Abstract:The global shift towards zero carbon emissions has led to an increased demand for electricity, (e.g., For electrification of heat, transportation, etc.). High-temperature superconductor (HTS) cables offer a high-capacity and small-footprint solution compared to traditional cable technologies, making them ideal for densely populated areas. HTS cables, however, possess different electrical characteristics compared to conventional cables. This paper presents a specific case study of a 12.9 km long 275 kV HTS cable connecting Birkenhead Substation and Lister Drive Substation in the U.K. A dynamic electrical model incorporating the varying resistance of the HTS cable was constructed. The HTS cable model was integrated into an equivalent test network, representing conditions at the target site, to analyse its behaviour and impact on conventional power system protection performance via simulation case studies. The results indicate that differential protection operates reliably, while distance protection is impacted by the varying resistance. However, the proposed HTS cable design at the specified location presents a relatively small change in HTS cable resistance. The impact on distance protection was therefore minimal and can be addressed by considering HTS properties when determining distance protection settings. The study was conducted by considering manufacturer-supplied HTS parameters, network parameters reflective of an actual location in the U.K. grid, and protection requirements specified in the U.K. grid code. The study provides valuable insights into practicality and protection strategies for reliable HTS cable operation in a real-world transmission network. The findings can inform future HTS cable designs and installations globally, as well as provide a framework for further research in this area.

Simulation and Analysis on the Operational Characteristics of the Power Transmission Lines with a 110kV/3kA High Temperature Superconducting Cable in a Meshed Grid

Research on Compensation and Protection of Voltage in Metal Shield of 110kv Power Cable under Three Segments Unsymmetrical State

Simulation On Power Characteristic Of Uhvdc During Commutation Failure And Dc Block

Transient Analysis of HVDC HTS Cable in Power Grid Using Discretized Electrical-Thermal Model

Analysis of Thermo-electric Coupled Simulation for 10 Kv AC XLPE Cable under Different DC Topologies and Laying Modes

Research on Structure Optimization of Cold Dielectric High-Temperature Superconducting Cables

A Review on Insulation and Dielectrics for High- Temperature Superconducting Cables for Power Distribution: Progress, Challenges, and Prospects

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Research on overcurrent stability of HTS cable for energy pipeline

Research Status of High Temperature Superconducting Power Cable

Simulation and Analysis of Induced Voltage and Current on Overhead Ground Wire of Huainan～Wannan～Zhebei～Huxi 1000kv UHV AC Double-Circuit Transmission Line

Temperature Analysis of HTS Cables in Superconducting DC Energy Pipeline During Short-circuit Fault

HTS Cable Design for Aircraft Application Considering Fault Conditions

Study on secondary arc current of UHV line using HSGS

Design and Economic Analysis of 275 kV HTS Cable for UK Transmission Network

Numerical analysis of thermo-electric field for 10 kV AC XLPE cable in DC operation

HTS Cable and Protection System Study for UK's 275 kV Transmission Network

Simulation and analysis of induced voltage and induced current on overhead ground wire of Jindongnan-Nanyang-Jingmen 1000kV UHV AC transmission line

Simulation Analysis of Grounding Characteristics of Cable Based on ATP-EMTP