Abstract:Single‐crystal seeds are embedded in PbI2 films as nucleation sites to promote the rapid formation of high‐quality α‐phase formamidinium lead triiodide (α‐FAPbI3). The formamidine lead bromide (FAPbBr3) seed epitaxial growth crystallization method through a halogen anion exchange process achieves a high‐performance perovskite solar cell with prominent power conversion efficiency of 23.84% and impressive open circuit voltage of 1.18 V. α‐phase formamidine lead iodine (α‐FAPbI3) as a competitive candidate to pursue high‐performance perovskite solar cells (PSCs) suffers from the weakness of random nucleation and disordered growth in chasing high‐grade polycrystalline films. Here, single‐crystal seeds crystallization (SCSC) method is proposed to obtain high‐quality α‐FAPbI3 perovskite films for the first time. Six single‐crystals seeds (CsPbBr3, CsPbI3, FAPbBr3, FAPbI3, MAPbBr3, and MAPbI3) are employed to regulate α‐FAPbI3 perovskite crystallization. These seeds act as nucleation sites and allow the perovskite to grow directly. The rapid crystallization significantly improves the crystallinity of perovskite films with uniform morphology, large grain size, and less defects. Of particular note, FAPbBr3 seed prefers to grow α‐FAPbI3 epitaxially from FAPbBr3@PbI2 heterostructure through a halogen anion exchange process. The average grain size of FAPbBr3‐perovskite film is boosted to 2.6 μm, and the trap density reduced by 11 times. The resultant FAPbBr3‐PSCs achieve a maximum power conversion efficiency (PCE) of 23.84% with a high open‐circuit voltage of 1.18 V. The unencapsulated PSC retains 91% of the initial PCE after 3000 h of storage at ≈30–50% relative humidity and preserves 98.5% of the original value after 155 h illumination with maximum power point tracking.

Hybrid Perovskite by Mixing Formamidinium and Methylammonium Lead Iodides for High-Performance Planar Solar Cells with Efficiency of 19.41%

Mixed-Organic-Cation (FA)x(MA)1-xPbI3 Planar Perovskite Solar Cells with 16.48% Efficiency via a Low-Pressure Vapor-Assisted Solution Process

Phase Engineering of Perovskite Materials for High-Efficiency Solar Cells: Rapid Conversion of CH3NH3PbI3 to Phase-Pure CH3NH3PbCl3 Via Hydrochloric Acid Vapor Annealing Post-Treatment

High performance planar perovskite solar cells with a perovskite of mixed organic cations and mixed halides, MA1−xFAxPbI3−yCly

High‐Performance Inverted Planar Heterojunction Perovskite Solar Cells Based on Lead Acetate Precursor with Efficiency Exceeding 18%

High-Performance Simple-Structured Planar Heterojunction Perovskite Solar Cells Achieved by Precursor Optimization.

High Efficient Planar-Heterojunction Solar Cells Achieved by Using A Smooth Ch3nh3pbi3 Film Via A New Approach of Forming the Pbi2 Nanostructure Together with Strategically High Ch3nh3i Concentration

Multifunctional anion-cation modulation engineering for Sn-Pb perovskite solar cells

Perovskite seeding growth of formamidinium-lead-iodide-based perovskites for efficient and stable solar cells

Single‐Crystal Seeds Inducing the Crystallization of High‐Performance α‐FAPbI3 for Efficient Perovskite Solar Cells

Stable α‐FAPbI3 via porous PbI2 for efficient perovskite solar cells

Reduced Defects of MAPbI3 Thin Films Treated by FAI for High‐Performance Planar Perovskite Solar Cells

Resolving Mixed Intermediate Phases in Methylammonium-Free Sn–Pb Alloyed Perovskites for High-Performance Solar Cells

Incorporating an Inert Polymer into the Interlayer Passivates Surface Defects in Methylammonium Lead Halide Perovskite Solar Cells.

Mixed Cation FAxPEA1–xPbI3 with Enhanced Phase and Ambient Stability toward High‐Performance Perovskite Solar Cells

Crystallization and Defect Chemistry Dual Engineering for MAPbI3 Perovskite Solar Cells with Efficiency Approaching 22%

Semitransparent CH3NH3PbI3 Films Achieved by Solvent Engineering for Annealing‐ and Electron Transport Layer‐Free Planar Perovskite Solar Cells

Efficient and Non-Hysteresis CH3NH3PbI3/PCBM Planar Heterojunction Solar Cells

Solvent Engineering for High-Quality Perovskite Solar Cell with an Efficiency Approaching 20%

Defect suppression and energy level alignment in formamidinium-based perovskite solar cells

Stabilizer-assisted Growth of Formamdinium-Based Perovskites for Highly Efficient and Stable Planar Solar Cells with over 22% Efficiency