Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

Flexible ReS2 nanosheets/N-doped carbon nanofibers-based paper as a universal anode for alkali (Li, Na, K) ion battery

A robust, highly reversible, mixed conducting sodium metal anode

Encapsulating segment-like antimony nanorod in hollow carbon tube as long-lifespan, high-rate anodes for rechargeable K-ion batteries

High rate and long cycle life porous carbon nanofiber paper anodes for potassium-ion batteries

Sandwiched ReS2 nanocables with dual carbon coating for efficient K+/Na+ storage performance

ReS2-based electrode materials for alkali-metal ion batteries

Rayleigh-Instability-Induced Bismuth Nanorod@Nitrogen-Doped Carbon Nanotubes As A Long Cycling and High Rate Anode for Sodium-Ion Batteries

Carbon-coated ReS2 hierarchical nanospheres to inhibit polysulfide dissolution in ether-based electrolytes for high-performance Na-ion batteries

Superior ionic and electronic properties of ReN$_2$ monolayers as Na-ion battery electrodes

Nanoconfined ReS2 in biomass-derived 3D porous N-doped carbon architecture as anode for stable lithium-ion storage

Improving Na+ transport kinetics and Na+ storage of hierarchical rhenium-nickel sulfide (ReS2@NiS2) hollow architecture by assembling layered 2D-3D heterostructures

Designing N-doped Graphene/rese2/ti3c2 MXene Heterostructure Frameworks As Promising Anodes for High-Rate Potassium-Ion Batteries

A High Capacity, Good Safety and Low Cost Na2FeSiO4-Based Cathode for Rechargeable Sodium-Ion Battery.

Synergistic effect between 1T’-ReS2 nanosheet arrays and FeS2 nano-spindle in 1T’-ReS2@FeS2@NC heterostructured anode for Na+ storage

CNT Interwoven Nitrogen and Oxygen Dual‐Doped Porous Carbon Nanosheets As Free‐Standing Electrodes for High‐Performance Na‐Se and K‐Se Flexible Batteries

Construction of NiS Nanosheets Anchored on the Inner Surface of Nitrogen-Doped Hollow Carbon Matrixes with Enhanced Sodium and Potassium Storage Performances

Three-dimensional 1T-SnS2 wrapped with graphene for sodium-ion battery anodes with highly reversible sodiation/desodiation

Surface-Confined SnS2 @c@rgo As High-Performance Anode Materials for Sodium- and Potassium-Ion Batteries.

Ni3s2 Nanosheet-Anchored Carbon Submicron Tube Arrays As High-Performance Binder-Free Anodes For Na-Ion Batteries

Carbon Nanofibers Derived from Cellulose Nanofibers As A Long-Life Anode Material for Rechargeable Sodium-Ion Batteries

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks