Abstract:The superconducting magnet group at IHEP (the Institute of High Energy Physics, Chinese Academy of Sciences, China) has been engaging in the R&D of high field accelerator magnets since 2014 for the pre-study of the next-generation high energy particle accelerators like CEPC-SPPC (Circular Electron Positron Collider-Super Proton Proton Collider), FCC (Future Circular Collider), etc. A superconducting model dipole magnet named LPF1 was first fabricated with NbTi and Nb3Sn in a combined common-coil configuration in 2017 and tested in 2018, a main field of 10.23 T was reached within two 10 mm apertures. The magnet was reassembled with higher pre-stress in 2019 to investigate the influence of the pre-stress loading level on the performance of common-coil dipole magnets. The main field of this upgraded magnet named LPF1-S was increased to 10.71 T within two 12 mm apertures. By improving the key processing technologies in Rutherford cable fabrication, coil winding, Nb3Sn & NbTi splices soldering and coil impregnation, the recently fabricated model dipole magnet named LPF1-U attained a 12.47 T main field in two 14 mm apertures in 2021. To fully take advantage of Nb3Sn and NbTi superconductors in different field regions, LPF1-U was still designed and developed with a combined coil configuration with Nb3Sn for the inner two coils and NbTi for the outer four coils. Additionally, graded coil topology and different coil LSS (length of straight section) settings were adopted in the optimization of LPF1-U layouts. Bladder and key technology was used for the support structure, and fiber optic sensors based on FBG (fiber Bragg grating) were utilized to monitor the stress distribution and variation in the structures and coils through the whole process from magnet assembly to cool-down and excitation. During the performance test, a relatively large number of trainings were carried out and LPF1-U became more stable after the thermal cycle. A peak field of 12.7 T in the coils (12.47 T main field in apertures) corresponds to an operating current of 6865 A and a load line ratio of 90% was finally attained. It is worth mentioning that LPF1-U is the first hybrid-Nb3Sn, NbTi-common coil dipole magnet that has achieved a main field of more than 12 T in two apertures. The design, fabrication and performance analysis of the LPF series dipole magnets are presented in this paper.

Development and Performance of 65 T Fast-cooling User Magnet with Long Service Life

35 Kj/7 Kw Conduction-cooled High Tc Superconducting Magnet Energy Storage

Design and Test of a 90-T Nondestructive Magnet at the Wuhan National High Magnetic Field Center

Short and Long Pulse High Magnetic Field Facility at the Wuhan National High Magnetic Field Center

Concept Design of 100 T Pulsed Magnet at the Wuhan National High Magnetic Field Center

Design and Performance of the First Dual-Coil Magnet at the Wuhan National High Magnetic Field Center

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

High Temperature Superconducting Magnet for Fast Discharging Experiments

Experimental study on vacuum problem of conduction-cooled superconducting magnet system

Tests on a 6 T Conduction-Cooled Superconducting Magnet

High Magnetic Field Superconducting Magnet System Up to 25 T for ExCES

Development of a Superconducting Magnet for High Magnetic Force Application

Design and Fabrication of a Cross-Warm-Bore Split-Gap Superconducting Magnet System

The Pulsed High Magnetic Field Facility at HUST, Wuhan, China and Associated Magnets

A Long-Life, High-Capacity and High-Efficiency Cryogenic System Developed for High-Tc Superconducting Magnet Applications

Achievement of a High-Performance 30-Tesla Metal-As-insulated User Superconducting Magnet

Fabrication of A 10 Tesla Cryogen-Free Superconducting Magnet

Design of Superconducting Magnet for Background Magnetic Field

First performance test of a 25 T cryogen-free superconducting magnet

Development of Superconducting Model Dipole Magnets Beyond 12 T with a Combined Common-Coil Configuration

Strain analysis and preliminary test of an all-superconducting high-field magnet generating 32.4 T direct-current magnetic field