Optimizing the Parameters of a 12-Cavity Rising-Sun Relativistic Magnetron with Single-Stepped Cavities for $\pi $ -Mode Operation

Meiqin Liu,Chunliang Liu,Zhanqi Wang,Weihua Jiang,Edl Schamiloglu

DOI: https://doi.org/10.1109/tps.2016.2609922

IF: 1.368

2016-01-01

IEEE Transactions on Plasma Science

Abstract:We investigated the use of single-stepped cavities instead of typical tapered cavities in an A6 magnetron with diffraction output (MDO) and a 12-cavity MDO through particle-in-cell (PIC) simulations using MAGIC [1] and UNIPIC [2] in our earlier publications [3]-[5]. The interaction space, where the charged particles interact with the induced RF waves, was increased by replacing tapered cavities with single-stepped cavities in a 12-cavity rising-sun relativistic magnetron with diffraction output (RMDO) that the electronic efficiency of pi-mode generation in a 12-cavity rising-sun RMDO with single-stepped cavities driven by a transparent cathode [6] with gigawatt output power level can be as high as 83% for alpha = 12.5 degrees, 79% for a = 17.5 degrees, and 82% for a = 18.2 degrees at beta = 32 degrees, where a is the angle between the inner wall and the z-axis, and beta is the angle between the outer wall and the z-axis. When a, the angle between the inner wall and the z-axis, is changed, the depth of single-stepped cavities was changed. This would lead to the coupling between deep cavities and shallow cavities in the 12-cavity rising-sun MDO changing too, and which finally results in different frequencies of magnetron operation in the pi-mode. As we know, gigawatt nanosecond output power pulse is useful for the nanoradar system, and our PIC simulations found that when a 400-kV voltage pulse of 10-ns duration is applied to a 12-cavity rising-sun MDO driven by a transparent cathode or a solid cathode, the output power of the pi-mode can be as high as 1.5 GW. Without loss of generality, for alpha = 12.5 degrees and beta = 32 degrees, the peak efficiency of pi-mode generation in a 12-cavity rising-sun MDO with single-stepped cavities design is around 82% and occurs for voltage V similar to 400 kV +/- 50 kV. This paper describes optimizing the parameters in a 12-cavity rising-sun RMDO for the desired pi-mode operation.