Abstract:Oil leakage results in serious environmental pollution and severe waste of resources, which makes the development of low-cost, environmentally friendly, high-capacity, and durable oil absorbents an urgent task. In this paper, superhydrophobic coatings of activated carbon (AC)–TiO2– were developed without using any fluorine-containing reagents. The TiO2 particles were grown on the AC surface to form AC–TiO2 powders. The hydrophilic AC–TiO2 powders were further grafted with polydimethylsiloxane (PDMS) molecules (AC–TiO2–PDMS) to achieve superhydrophobicity through covalent reaction between PDMS and TiO2 under UV light. The AC–TiO2–PDMS powder was mixed with a PDMS polymer to form a superhydrophobic coating solution, which made the commercial sponge obtain durable superhydrophobicity. It showed high liquid repellency and antifouling ability toward various liquids and drinks. Taking advantage of the large surface area and high absorption capacity of AC, the coated sponge showed superior high absorption capacity (up to 100–158 g/g) toward various oils and organic solvents with a high absorption speed. Besides, the sponge showed high reusability that could be repeatedly used to absorb various oils and organic solvents. Moreover, the sponge also presented photocatalytic capability, which could repeatedly photodegrade the oil contaminants without influencing the superhydrophobicity, therefore largely increasing the recyclability and lifetime of the sponge. It also could separate immiscible oil–water mixtures with high efficiency and continuously remove oils from water. It was chemically stable and mechanically durable and could resist various harsh conditions without losing its superhydrophobicity. This study developed a facile, cost-effective, and environmentally friendly method to fabricate very promising absorbents for large-scale oil and solvent cleanups and recovery.This article has not yet been cited by other publications.

Large-scale Blow Spinning of Carbon Microfiber Sponge As Efficient and Recyclable Oil Sorbent

A FACILE WAY TO PREPARE A SPONGE/CELLULOSE FIBER COMPOSITE AND ITS APPLICATION IN OIL/WATER SEPARATION

One-Step, Large-Scale Blow Spinning to Fabricate Ultralight, Fibrous Sorbents with Ultrahigh Oil Adsorption Capacity

Smart Sponge for Fast Liquid Absorption and Thermal Responsive Self‐Squeezing

Easy Synthesis of Light-weight Hierarchical Mesoporous Carbon Sponges for Efficient Oil Spill Recovery

High-Performance Multifunctional Carbon Fibrous Sponges Derived from Pitch

Blow Spinning of Polyimide/SiO2 Composite Fibrous Sponges with Excellent Adsorption Capacity and Recyclability

Green Fabrication of a Multifunctional Sponge as an Absorbent for Highly Efficient and Ultrafast Oil–Water Separation

Engineering 3D Porous Carbon Sponge as a Self-floating Solar Energy Utilization Platform for Photothermal Oil Spill Recovery and Photocatalytic H2 evolution

Co-blow-spinning of two-phase liquid to build Bead-Curtain fiber substructure for oil adsorption

Low-temperature carbonization synthesis of carbon-based super-hydrophobic foam for efficient multi-state oil/water separation

Fabrication of Oil-Absorbing Porous Sponges via 3D Electrospinning of Recycled Expanded Polystyrene with Functional Additive

A sustainable layered nanofiber/sheet aerogels enabling repeated life cycles for effective oil/water separation

Biomass-activated carbon-based superhydrophobic sponge with photothermal properties for adsorptive separation of waste oil

Recyclable Carbon Nanotube Sponges for Oil Absorption

Scalable fabrication of efficient and recycling wood residue-derived sponge for crude oil adsorption

Novel Magnetically Driven Superhydrophobic Sponges Coated with Asphaltene/Kaolin Nanoparticles for Effective Oil Spill Cleanup

Synthesis and Characterization of a Plasma Carbon Aerosol Coated Sponge for Recyclable and Efficient Separation and Adsorption

Photothermal and Joule heating-assisted thermal management sponge for efficient cleanup of highly viscous crude oil

Joule-heated carbonized melamine sponge for high-speed absorption of viscous oil spills

Fabrication cellulose/epoxy sponge via surface embedding for efficient and continuously oil/water separation