Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

GW TEM-Mode Phase Shifter for High-Power Microwave Applications

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

Planar Tunable High-Temperature Superconductor Microwave Broadband Phase Shifter with Patterned Ferroelectric Thin Film

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

Design of a tunable turnstile mode converter for high-power microwave applications

A novel high-power waveguide phase shifter with continuous linear phase adjustment

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Research on the Oversized and Compact TE01 Mode Bend with Hexagonal Waveguide for High-power Microwave Applications

Millimeter‐wave Phase Shifter Based on Waveguide‐mounted RF‐MEMS

A 340 GHz High-Power Multi-Beam Overmoded Flat-Roofed Sine Waveguide Traveling Wave Tube

High-Power Mechanical Waveguide Phase Shifter: Electromagnetic Resonance Analysis and Protection Design

A broadband and compact TE01 mode bend with hexagonal section for high-power microwave applications

X-band high power broadband mode-selective directional coupler

Fabrication and high-power testing of an X-band high-power phase shifter for the very compact inverse Compton scattering gamma-ray source

A gap waveguide-based mechanically reconfigurable phase shifter for high-power Ku-band applications

A 90-100Ghz Passive Phase Shifter with Transistor-Based Capacitor-loaded Technique

Circular TE0 n Mode Content Analysis Technique for High-Power Gyro-TWT System

Synthesis of Highly Oversized TE01 to TE11 Mode Converter Based on Elliptical Waveguide

A compact high-power microwave TM01-TE01 mode converter

Super Terahertz Phase Shifter Achieving High Transmission and Large Modulation Depth.