Abstract:In recent times, MoNbTaW Refractory High Entropy Alloys (RHEAs) have drawn attention due to their exciting high-temperature applications and efforts are being made to improve their properties further. Alloying addition is an effective and practical approach to enhancing material properties. Ti is well known for its strength, low density, and corrosion resistance and its role in the properties of MoNbTaW-based RHEAs is required to be understood. RHEAs are commonly synthesized by vacuum arc melting (VAR) process and micro-segregation of the elements is reported. However, the effect of micro-segregation on MoNbTaW RHEAs is not well understood. Hence, the present work deals with the addition of Ti and micro-segregation on the structure, microstructure, and indentation behavior of MoNbTaW RHEAs. A novel non-equiatomic MoNbTa x Ti1-x W (x = 0, 1, and 0.5) RHEAs were prepared by vacuum arc melting (VAR) process. The structure and microstructure of these RHEAs were ascertained through X-ray diffraction (XRD) and transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with EDS for ascertaining the nominal chemical composition. The as-cast MoNbTa x Ti1-x W (x = 0, 1, and 0.5) RHEAs contains two BCC phase having slightly different lattice parameter i.e., BCC1 (a = 0.324 nm) and BCC2 (a = 0.323 nm) close to Ti and W respectively. These as-cast RHEAs having dendritic and inter-dendritic regions were found to be enriched in W and Ta, and Mo, Nb and Ti respectively. The microhardness of these RHEAs was investigated through instrumented indentation techniques. The microhardness of the BCC1 and BCC2 phases was found to be ∼4.5 GPa and 5.7 GPa. Further, the influence of Ti addition on the structure, elastic constant, and microhardness were estimated from the perspective of the first principle approximation. The special quasi-random structure (SQS) was used for first-principle calculations. The strengthening mechanisms influencing the mechanical properties in these BCC RHEAs were discussed in details. The experimental results were in good agreement with the results pertaining to theoretical modelling, demonstrating the effectiveness of these methods in predicting the structure and mechanical properties of RHEAs.

First-principle prediction of structural and mechanical properties in NbMoTaWRex refractory high-entropy alloys with experimental validation

First-principles Study on the Mechanical and Thermodynamic Properties of MoNbTaTiW

Compositional Effect on Microstructure and Mechanical Properties of AlNbTiZr-based Refractory High Entropy Alloys

Computational and experimental investigation of refractory high entropy alloy Mo<sub>15</sub>Nb<sub>20</sub>Re<sub>15</sub>Ta<sub>30</sub>W<sub>20</su b>

First-principles Calculation of the Effect of V Content on the Properties of NbMoTaWVx Refractory High-Entropy Alloys

Mechanical performance of (NbTaW)1−xMox (x = 0, 0.05, 0.15, 0.25) refractory high entropy alloys: Perspective from experiments and first principles calculations

First-principles calculations to investigate phase stability, elastic and thermodynamic properties of TiMoNbX (X=Cr, Ta, Cr and Ta) refractory high entropy alloys

Local Lattice Distortions, Phase Stability, and Mechanical Properties of NbMoTaWHfx Alloys: A Combined Theoretical and Experimental Study

Local lattice distortions, phase stability, and mechanical properties of NbMoTaWHf x alloys: A combined theoretical and experimental study

Structure and mechanical properties of novel lightweight refractory high entropy alloys NbMoTiZr-(Al/V): A combined first principles and experimental study

Mechanical properties and oxidation behavior of NbMoTaW x refractory high entropy alloys

Effect of alloying elements on the structure and mechanical properties of NbMoTaWX (X = Cr, V, Ti, Zr, and Hf) refractory high-entropy alloys

A Novel ZrNbMoTaW Refractory High-Entropy Alloy with In-Situ Forming Heterogeneous Structure

The improvement of room temperature plasticity of refractory high entropy alloy based on different first principles calculation models and experiment verification

Titanium alloying enhancement of mechanical properties of NbTaMoW refractory high-Entropy alloy: First-principles and experiments perspective

Microstructures and Mechanical Properties of TixNbMoTaW Refractory High Entropy Alloys

Effect of Mechanical Alloying and Sintering Behavior on the Microstructure and Properties of NbMoTaWRe Refractory High Entropy Alloy

Microstructure and mechanical properties of RexNbMoTaW high-entropy alloys prepared by arc melting using metal powders

A Systematic Investigation on Quaternary NbTiZr-based Refractory High Entropy Alloys Using Empirical Parameters and First Principles Calculations

Deformation behavior and yield strength prediction of [112] oriented NbMoTaW refractory high entropy alloy nanowires

Influence of micro-segregation on the microstructure, and microhardness of MoNbTaxTi(1-x)W refractory high entropy alloys: Experimental and DFT approach