Abstract:Solid oxide electrolysis cell (SOEC) is a promising energy conversion device for the efficient conversion of CO2 into valuable chemicals by using renewable energy sources. Fe-based perovskite oxides are highly active for CO2 electrochemical reduction as fuel electrodes in SOECs. Herein, high valence cations doped La0.6Sr0.4FeO3-δ oxides (La0.6Sr0.4FeO3-δ, La0.6Sr0.4Fe0.9Sc0.1O3-δ, La0.6Sr0.4Fe0.9Ta0.1O3-δ, La0.6Sr0.4Fe0.9W0.1O3-δ) are used as fuel electrodes in SOECs for CO2 electrolysis, and the crystal structure, electrical conductivity, chemical surface exchange coefficient (K chem), chemical bulk diffusion coefficient (D chem) and electrolysis performance are investigated for CO2 electrolysis. In addition, we determine the electrochemical processes on half cells and single cells with La0.6Sr0.4FeO3-δ series fuel electrodes by distribution of relaxation times (DRT) analysis, respectively. The results show that W-doping introduces more highly oxidative oxygen species O2 2−/O− and decreases the activation energy of lattice oxygen diffusion, thus accelerating the oxygen ion diffusion kinetics. The value of D chem for La0.6Sr0.4Fe0.9W0.1O3-δ reaches to 4.671 × 10−4cm2 S−1 at 800 °C, and this value is 3.8 times than that of La0.6Sr0.4FeO3-δ (1.216 × 10−4cm2 S−1). DRT analysis indicates the different rate-limiting steps for CO2 reduction reaction (CO2RR) on half cells and single cells, which are the dissociation of carbonate intermediate process on half cells, and the exchange and diffusion of oxygen ions process on single cells. W-doping remarkably improves the oxygen ion transport property, thus enhancing the single cell performance for CO2 electrolysis. The single cell with La0.6Sr0.4Fe0.9W0.1O3-δ fuel electrode demonstrates a high current density of 1.48 A cm−2 at 800 °C and 1.5 V, with the polarization resistance (Rp) of 0.527 Ω cm2 at open circuit voltage (OCV). Meanwhile, the single cell exhibits good stability for 50 h at an applied voltage of 1.2 V. This work reveals the difference in electrochemical processes on half cells and single cells, and provides a strategy to accelerate the CO2RR kinetics of La0.6Sr0.4FeO3-δ-based materials.

Enhancement Effects of Dopants and Sio2 Support on Mixed Metal Ferrites Based Two-Step Thermochemical Water Splitting

Gd, La co-doped CeO2 as an active support for Fe2O3 to enhance hydrogen generation via chemical looping water gas shift

Enhanced Oxygen Evolution Reaction Activity of LaFeO3 with Co-Pi Decoration

Copper and Cobalt Co-Doped Ferrites As Effective Agents for Chemical Looping CO2 Splitting

Two-step Thermochemical Cycles for CO2 Splitting on Zr-doped Cobalt Ferrite Supported on Silica

Redox Performance and Optimization of the Chemical Composition of Lanthanum–Strontium–Manganese-Based Perovskite Oxide for Two-Step Thermochemical CO2 Splitting

Spinel-Structured Ternary Ferrites As Effective Agents for Chemical Looping CO2 Splitting

Chemical-looping water splitting over ceria-modified iron oxide: Performance evolution and element migration during redox cycling

Enhanced oxygen bulk diffusion of La0.6Sr0.4FeO3-δ fuel electrode by high valence transition metal doping for direct CO2 electrolysis in solid oxide electrolysis cells

The Use of Ferrites As Highly Active Oxygen Storage Materials for Chemical Looping Hydrogen Production under Intermediate Temperature

Cu/LaFeO3 As an Efficient and Stable Catalyst for CO2 Reduction: Exploring Synergistic Effect Between Cu and LaFeO3

Ternary Mixed Spinel Oxides As Oxygen Carriers for Chemical Looping Hydrogen Production Operating at 550 °C

Thermochemical Activity of Single- and Dual-Phase Oxide Compounds Based on Ceria, Ferrites, and Perovskites for Two-Step Synthetic Fuel Production

Selection of Iron-Based Oxygen Carriers for Two-Step Solar Thermochemical Splitting of Carbon Dioxide

Iron Oxides with Gadolinium-Doped Cerium Oxides As Active Supports for Chemical Looping Hydrogen Production

Thermochemical CO2 Splitting Reaction with Supported LaxA1−xFeyB1−yO3 (A = Sr, Ce, B = Co, Mn; 0 ⩽ X, Y ⩽ 1) Perovskite Oxides

Optimization of nickel-iron bimetallic oxides for coproduction of hydrogen and syngas in chemical looping reforming with water splitting process

Enabling High and Stable Electrocatalytic Activity of Iron‐Based Perovskite Oxides for Water Splitting by Combined Bulk Doping and Morphology Designing

Regulating Crystal Structure and Atomic Arrangement in Single-Component Metal Oxides through Electrochemical Conversion for Efficient Overall Water Splitting

Highly sintering-resistant iron oxide with a hetero-oxide shell for chemical looping water splitting

Active sites engineering construction of spinel cobalt oxide based excellent bifunctional electrocatalyst for water splitting by modifying oxygen vacancy with S dopant