Abstract:A flexible electronic-nose (E-nose) was constructed by assembling graphene oxide (GO) using different types of metal ions (Mx+) with different ratio of GO to Mx+. Owing to the cross-linked networks, the Mx+-induced assembly of graphene films resulted in different porous structures. A chemi-resistive sensor array was constructed by coating the GO-M hybrid films on PET substrate patterned with 8 interdigited electrodes, followed by in situ reduction of GO to rGO with hydrazine vapor. Each of the sensing elements on the sensor array showed a cross-reactive response toward different types of gases at room temperature. Compared to bare rGO, incorporation of metal species into rGO significantly improved sensitivity owing to the additional interaction between metal species and gas analyte. Principle component analysis (PCA) showed that four types of exhaled breath (EB) biomarkers including acetone, isoprene, ammonia, and hydrothion in sub-ppm concentrations can be discriminated well. To overcome the interference from humidity in EB, a protocol to collect and analyze EB gases was established and further validated by simulated EB samples. Finally, clinical EB samples collected from patients with lung cancer and healthy controls were analyzed. In a 106 case study, the healthy group can be accurately distinguished from lung cancer patients by linear discrimination analysis. With the assistance of an artificial neural network, a sensitivity of 95.8% and specificity of 96.0% can be achieved in the diagnosis of lung cancer based on the E-nose. We also find that patients with renal failure can be distinguished through comparison of dynamic response curves between patient and healthy samples on some specific sensing elements. These results demonstrate the proposed E-nose will have great potential in noninvasive disease screening and personalized healthcare management.

How well does your E-nose detect cancer? Application of artificial breath analysis for performance assessment

A Portable Electronic Nose Intended for Home Healthcare Based on a Mixed Sensor Array and Multiple Desorption Methods

Electronic Nose for Detecting Lung Cancer Based on Virtual Gas Sensor Array

A Study of the Volatile Organic Compounds Exhaled by Lung Cancer Cells in Vitro for Breath Diagnosis

An Electronic Nose-Based Assistive Diagnostic Prototype for Lung Cancer Detection with Conformal Prediction

Development Of Electronic Nose For Diagnosis Of Lung Cancer At Early Stage

MOS Sensors Array for the Discrimination of Lung Cancer and At-Risk Subjects with Exhaled Breath Analysis

Prediction of lung cancer with a sensor array based e-nose system using machine learning methods

Recognizing lung cancer and stages using a self-developed electronic nose system

Online breath analysis using metal oxide semiconductor sensors (electronic nose) for diagnosis of lung cancer

Artificial Intelligence Based Breath Analysis System for the Diagnosis of lung cancer

Chemiresistive Sensor Array with Nanostructured Interfaces for Detection of Human Breaths with Simulated Lung Cancer Breath VOCs

A study of an electronic nose for detection of lung cancer based on a virtual SAW gas sensors array and imaging recognition method

A Mobile E‐Nose Prototype for Online Breath Analysis

Non-Invasive Detection and Staging of Colorectal Cancer Using a Portable Electronic Nose

Point-of-care breath sample analysis by semiconductor-based E-Nose technology discriminates non-infected subjects from SARS-CoV-2 pneumonia patients: a multi-analyst experiment

Low-Cost Lung Cancer Detection Using Machine Learning on Breath Samples

Detection of COVID-19 through breath sample analysis with an electronic nose

An e-nose made of carbon nanotube based quantum resistive sensors for the detection of eighteen polar/nonpolar VOC biomarkers of lung cancer

Constructing an E-Nose Using Metal-Ion-Induced Assembly of Graphene Oxide for Diagnosis of Lung Cancer Via Exhaled Breath

The electronic nose technology in clinical diagnosis: A systematic review