Abstract:This paper investigates the concept of pre-combustion carbon capture (Pre-CCS) with a combined cycle gas turbine (CCGT) propulsion system to achieve energy efficient carbon capture onboard a Liquid Natural Gas fuelled vessel. A basic CCGT model with energy efficiency of 51.6 % when using LNG as fuel was integrated with a Pre-CCS system composed of a steam methane reformer, water–gas shift reactors, pressure swing adsorption (SMR-PSA), and liquid CO 2 storage. Various waste heat utilisation schemes integrated with the CCGT-reformer were modelled in Aspen HYSYS. The modelling of the waste heat recovery networks as energy streams integrating between various processes and unit of operations has facilitated a closed-loop simulation of various systems. It was concluded that a proper utilisation of the high-grade heat from the gas turbine (GT) exhaust and from the reformer is crucial to improve the overall energy efficiency and carbon capture rate, exemplified by a scheme where the heating needs for the SMR and the cooling needs from the water–gas-shift reactors are fully integrated. When optimised, the integrated system had an overall energy efficiency of 41.5 % and 43.2 % (i.e. an efficiency loss of 10.2–10.5 percentage points from the base CCGT system) accompanied with specific GHG emission reduction of 51.2 % and 52.3 % for operation of the GT at a turbine entry temperature of 1700 K and 1850 K, respectively. Intermediate levels of reforming, where the GT uses a mix of LNG and reformate gases, were also simulated, showing an almost linear evolution from the 100 % LNG feed to the GT to the 100 % reformate case. Such a strategy could be used for gradual evolution to meet the required CO 2 reduction timeline. It was determined that the 100 % reformate case provides the highest CO 2 capture rate. Estimates of other emissions from the GT assuming typical combustor residence times for the whole range of fuel blends were also carried out, showing that the overall greenhouse gas emission is dominated by CO 2 , given that the GT emits negligible N 2 O and unburnt methane. Some capital cost estimates were also made to determine the unit price of hydrogen fuel produced onboard, suggesting that the CAPEX was not prohibitive. These findings support the pre-combustion CCS − CCGT integrated system as a promising long-term decarbonisation and propulsion strategy to comply with emissions regulations, displaying good performance in terms of cost, energy consumption, and CO 2 reduction. The scalability and adaptability of the proposed system for existing and new-built ships across the decarbonisation timeline is also discussed.

Environmental impact investigation of combined CCS and SCR on a ship by a case study

How Can Shipowners Comply with the 2020 Global Sulphur Limit Economically?

Impact of Maritime Emissions Trading System on Fleet Deployment and Mitigation of CO2 Emission

Incentive Policy for Reduction of Emission from Ships: A Case Study of China

Cost-benefit analysis of emission reduction techniques: a case for container vessel

Techno-economic analysis of onboard CO 2 capture for ultra-large container ships

Utilizing waste heat from natural gas engine and LNG cold energy to meet heat-electric-cold demands of carbon capture and storage for ship decarbonization: Design, optimization and 4E analysis

Study on Shipboard Carbon Capture Technology with the MEA-AMP-Mixed Absorbent Based on Ship Applicability Perspective

Navigating Towards a Zero-Carbon World: Research Progress of Chemical Solvent-Based Shipboard Carbon Capture System Integration and Renewable Energy Coupling

Exploring the technical feasibility of carbon capture onboard ships

A Case Study for a General Cargo Ship

Reduction of the harmful NOx pollutants emitted from the ship engines using high-pressure selective catalytic reduction system

Onboard test-based exhaust emission factors for marine diesel engines on anchor handling tug supply vessels

Onboard pre-combustion carbon capture with combined-cycle gas turbine power plant architectures for LNG-fuelled ship propulsion

Marine Exhaust Gas Treatment Systems for Compliance with the IMO 2020 Global Sulfur Cap and Tier III NOx Limits: A Review

A Thermodynamics Model for the Assessment and Optimisation of Onboard Natural Gas Reforming and Carbon Capture

A Preliminary Study on an Alternative Ship Propulsion System Fueled by Ammonia: Environmental and Economic Assessments

Environmental and Economic Evaluation of Dual-Fuel Engine Investment of a Container Ship

Effect of Electric Vehicle Transportation and Carbon Capture System on Concept Ro-Ro ship Stability and EEDI

Decarbonising inland ship power system: Alternative solution and assessment method

Utilizing the Thermal Energy from Natural Gas Engines and the Cold Energy of Liquid Natural Gas to Satisfy the Heat, Power, and Cooling Demands of Carbon Capture and Storage in Maritime Decarbonization: Engineering, Enhancement, and 4E Analysis