Abstract:Conventional stator–magnet moving-iron transverse-flux linear oscillatory machines (CSMTLOMs) are widely applied in directly-drive reciprocating devices due to the merits of easy fabrication and robust mover. However, in order to keep the mover vibrating at a certain resonance frequency to save the energy and enlarge the output power, they still suffer from a higher requirement on spring stiffness due to their thick and heavy mover core, which would also narrow the frequency band with a high power factor due to the large inertial energy storage of the heavy mover. Hence, to reduce the mover core weight to reduce the demand of the spring and improve the operation performance, an improved linear oscillatory machine featured by a spoke-type interior permanent magnet inner stator (ISMTLOM) is proposed. Benefiting from its separated two stators, the tangential flux in the radial plane can return through the inner stator core, so that the yoke of the mover core can be eliminated directly. Then, to analytically investigate the influence of the special axial local saturation effect, the segmental equivalent magnetic circuit (EMC) model of the ISMTLOM is established, wherein a saturation coefficient is introduced to quantitatively consider the local saturation effect on the output force. Consequently, several important size parameters are optimally selected when keeping the same outer diameter and copper loss as that of the CSMTLOM. Afterward, the three-dimension finite element algorithm (3D FEA) is adopted for the electromagnetic performance validation and comparison. Finally, it is found that the nonlinear segmental EMC corrected by the saturation coefficient can quickly predict the output force more accurately within the wide load range, and benefiting from the topology improvement, the ISMTLOM has the merits over the CSMTLOM in its smoother output force, much lighter mover core, and less demand of mechanical spring stiffness, whilst preserving the similar output force density.

Design, Analysis and Experiments of Novel Short-Stroke Linear Loading System Based on Axial-Magnetized Voice-Coil Motor for Linear Oscillating Actuator.

Modeling and Analysis of a Biaxial Noncontact Lorentz Force Actuator

Design and analysis on voice coil motors drive system

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

Design and Research of a Linear Actuator for Electric Vehicle Active Suspension

Development of Vibratory Stress Relief Actuators Based on Giant Magnetostrictive Materials

Design and Test on Moving-Magnet Linear Compressor

Design of a novel moving-magnet type of linear oscillatory motor

Design, Modeling, and Simulation of a Novel Electromagnetic Linear Actuator for Linear Motion

A Novel Halbach-Type Transverse Flux Linear Oscillatory Actuator

A Novel Transverse-Flux Moving-Magnet Linear Oscillatory Actuator

Research on a moving-magnet linear oscillatory actuator with double stators and its application

Design of linear oscillatory motor with two divided stators

Modeling, Identification, and Adaptive Robust Motion Control of Voice-Coil Motor Driven Stages

Design and Implementation of Electromagnetic Active Control Actuators

Design and Analysis of A Linear Disc-Type Electromagnetic Actuator

Design and Analysis of a Novel Composited Electromagnetic Linear Actuator

Thrust Force of Novel PM Transverse Flux Linear Oscillating Actuators with Moving Magnet

Electromagnetic Design and Analysis of a Stator–Magnet Transverse Flux Linear Oscillatory Machine with Yokeless Mover Core

Modeling and Analysis of Moving-Magnet Transverse-Flux Linear Oscillatory Motor

Design of a Normal Stress Electromagnetic Fast Linear Actuator