Abstract:Aluminum (Al) is usually added to solid propellants to improve the combustion performance, however the condensed combustion products (CCPs) especially the large agglomerates generated from aluminum combustion can reduce the specific impulse of the engine, and result in two-phase loss, residue accumulation and throat liner ablation. Al and ammonium perchlorate (AP), as important components of NEPE propellants, can affect the formation process of the CCPs of aluminized NEPE propellants. To clarify the effect of Al and AP particle sizes on the properties of the CCPs of aluminized NEPE propellants, a constant-pressure quench vessel was adopted to collect the combustion products of four different formulations of NEPE propellants. It was found that the condensed combustion products are mainly divided into aluminum agglomerates and oxide particles, the diameter of the aluminum agglomerates of these four different formulations of NEPE propellants at 7 MPa was smaller than that in 3 MPa, and the shells of the aluminum agglomerates were smoother and the spherical shape was more perfect. X-ray diffraction analysis of the CCPs of the four NEPE propellants under 3 MPa revealed the presence of both Al and Al 2 O 3 . With the increase of the particle size of Al and AP, the oxidation degree of aluminum particles decreases. The particle size of the CCPs of the four different formulations of NEPE propellants under 1 and 3 MPa was analyzed by using a laser particle size analyzer, it is found that the increase of AP particle size is helpful to reduce the size of condensate combustion products. Based on the classical pocket theory, establishing a new agglomeration size prediction model, which can be used to predict the agglomeration size on the burning surface. Compared with the empirical model, the new agglomeration size prediction model is in good agreement with the experimental results.

Effect of Nano-Nickel Powder on Combustion Properties of Al-CMDB and CL-20-CMDB Propellants

Research on the Combustion Properties of Propellants with Low Content of Nano Metal Powders

Influence of Nickel Powders on Burning Behaviors of Single-Based Propellant in Variable-Pressure and Constant-Pressure Combustion Conditions

Laser Ignition and Combustion Properties of Composite Propellant Containing Nanometal Powders

Effect of the Nanometer Carbonate on Combustion Properties of Composite Solid Propellants

Research on the Ignition and Combustion Properties of Composite Propellant Containing Nano Metal Powders

Application And Properties Of Nano-Sized Rdx In Cmdb Propellant With Low Solid Content

Effect of Pressure on Condensing Ignition and Combustion Characteristics of Nano-Aluminum/RDX Mixture

Catalytic activity of nano-sized CuO on AP-CMDB propellant

Application of Nano‐Sized RDX in CMDB Propellant with High Solid Content

Study on Effect of Pressure on Ignition,Combustion and Agglomeration Characteristics of GAP/CL-20 Propellant

Impacts on Combustion Behavior of Adding Nanosized Metal Oxide to CH3N5-Sr(NO3)2 Propellant

Effect of NdCoO3 nanopowder on combustion properties of ball bonding high-burning rate propellant

Application Of Nanometer Materials For Solid Propellants

Improved Combustion Performance of Solid Propellant with Sliver Nanoparticle Decorated Al Addition

A model for the combustion behavior of AP/HTPB propellant containing ultrafine aluminum

Combustion performance modulation and agglomeration inhibition of HTPB propellants by fine Al/oxidizers integration

Effect of aluminum and ammonium perchlorate particle sizes on the condensed combustion products characteristics of aluminized NEPE propellants

Catalysis of nano-NiCu composite powder on the pyrolysis of AP and AP/HTPB propellant

Experimental study on microwave ignition of ADN-based liquid propellant droplets doped with alumina nanoparticles

A study on modification of aluminum powder by ammonium perchlorate and glycidyl azide polymer to improve its combustion