Abstract:Geared motor-driven lower limb exoskeletons (LLEs) are widely researched to assist paraplegic patients with spinal cord injury in recovering locomotion ability. In order to achieve a compact exoskeleton joint design while avoiding increasing the mechanical complexity of the exoskeleton frame, this study presents a design of an LLE with compact and modular actuation. A synchronous drive and a gear drive as transmissions are used to distribute hip and knee actuators, respectively, ensuring a compact axial width. The modular design of joint actuators enables it simple to separately design or select the ergonomic exoskeleton frames. A paradigm of the LLE design is comprehensively provided, including the requirement analysis, mechanical, electrical and control system design, which can be a reference of the early development of the exoskeleton prototype. The performance of the LLE is preliminarily validated by the benchtop tests including the closed-loop speed bandwidth test and the swing test and one healthy human subject experiments including walking with the LLE disenabling all motors and walking assisted by the LLE. The results of the benchtop tests validate that the LLE has enough bandwidth of closed-loop speed, satisfactory repeatability, high precision, good antijamming capability and strong torque capacity. The results of the healthy human subject experiments validate a harmonic interaction and a good integration between the user and the ergonomic mechanical system, good performance of the electrical and control system in joints motion control of the LLE. The prototype of the LLE smoothly and successfully assists the healthy human subject in walking on the level ground. The proposed LLE is promising to be applied to assist paraplegic patients in recovering the walking ability.

Design and construction of a cycling-based wheelchair prototype

Design and Simulation of Leg Exoskeleton Cycling-Actuated Wheelchair

Design and Control of Linkage Exoskeletons in Wheelchair.

Experimental Characterizations of Operation of Exoskeleton-Assisted Wheelchair

Design and Performance of BIT Lexochair, a Robotic Leg-Exoskeleton Assistive Wheelchair

Design of Multifunctional pedal-actuated wheelchair for locomotion and rehabilitation training

Design and Feasibility Study of a Leg-exoskeleton Assistive Wheelchair Robot with Tests on Gluteus Medius Muscles.

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Research of a New Rehabilitation and Assisting Robot

Wheelwalker: A Foot-Wheel Driving Exoskeleton for the Alternate Walk of Paraplegic Patients

A New Exoskeleton Prototype for Lower Limb Rehabilitation

Design and Preliminary Validation of a Lower Limb Exoskeleton with Compact and Modular Actuation

Hip Exoskeleton for Cycling Assistance

Foot-wheel Driven Exoskeleton for Rehabilitation Training of Paraplegic Patients

Design and validation of a lower limb exoskeleton employing the recumbent cycling modality for post-stroke rehabilitation

Lower Limb Exoskeleton Using Recumbent Cycling Modality for Post-stroke Rehabilitation

The Development and Preliminary Test of a Powered Alternately Walking Exoskeleton with the Wheeled Foot for Paraplegic Patients

Design and Experimental Verification of a Parallel Hip Exoskeleton System for Full-Gait-Cycle Rehabilitation

Design and Prototype a Stair-Climbing Wheelchair

Design and analysis of a multi-motion self-balancing lower limb exoskeleton based on flat terrain

Wheelchair design with variable posture adjustment and obstacle-overcoming ability