Multiobjective Optimization Design for Electrically Large Coverage: Fragment-Type Near-Field\/Far-Field UHF RFID Reader Antenna Design

Dawei Ding,Jing Xia,Lixia Yang,Xiaodong Ding

DOI: https://doi.org/10.1109/map.2017.2774140

IF: 3.179

2018-01-01

IEEE Antennas and Propagation Magazine

Abstract:The design of an ultrahigh-frequency (UHF) radio-frequency identification (RFID) reader antenna covering an electrically large near-field area is challenging for near-field UHF RFID applications. In such a design, magnetic field distribution on a large coverage area is required to be as uniform as possible. For some specific UHF near-field RFID applications, given radiation pattern characteristics are expected. A fragment-type wire structure is quite suitable for these demands because uniform magnetic field distribution and given patterns could be generated through optimizing the fragmented wires in a designated electrically large area to obtain corresponding current distribution. In this article, the concept of a fragment-type structure as well as some design guidelines are reviewed and summarized. Then, two omnidirectional fragment-type wire antennas with different cell size and two directional fragment-type wire antennas are designed. Both simulation and experiment results show that there is no reading null within an electrically large near-field zone having a perimeter of four operating wavelengths at 915 MHz (i.e., 320 mm x 320 mm). The omnidirectional designs are promising in the applications of UHF near-field RFID tag detection in self-confined volumes, and the directional designs are potential in the systems of UHF near-field/far-field RFID.