Abstract:In this work, methylammonium lead triiodide (CH3NH3PbI3) perovskite solar cells with efficiencies higher than 18% were achieved using a new nanocomposite hole transport layer (HTL) by doping poly(ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) with a mixed dopant of polyaniline (PANI) and graphene oxide (GO). A synergistic engineering between GO, PANI, and PEDOT:PSS was accomplished to introduce additional energy levels between perovskite and PEDOT:PSS and increase the conductivity of PEDOT:PSS. Kelvin probe force microscope results confirmed that adding GO to PEDOT:PSS/PANI composite significantly reduced the average surface potential. This increased the open circuit voltage (V-oc) to 1.05 V for the GO/PEDOT:PSS/PANI nanocomposite perovskite solar cells from the pristine PEDOT:PSS (V-oc= 0.95 V) and PEDOT:PSS/PANI (V-oc= 0.99 V). In addition, adding PANI to the HTLs substantially enhanced short circuit current density (J(sc)). This was supported by the current sensing-atomic force microscopy (CS-AFM) and conductivity measurements. The PANI doped films showed superior electrical conductivity compared with those without PANI as indicated by CS-AFM results. PANI can fill the gaps between the microflakes of GO and give rise to more compact hole transport material (HTM) layer. This led to a higherJ(sc)after doping with PANI, which was consistent with the incident photon-to-current efficiency and electrochemical impedance spectroscopy results. The results of X-ray diffraction (XRD) and AFM indicated the GO/PANI doped HTMs significantly improved the crystallinity, topography, and crystal size of the perovskite film grown on their surface. A higher efficiency of 18.12% for p-i-n perovskite solar cells has been obtained by adding the mixed dopant of GO, PANI, and PEDOT:PSS, demonstrating better stability than the pristine PEDOT:PSS cell.

Graphene Oxide Modified Hole Transport Layer for Ch3nh3pbi3 Planar Heterojunction Solar Cells

Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor.

Improved Performance of Hole-Transporting Layer-Free Perovskite Solar Cells by Using Graphene Oxide Sheets As the Nucleation Centers

Enhancing the Performance of Planar Heterojunction Perovskite Solar Cells Using Stable Semiquinone and Amine Radical Modified Hole Transport Layer

Moderately Reduced Graphene Oxide/pedot:Pss As Hole Transport Layer to Fabricate Efficient Perovskite Hybrid Solar Cells

Synergistic engineering of hole transport materials in perovskite solar cells

Efficient and Stable Planar Heterojunction Perovskite Solar Cells with an MoO3/PEDOT:PSS Hole Transporting Layer.

Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Perovskite Solar Cells Based On Graphene Oxide Hole Transport Layer

Hybrid UV-Ozone-Treated Rgo-Pedot:Pss As an Efficient Hole Transport Material in Inverted Planar Perovskite Solar Cells.

Stable High-Performance Hybrid Perovskite Solar Cells with Ultrathin Polythiophene As Hole-Transporting Layer

Efficiency Enhancement in Inverted Planar Perovskite Solar Cells by Synergetic Effect of Sulfated Graphene Oxide (sgo) and PEDOT:PSS As Hole Transporting Layer

Efficient perovskite/fullerene planar heterojunction solar cells with enhanced charge extraction and suppressed charge recombination.

Noncovalent Phosphorylation of Graphene Oxide with Improved Hole Transport in High-Efficiency Polymer Solar Cells

Improved Performance of Perovskite Solar Cells with a TiO2/MoO3 Core/shell Nanoparticles Doped PEDOT:PSS Hole-Transporter

Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells.

Polyaniline/Reduced Graphene Oxide Composites for Hole Transporting Layer of High-Performance Inverted Perovskite Solar Cells

High-performance hybrid perovskite solar cells with polythiophene as hole-transporting layer via electrochemical polymerization

Composited Film of Poly(3,4-ethylenedioxythiophene) and Graphene Oxide as Hole Transport Layer in Perovskite Solar Cells

Effect of doped polyaniline/graphene oxide ratio as a hole transport layer on the performance of perovskite solar cell

Efficient and Air-Stable Planar Perovskite Solar Cells Formed on Graphene-Oxide-Modified PEDOT:PSS Hole Transport Layer