Abstract:Since 2002, ultra wideband (UWB) technology has ignited the interests of academia and industry for its potential of achieving high-speed wireless communication in short distance with low power. It is actively investigated today due to the wide available bandwidth for very high data rate up to 480Mb/s and low power service over short distances in 10m range. According to FCC (Federal Communications Commission), the frequency spectrum allocated for UWB is 3.1-10.6 GHz, and the spectrum shape of modulated output power and maximum power level are limited to -41.3dBm/MHz, which ensures that UWB can coexist with existing spectrum users like GSM(Global System of Mobile communication), WLAN(Wireless Local Area Network) and Bluetooth. Based on MB-OFDM(Multi-Band Orthogonal Frequency Division Multiplexing), WiMedia released the initial version of Physical Layer (PHY) Specification in September 2005. In this proposal, the UWB frequency spectrum from 3.1 GHz to 10.6 GHz is divided into 14 channels with 528MHz for each channel. These sub-bands are grouped into five band groups. It is seen that by increasing the signal bandwidth significantly, ultra-wideband achieves a high channel capacity and becomes an attractive solution to the ever-increasing data rate demands in wireless personal area networks (WPAN). In December 2005, European Computer Manufacturer's Association (ECMA) proposed the standard ECMA 368/369 on high-speed UWB physics layer and media access control layer based on MBOFDM scheme. This has pushed the industrialization of UWB technology to a new stage again. In China, UWB technology has also become a hot topic according to the issue of the UWB standard by Chinese Government in 2008. A new UWB scheme named dual carrierorthogonal frequency division multiplexing (DC-OFDM ) has been proposed and applied in China. In China standard, only the band from 6.2GHz to 9.4GHz and the band from 4.2GHz to 4.8GHz are available for UWB applications. These bands are partitioned into 14 subbands of 264MHz bandwidth which means the bandwidth is halved in China’s DC-OFDM standard compared with the ECMA 368/369 standard. Thus the sampling frequency of the DACs(Digital-to-Analog Converter) and ADCs(Analog-to-Digital Converter) are halved too. The power consumption of the system can be reduced greatly. Moreover, in DC-OFDM

An Elegant Solution: an Alternative Ultra-Wideband Transceiver Based on Stepped-Frequency Continuous-Wave Operation and Compressive Sensing

UWB-over-Multimode-Fiber Technology for Short- Range Communication Networks

Intersymbol Interference Cancellation for Ultra-Wideband Sensing and Communication Systems

A 7.5-Ghz Frequency-Hopping CDMA UWB Transceiver for Secure Multi-Sensor Connectivity

Overview of Ultra-Wideband Transceivers—system Architectures and Applications

Integrated Wideband Chip-Scale RF Transceivers for Radar Sensing and UWB Communications: A Survey

Multiple Signal Waveforms Adaptation in Cognitive Ultra-Wideband Radio Evolution

Filter-Banks for Ultra-Wideband Communications: Advantages and Design Challenges

A W-Band Communication and Sensing Convergence System Enabled by Single OFDM Waveform

Exploration and Performance Evaluation of a Compressed Sensing Based IR-UWB Receiver

Reconfigurable FM-UWB Transmitter Design for Robust Short Range Communications.

3 A 0 . 13 Um CMOS 6-9 GHz 9-Bands Double-Carrier OFDM Transceiver for Ultra Wideband Applications

Ultra-Wideband Wireless Channel and Environment Characterization Assisted by Dual Optical Frequency Comb

A Reconfigurable FM-UWB Transceiver for Short-Range Wireless Communications

Simultaneous Demodulation and Channel Sensing Using IR-UWB Signals

Low power, non invasive UWB systems for WBAN and biomedical applications

A 5-mW 750-kb/s Noninvasive Transceiver for Around-the-Head Audio Applications.

Multicarrier Waveform Design for mmWave/THz Integrated Sensing and Communication

Capacity-Approaching Transceiver Design For Asymmetric Uwb Links

A Dual-Carrier IR-based UWB Transmitter with Improved Spectral Efficiency

A high efficiency robust IR-UWB receiver design for high data rate CM-range communications