Abstract:Frequency combs with mode spacing in the range of 10 to 20 gigahertz (GHz) are critical for increasingly important applications such as astronomical spectrograph calibration, high-speed dual-comb spectroscopy, and low-noise microwave generation. While electro-optic modulators and microresonators can provide narrowband comb sources at this repetition rate, a significant remaining challenge is a means to produce pulses with sufficient peak power to initiate nonlinear supercontinuum generation spanning hundreds of terahertz (THz) as required for self-referencing in these applications. Here, we provide a simple, robust, and universal solution to this problem using off-the-shelf polarization-maintaining (PM) amplification and nonlinear fiber components. This fiber-integrated approach for nonlinear temporal compression and supercontinuum generation is demonstrated with a resonant electro-optic frequency comb at 1550 nm. We show how to readily achieve pulses shorter than 60 fs at a repetition rate of 20 GHz and with peak powers in excess of 2 kW. The same technique can be applied to picosecond pulses at 10 GHz to demonstrate temporal compression by a factor of 9x yielding 50 fs pulses with peak power of 5.5 kW. These compressed pulses enable flat supercontinuum generation spanning more than 600 nm after propagation through multi-segment dispersion-tailored anomalous-dispersion highly nonlinear fiber (HNLF) or tantala waveguides. The same 10 GHz source can readily achieve an octave-spanning spectrum for self-referencing in dispersion-engineered silicon nitride waveguides. This simple all-fiber approach to nonlinear spectral broadening fills a critical gap for transforming any narrowband 10 to 20 GHz frequency comb into a broadband spectrum for a wide range of applications that benefit from the high pulse rate and require access to the individual comb modes.

High-power frequency comb at 2 μm wavelength emitted by a Tm-doped fiber laser system.

High-power, hybrid Er:fiber/Tm:fiber frequency comb source in the 2 μm wavelength region

An ultra-stable high-power optical frequency comb

High-power two-color plasma-based THz generation driven by a Tm-doped fiber laser

Generation of a 650 nm - 2000 nm Laser Frequency Comb based on an Erbium-Doped Fiber Laser

Phase-stabilized, 1.5-W frequency comb at 2.8 to 4.8 micron

A six-octave optical frequency comb from a scalable few-cycle erbium fiber laser

All-fiber GHz few-cycle pulse generation at 2 µm

High peak-power 2.1-μm femtosecond Holmium amplifier at 100 kHz

Fully phase-stabilized 1 GHz turnkey frequency comb at 1.56 $μ$m

20 GHz fiber-integrated femtosecond pulse and supercontinuum generation with a resonant electro-optic frequency comb

950 Nm Femtosecond Laser by Directly Frequency-Doubling of a Thulium-Doped Fiber Laser

Spectrally resolved optical frequency comb from a self-referenced 5 GHz femtosecond laser

Tunable, stable source of femtosecond pulses near 2 μm via supercontinuum of an Erbium mode-locked laser

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

A six-octave optical frequency comb from a scalable few-cycle erbium fibre laser

Diversified pulse generation from frequency shifted feedback Tm-doped fibre lasers

50-W 2-μm Nanosecond All-Fiber-Based Thulium-Doped Fiber Amplifier

High-power narrow-bandwidth thulium fiber laser with an all-fiber cavity.

Tunable optical frequency comb from a compact and robust Er:fiber laser

Power-scalable sub-100-fs Tm laser at 2.08 μm