Abstract:In this paper, a new family of non‐isolated boost dc‐dc converters with high voltage gains is proposed with very high voltage gains at moderate duty cycles and lower switch voltage/current stresses with reduced component counts. The detailed analysis, and design methodology are presented for the proposed converter. The experimental results are presented for different duty cycles with fixed input voltage to verify the efficacy of the proposed structures in terms of higher boosting capability. In this paper, a new family of non‐isolated boost dc‐dc converters with high voltage gains is proposed. The proposed boost topologies exhibit very high voltage gains at moderate duty cycles and lower switch voltage/current stresses with reduced component counts. Here, a total of four new non‐isolated boost topologies are proposed using four‐terminal PWM high‐gain switch cells with an inductor‐switch network. Among these four topologies, two converters have identical voltage gain with opposite load voltage polarities and likewise other two exhibit similar nature (i.e., equal but opposite load voltage) but have higher gain than the former topologies. The detailed operating principle, steady‐state analysis, and design methodology are presented for the proposed positive output very high‐gain converter, which can be easily extended to the rest of the topologies. An exhaustive comparison study has been presented for the proposed topologies with the existing step‐up converters to highlight their advantages. Finally, the mathematical analysis, analytical studies, and high boosting feature of the proposed positive output high‐gain boost converter are verified using a 250 W, 50 kHz prototype. The experimental results are presented for different duty cycles with fixed input voltage to verify the efficacy of the proposed structures in terms of higher boosting capability.

A Family of Improved Magnetically Coupled Impedance Network Boost DC–DC Converters

A Family of Zero-Voltage-Transition Magnetic Coupling Bidirectional DC/DC Converters

Applying Diode-Capacitor Voltage Multiplier to Coupled-Inductor Boost Converter for Novel DC-DC Converter with High Voltage Gain and Low Voltage Stress

Analysis of a Coupled Inductor Boost Three-Port Converter with High Voltage Gain for Renewable Energy Systems

High Step-Up Y-Source Coupled-Inductor Impedance Network Boost DC–DC Converters with Common Ground and Continuous Input Current

Voltage-Double Magnetically Coupled Impedance Source Networks

A new family of high gain boost DC‐DC converters with reduced switch voltage stress for renewable energy sources

An Improved Boost-Type Hybrid Converter with Multiple Outputs

A Family of Transformer-Less Single-Switch Dual-Inductor High Voltage Gain Boost Converters with Reduced Voltage and Current Stresses

A Modified Y-Source DC–DC Converter with High Voltage-Gains and Low Switch Stresses

A New Dc-Dc Multilevel Breed Of Xy Converter Family For Renewable Energy Applications: Ly Multilevel Structured Boost Converter

An Improved Coupled-Inductor Impedance Source Network with More Freedom in Winding Match

Simple Topologies of PWM AC-AC Converters

A novel interleaving and magnetically integrated high gain boost converter used in new energy power system

Two Coupled Inductor Based High Gain DC-DC Converters

Novel High Step-Up DC–DC Converter with an Active Coupled-Inductor Network for a Sustainable Energy System

Comparison of Conventional DC-DC Converter and a Family of Diode-Assisted DC-DC Converter in Renewable Energy Applications

A Family of Isolated Interleaved Boost and Buck Converters with Winding-Cross-Coupled Inductors

A Family of High Gain Converters Based on Switched Inductor and Switched Capacitor Units

An Enhanced-Boost Coupled-Inductor Impedance Network Inverter Without Limitation of Inductor Parameters

Improved small signal model for voltage-boosting converter with hybrid energy pumping