Abstract:This paper introduces a highly effective four-port MIMO antenna that is both compact and powerful. This antenna is specifically designed to cater to dual-band 5G applications at the frequencies of 28/38. The antenna radiating electromagnetic energy employs a single element that operates seamlessly at both resonant frequencies mentioned while having a compact size of 9.5 mm × 7.5 mm Rogers/Duroid RT-5870 laminate, which boasts a thickness of 0.254 mm. Slot etching and stub insertion techniques are employed, and the antenna's dimensions are adjusted to achieve resonance at certain frequencies. This resulted in a peak realized gain of over 5 dB for both the 28 GHz and 38 GHz frequencies, using just one antenna element. The element is then examined for three different two-port configurations to determine the optimal arrangement for maximum isolation. Finally, the design was expanded to a four-port MIMO with elements placed in a unique proposed configuration having dimensions of 15 × 15 × 0.254 mm 3 . Spatially and uniquely configured elements provided the isolation of less than −20 dB for required bands having measured MIMO parameters within the standard acceptable values. Recorded values of the measured envelope correlation coefficient (ECC) are found to be less than 0.1 at both 28 GHz and 38 GHz frequencies. Moreover, the diversity gain (DG) is greater than 9.95 dB at 28 GHz and over 9.99 dB at 38 GHz, while the total active reflection coefficient (TARC) is less than 0 dB for both frequencies. The channel capacity loss (CCL) has also been found to be less than 0.2 bits/s/Hz. The proposed single element and the four-port design are also analyzed for conformality which witnessed a minor change in impedance bandwidth at a bent of 15°, 25°, 35° and 45° making it applicable for wearable devices in the 5G spectrum. The specific absorption ratio for single as well as four ports is also found to be much less than the standard acceptable values making the antenna useful for embedded and wearable devices for humans. The four-port MIMO is reported with an SAR value of 0.0105 W/Kg at 28 GHz and SAR of 0.0416 W/Kg at 38 GHz making the antenna safe for embedded devices for wireless communication.

A 28 GHz wideband planar stepped-shaped MIMO antenna with isolating metallic sheet for 5G millimeter wave communications

Dual-band millimetre wave MIMO antenna with reduced mutual coupling based on optimized parasitic structure and ground modification

Characteristic mode based self isolated MIMO antenna design for millimeter wave 5G communications

A Wideband Circularly Polarized Four Port Microstrip MIMO Antenna with High Gain and Enhanced Isolation for 5G Millimeter Frequency Applications

A Compact MIMO Antenna Based on Modal Analysis for 5G Wireless Applications

High-Isolation MIMO Antenna for 5G Millimeter-Wave Communication Systems

A compact 6‐shaped high isolation MIMO antenna for 28 GHz 5G applications

Design, fabrication, and measurement of a miniaturized MIMO antenna applicable for 5G communication

Compact Elliptical Slot Millimeter-Wave MIMO Antenna for 5G Applications

A Compact MIMO Antenna for 5G NR Frequency Bands n257/n258/n261 Under Millimeter-Wave Communication

Mobile-integrated SRR-based four-port MIMO antenna for broadband mm-wave 5G applications

A Compact Wideband Printed 4 × 4 MIMO Antenna with High Gain and Circular Polarization Characteristics for mm-wave 5G NR n260 Applications

A Compact Ultra-Wideband Millimeter-Wave Four-Port Multiple-Input Multiple-Output Antenna for 5G Internet of Things Applications

Evaluating the performance measurement of novel octangular star shaped micromachined substrate with self-isolated 8 × 8 port MIMO antenna for dual band 28 GHz (n261) and 39 GHz (n260) millimeter-wave 5G applications

Wearable and ultra-compact mm-wave four port MIMO antenna for dual band n261 and n260 (28/38) GHz 5G applications

A square split ring resonator-based metamaterial integrated high gain 4 × 4 MIMO antenna with circular polarization for wideband 5G millimeter-wave applications

A High Isolation UWB MIMO Vivaldi Antenna Based on CSRR-NL for Contemporary 5G Millimeter-Wave Applications

A flexible dual-band 4 × 4 MIMO antenna for 5G mm-wave 28/38 GHz wearable applications

An Eight-Port Circularly Polarized Wideband MIMO Antenna Based on a Metamaterial-Inspired Element for 5G mmWave Applications

CSRR backed compact two-port, dual-band MIMO antenna for mm-wave applications

Wideband Four-Port Single-Patch Antenna Based on the Quasi-TM 1/2,1/2 Mode for 5G MIMO Access-Point Application