Comprehensive Predictive Control Method for Automated Vehicles in Dynamic Traffic Circumstances

Longitudinal Predictive Control for Vehicle-Following Collision Avoidance in Autonomous Driving Considering Distance and Acceleration Compensation

An Adaptive-PID Path Tracking Algorithm Based on High Accuracy Driving Map for an Autonomous Vehicle

Comprehensive Predictive Control Method for Automated Vehicles With Delays.

Trajectory-guided Control Prediction for End-to-end Autonomous Driving: A Simple yet Strong Baseline

An Adaptive Horizon Predictive Control Method for Autonomous Vehicles

Optimal Predictive Control for Path Following of a Full Drive-by-Wire Vehicle at Varying Speeds

Path tracking control based on tube MPC and time delay motion prediction

Event-triggered model predictive-preview control strategy for trajectory tracking of autonomous vehicle

Research on dynamic constraint mechanism and motion control of intelligent vehicles based on preview distance optimization under complex road conditions

Online Active Set-Based Longitudinal and Lateral Model Predictive Tracking Control of Electric Autonomous Driving