Abstract:Conductive hydrogels have attracted intensive attention in the field of flexible electronics due to their excellent biocompatibility, suitable Young's modulus, and outstanding electrical conductivity. However, the inherent water-rich feature and insufficient interfacial adhesion of hydrogels hinder the stability and reliability of hydrogel-based devices for applications in complex environments. Herein, we design a novel polyacrylamide/polydopamine hydrogel using deep eutectic solvent (DES) and alkaline solution as the polymerization medium, and the as-obtained hydrogel is both self-adhesive (20.20 kPa for tissue) and anti-freezing properties (-20 °C). The combination of DES and alkaline solution replaces pure DES, which endows the conditions for oxidative polymerization of dopamine to ensure the adhesion performance of the hydrogel, and also makes the hydrogel retain the conductivity and low melting point characteristics of DES. Furthermore, biocompatible carboxylated cellulose nanofibers (CCNFs) are embedded into the hydrogel to further enhance the mechanical properties by about 3 times through the nano-reinforcement effect. Remarkably, the hydrogel can be adhered to the skin as a bioelectrode for electrocardiograph, and can be used as strain sensors to monitor human movements even after storing for 15 days at -20 °C. Meanwhile, the electrochemical characterization of supercapacitors using this hydrogel as an electrolyte shows great application potential.

What problem does this paper attempt to address?

The problem this paper attempts to address is the development of a conductive hydrogel with self-adhesive, antifreeze, and moisturizing properties to improve its stability and reliability in complex environments. Specifically, the authors designed a polyacrylamide/polydopamine (PAM/PDA) hydrogel based on deep eutectic solvents (DES) and alkaline solutions, and embedded carboxylated cellulose nanofibers (CCNFs) to enhance its mechanical properties. This novel hydrogel not only maintains performance at low temperatures but also has good conductivity and self-adhesiveness, making it suitable for flexible electronic devices such as wearable sensors and supercapacitors. ### Main Issues: 1. **Stability and Reliability**: Traditional hydrogels, due to their high water content and insufficient interfacial adhesion, easily lose performance in complex environments, affecting their stability and reliability. 2. **Antifreeze and Moisturizing Properties**: Hydrogels tend to freeze at low temperatures and lose water and harden in dry environments, limiting their application range. 3. **Mechanical Properties**: The mechanical properties of hydrogels are limited, making it difficult to resist external deformation, especially in applications requiring high stretchability and strength. 4. **Self-Adhesiveness**: Most hydrogels require additional fixing devices to be applied to the skin or other surfaces, increasing the complexity and discomfort of use. ### Solutions: 1. **Using Deep Eutectic Solvents (DES) and Alkaline Solutions**: By mixing DES and alkaline solutions as the polymerization medium, the low melting point and low vapor pressure characteristics of DES are retained, while providing the reaction environment required for dopamine oxidative polymerization, ensuring the self-adhesiveness and conductivity of the hydrogel. 2. **Embedding Carboxylated Cellulose Nanofibers (CCNFs)**: Through non-covalent interactions, physical entanglement, and friction, CCNFs significantly improve the mechanical properties of the hydrogel, increasing its tensile strength and toughness by approximately 3 times. 3. **Multifunctional Applications**: The prepared hydrogel can be used as a bioelectrode for electrocardiogram recording, as a strain sensor to monitor human motion, and can even maintain performance after being stored at -20°C for 15 days. Additionally, this hydrogel can be used as a solid-state electrolyte for supercapacitors, showing great application potential. ### Summary: This paper successfully addresses the issues of poor stability, insufficient antifreeze and moisturizing properties, and limited mechanical performance of traditional hydrogels in complex environments by designing a conductive hydrogel based on deep eutectic solvents and alkaline solutions and embedding carboxylated cellulose nanofibers. This provides a new material choice for the development of flexible electronic devices.

Multifunctional conductive hydrogel for wearable sensor and supercapacitor

Stretchable, self-healing, adhesive and anti-freezing ionic conductive cellulose-based hydrogels for flexible supercapacitors and sensors

Flexible high electrochemical active hydrogel for wearable sensors and supercapacitor electrolytes

Multistimuli-Responsive PNIPAM-Based Double Cross-Linked Conductive Hydrogel with Self-Recovery Ability for Ionic Skin and Smart Sensor.

Ultra-stretchable, adhesive, fatigue resistance, and anti-freezing conductive hydrogel based on gelatin/guar gum and liquid metal for dual-sensory flexible sensor and all-in-one supercapacitors

Stretchable, self-adhesion and durable polyacrylamide/polyvinylalcohol dual-network hydrogel for flexible supercapacitor and wearable sensor

Tough and self-healable double-network hydrogel for environmentally resistant all-in-one supercapacitors and strain sensors

Mechanical, adhesive and self-healing ionic liquid hydrogels for electrolytes and flexible strain sensors

Highly Stretchable, Self-Healing, and Low Temperature Resistant Double Network Hydrogel Ionic Conductor as Flexible Sensor and Quasi-Solid Electrolyte

Trehalose-enhanced ionic conductive hydrogels with extreme stretchability, self-adhesive and anti-freezing abilities for both flexible strain sensor and all-solid-state supercapacitor

Self-adhesive, conductive, and multifunctional hybrid hydrogel for flexible/wearable electronics based on triboelectric and piezoresistive sensor

Preparation of Tough and Adhesive PVA/P(AM-AMPS)/Glycerol/Laponite/Na2SO4 Organohydrogels for All-Solid-State Supercapacitors and Self-Powered Wearable Strain Sensors

Stretchable and environment-resistant doubly crosslinked hydrogel for all-in-one supercapacitor and strain sensors

High Electrical Conductivity and Low Temperature Resistant Double Network Hydrogel Ionic Conductor as a Flexible Sensor and Quasi‐Solid Electrolyte

High stretchable and self-adhesive multifunctional hydrogel for wearable and flexible sensors

Molecularly Engineered Chitosan-Derived Poly(Aprotic/Protic Ionic Liquids) Double-Network Hydrogel Electrolytes for Flexible Supercapacitors and Wearable Strain Sensors

Acrylate Copolymer-Reinforced Hydrogel Electrolyte for Strain Sensors and Flexible Supercapacitors

Stretchable, freezing-tolerant conductive hydrogel for wearable electronics reinforced by cellulose nanocrystals toward multiple hydrogen bonding

A transparent, anti-fatigue, flexible multifunctional hydrogel with self-adhesion and conductivity for biosensors

Polydopamine-Based Multifunctional Hydrogel for Flexible Supercapacitor and Pressure Sensor Applications

Mussel-Inspired Conductive Hydrogel with Self-Healing, Adhesive, and Antibacterial Properties for Wearable Monitoring