Abstract:Considering the nonlinearity and uncertainty of a high-speed flexible parallel mechanism,a robust model predictive control strategy was presented to suppress the vibration response of the system.Piezoceramic patch actuator and strain gauge sensors were used.The finite element method and modal truncation technique were applied to obtain the dynamic model of the mechanism.The nonlinear,coupling factors and high-order modal effects existing in the dynamic model of the system were considered as disturbances.The modal force was treated as an uncertain disturbance and the measurement noise was considered.The predictive model of the system dynamic response was introduced and the output was forecasted by the model.A Kalman filter estimator was designed to estimate the state variables of the system.A standard quadratic programming optimization problem was formed where the performance index function minimizes a quadratic performance function.The constraints were the control input voltage and its change rate.The optimization problem was solved to obtain the optimal control output voltages and a rolling optimization control system was then constructed to suppress the vibration response of the system.The optimum placements of the actuators and sensors were determined by using the controllability index featured as actuating energy and the observability index featured as signal energy.Taking a novel 2-DoF parallel mechanism as an example,the experimental modal method was applied to obtain the first two natural frequencies and damping ratios.Comparing with the results obtained by the finite element method,it shows that the theoretical model is not accurate enough.Using dSPACE real-time simulation system and MATLAB/Simulink,the control system was built and the vibration control experimental study was carried out.The experimental results show the proposed controller can effectively suppress the vibration response,and the effectiveness and robustness of the controller was verified.

Speed Control and Resonance Suppression of Flexible Joint System Based on Singular Perturbation Method and Kalman Filter

A Resonance Suppression Method Based on Kalman State Estimation and Load Torque Compensation for Flexible Load Driven by Permanent Magnet Synchronous Motor

System Identification and a Model-Based Control Strategy of Motor Driven System with High Order Flexible Manipulator.

Resonant Suppression of Flexible System by Feedback Compensation of Resonant Frequencies

Singular Perturbation Control for Flexible-Joint Manipulator

Resonant suppression of flexible system using band-stop filter

Active Vibration Control of a High-Speed Flexible Robot Using Variable Structure Control

Decoupled Dynamic Model and Control of Flexible Space Manipulator

Vibration control of a high-speed flexible parallel mechanism based on model predictive control

Resonance Suppression Method Based on Load Position Feedback for Flexible Load Driven by PMSM

A new control method of flexible-joint manipulator with harmonic drive

On the Modeling and Composite Control of Flexible Parallel Mechanism

Modeling and Simulation of a Flexible Inverted Pendulum System

Active Control of a 6-DOF Space Robot with Flexible Panels Using Singular Perturbation Method

Vibration suppression of flexible parallel manipulator based on sliding mode control with reaching law

A model-based PID-like motion control method for flexible-joint manipulator with harmonic drives

Data-driven control of singularly perturbed hybrid systems with multi-rate sampling

Modeling and controller design for complex flexible nonlinear systems via a fuzzy singularly perturbed approach

Modeling and Precise Position Control of Flexible Joints with Harmonic Drives

Integrated Fixed Time Sliding Mode Control for Motion and Vibration of Space Robot with Fully Flexible Base–Link–Joint

Model Predictive Control Applied to Different Time-Scale Dynamics of Flexible Joint Robots