Abstract:A plasma–catalyst hybrid system has been developed for the direct conversion of methane to C2+ hydrocarbons in dielectric barrier discharge (DBD) plasma. TiO2 presented the highest C2+ yield of 11.63% among different dielectric materials when integrated with DBD plasma, which made us concentrate on the TiO2-based catalyst. It was demonstrated that MnTi catalyst showed the best methane coupling performance of 27.29% C2+ yield with 150 V applied voltage, without additional thermal input. The catalytic performance of MnTi catalyst under various operation parameters was further carried out, and different techniques, such as X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and H2-temperature-programmed reduction were used to explore the effect of Mn loading on methane oxidative coupling (OCM) performance. The results showed that applied voltage and flow rate had a significant effect on methane activation. The dielectric particles of TiO2 loaded with Mn not only synergistically affected the coupling reaction, but also facilitated charge deposition to generate a strong local electric field to activate methane. The synergy effects boosted the OCM performance and the C2+ yield became 1.25 times higher than that of the undoped TiO2 under identical operating conditions in plasma, which was almost impossible to occur even at 850 °C on the MnTi catalyst in the absence of plasma. Moreover, the reaction activity of the catalyst was fully recovered by plasma regeneration at 300 °C and maintained its stability in for at least 30 consecutive cyclic redox tests. This work presents a new opportunity for efficient methane conversion to produce C2+ at low temperatures by plasma assistance.

Catalytic Oxidation of Dimethyl Sulfide over Commercial V-W/Ti Catalysts: Plasma Activation at Low Temperatures

VOCs degradation with non-thermal plasma and Ag-MnOx catalysis

Removal of Dilute VOCs in Air by Post-Plasma Catalysis over Ag-based Composite Oxide Catalysts

Characteristics of Back Corona Discharge in a Honeycomb Catalyst and Its Application for Treatment of Volatile Organic Compounds.

Removal of dimethyl sulfide by post-plasma catalysis over CeO2-MnO catalysts and reaction mechanism analysis

Decomposition of Dimethyl Sulfide in Dielectric Barrier Plasma Discharge Assisted by Active Carbon

Plasma-catalytic oxidation of toluene over MCeZrO x /TiO 2 (M = Cu, Mn, Ni and Co) catalysts using a dielectric barrier discharge reactor

Decomposition of Dimethyl Sulfide in a Wire-Cylinder Pulse Corona Reactor

Humidity and Oxygen Effects on Dimethyl Sulfide Decomposition Plasma Corona Reactor

Removal Characteristics of Gaseous Sulfur-Containing Compounds by Pulsed Corona Plasma

Unlocking the Potential of Cu/Ti3C2Tx MXene Catalyst in Plasma Catalytic CO2 Hydrogenation

Unlocking the Potential of Cu/TiCT MXene Catalyst in Plasma Catalytic CO2 Hydrogenation

Unlocking the Potential of Cu/Ti 3 C 2 T X MXene Catalyst in Plasma Catalytic CO 2 Hydrogenation

Enhanced Removal Performance and Economical Efficiency of Volatile Organic Sulfur Compounds by Silver-Modified ZSM-5 Zeolites under a High-Humidity Environment: A Mechanistic Study of the Adsorption-Plasma Catalytic Process

Decomposition of Dimethyl Sulfide with Non-Thermal Plasma Induced by Dielectric Barrier Discharge

Catalytic performance of plasma catalysis system with nickel oxide catalysts on different supports for toluene removal: Effect of water vapor

Deodorization of dimethyl sulfide using a discharge approach at room temperature

Performance Study on Simultaneous Tar Removal and Bio-Syngas Methanation by Combining Catalysis with Nonthermal Plasma

Treatment of V2O5/TiO2 by Non-Thermal Plasma: Changes in Surface Characters and Mercury Oxidation Activity

Removal of Hg0, NO, and SO2 by the surface dielectric barrier discharge coupled with Mn/Ce/Ti-based catalyst

Plasma-Enhanced Chemical Looping Oxidative Coupling of Methane through Synergy between Metal-Loaded Dielectric Particles and Non-Thermal Plasma