Abstract:The hydraulic conductivity (water permeability) is one of the most significant transport properties of concrete and measuring it is a key step in predicting the performance of concrete as a barrier to the movement of fluids and ions. The transport properties are critical for the performance of the cover layer in protecting embedded reinforcement as waste containments barriers (which are considered in this paper) and other applications such as dams. The measurements are difficult to interpret due to experimental effects of sample size and changes of flow with time and the chemistry of the fluid used.The intrinsic permeability to water and synthetic leachate was determined and the relationship between the eluted volume passing and permeability was established for mortar mixtures having compressive strengths ranging from 5 to 20 MPa. Two mortar mixtures containing portland cement and one without portland cement and incorporating cement kiln dust, lagoon ash, and Ferrosilicate slag were tested. The effects of the sample size were also investigated.The results indicate a decrease in hydraulic conductivity for lower strength mixtures and a slight increase in permeability coefficient for the higher strength mixtures with increasing permeating volumes. Increasing the testing specimen size also slightly increased the coefficient of permeability in lower strength mixtures and decreased the coefficient in higher strength mixtures. The permeability coefficient did not change significantly with pore solution pressure.

Why permeability to water is anomalously lower than that to many other fluids for cement-based material?

The Dependence of Capillary Sorptivity and Gas Permeability on Initial Water Content for Unsaturated Cement Mortars

Characterizing Connectivity and Tortuosity of Pore Network Based on LF-NMR Method to Assess the Water Permeability of White Cement Mortar

Quantifying the Anomalous Water Absorption Behavior of Cement Mortar in View of Its Physical Sensitivity to Water

Determination of water permeability for cementitious materials with minimized batch effect

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

Unified Determination of Relative Molecular Diffusivity and Fluid Permeability for Partially Saturated Cement-Based Materials

Pore-size Resolved Water Vapor Adsorption Kinetics of White Cement Mortars As Viewed from Proton NMR Relaxation

Water Sensitivity of Cement‐based Materials

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

Indirect Assessment of Hydraulic Diffusivity and Permeability for Unsaturated Cement-Based Material from Sorptivity

The Effect of Chemical Aging on Water Permeability of White Cement Mortars in the Context of Sol–gel Science

A New Analytical Method to Predict Permeability Properties of Cementitious Mortars: the Impacts of Pore Structure Evolutions and Relative Humidity Variations

The driving force of water absorption in cementitious materials: An analysis of surface-free energies and pore structure

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Factors Influencing the Capillary Water Absorption Characteristics of Concrete and Their Relationship to Pore Structure

A Numerical Model for Permeability of Cement Mortar Considering the Interfacial Transition Zone

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Factors affecting measurement of hydraulic conductivity in low-strength cementitious materials

Predicting water permeability and relative gas permeability of unsaturated cement-based material from hydraulic diffusivity

Experimental analysis on the relationship between pore structure and capillary water absorption characteristics of cement‐based materials