Abstract:For autonomous crane lifting, optimal trajectories of the crane are required as reference inputs to the crane controller to facilitate feedforward control. Reducing the unactuated payload motion is a crucial issue for under-actuated tower cranes with spherical pendulum dynamics. The planned trajectory should be optimal in terms of both operating time and energy consumption, to facilitate optimum output spending optimum effort. This article proposes an anti-swing tower crane trajectory planner that can provide time-energy optimal solutions for the Computer-Aided Lift Planning (CALP) system developed at Nanyang Technological University, which facilitates collision-free lifting path planning of robotized tower cranes in autonomous construction sites. The current work introduces a trajectory planning module to the system that utilizes the geometric outputs from the path planning module and optimally scales them with time information. Firstly, analyzing the non-linear dynamics of the crane operations, the tower crane is established as differentially flat. Subsequently, the multi-objective trajectory optimization problems for all the crane operations are formulated in the flat output space through consideration of the mechanical and safety constraints. Two multi-objective evolutionary algorithms, namely Non-dominated Sorting Genetic Algorithm (NSGA-II) and Generalized Differential Evolution 3 (GDE3), are extensively compared via statistical measures based on the closeness of solutions to the Pareto front, distribution of solutions in the solution space and the runtime, to select the optimization engine of the planner. Finally, the crane operation trajectories are obtained via the corresponding planned flat output trajectories. Studies simulating real-world lifting scenarios are conducted to verify the effectiveness and reliability of the proposed module of the lift planning system.

Point Cloud Based Path Planning for Tower Crane Lifting

Lift Path Planning for Tower Cranes Based on Environmental Point Clouds

Collision-free Trajectory Planning for Robotic Assembly of Lightweight Structures

Hierarchical Path Planning for Autonomous Forklifts in Complex Industrial Environments

Generating Large Convex Polytopes Directly on Point Clouds

Scenario modeling and operation path planning of autonomous driving tower cranes

Robotic Trajectory Planning for Non-Destructive Testing Based on Surface 3D Point Cloud Data

A Practicality and Safety-Oriented Approach for Path Planning in Crane Lifts

A Bim-Based Approach for Automated Tower Crane Layout Planning

Lifting path planning of mobile cranes based on an improved RRT algorithm

Multi-robot Path Planning Algorithm in Dense Environments Using Particular Collision-free Traffic Rules

A Multi-Layered Path Planning Algorithm for Truss Climbing with a Biped Robot.

Dynamic 3D Point-Cloud-Driven Autonomous Hierarchical Path Planning for Quadruped Robots

Automated Method for Optimizing Feasible Locations of Mobile Cranes Based on 3D Visualization

Automated Selection and Localization of Mobile Cranes in Construction Planning

Application of Robotic Obstacle Avoidance in Crane Lift Path Planning

Improving lifting motion planning and re-planning of cranes with consideration for safety and efficiency

Developing a fast and accurate collision detection strategy for crane-lift path planning in high-rise modular integrated construction

Limited environmental information path planning based on 3D point cloud reconstruction

Design and Simulation of Time-energy Optimal Anti-swing Trajectory Planner for Autonomous Tower Cranes

3D Visualization-Based Motion Planning of Mobile Crane Operations in Heavy Industrial Projects