Abstract:To meet the application needs of rechargeable Zn–air battery and electrocatalytic overall water splitting (EOWS), developing high-efficiency, cost-effective, and durable trifunctional catalysts for the hydrogen evolution reaction (HER), oxygen evolution, and reduction reaction (OER and ORR) is extremely paramount yet challenging. Herein, the interface engineering concept and nanoscale hollowing design were proposed to fabricate N-doping carbon nanoboxes confined with Co/MoC nanoparticles. Uniform zeolitic imidazolate framework nanocube was employed as the starting material to construct the trifunctional electrocatalyst through the conformal polydopamine–Mo layer coating and the subsequent pyrolysis treatment. The / catalyst displayed superior electrochemical ORR performances with a positive half-wave potential of 0.875 V and a high limiting current density of 5.89 mA/cm2. When practically employed as an electrocatalyst in regenerative Zn–air battery, a high specific capacity of 728 mAh/g, a large peak power density of 221 mW/cm2, a high open-circuit voltage of 1.482 V, and a low charge/discharge voltage gap of 0.41 V were obtained. Moreover, its practicability was further exploited by overall water splitting, affording low overpotentials of 277 and 68 mV at 10 mA/cm2 for the OER and HER in 1 M KOH solution, respectively, and a decent operating potential of 1.57 V for EOWS. Ultraviolet photoelectron spectroscopy and density functional theory calculation revealed that the Co/MoC interface synergistically facilitated the charge-transfer, thereby contributing to the enhancements of electrocatalytic ORR/OER/HER processes. More importantly, this catalyst design concept can offer some interesting prospects for the construction of outstanding trifunctional catalysts toward various energy conversion and storage devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c03766.Experimental section; XRD patterns, photographs, EDS spectra, SEM and TEM images of different precursors; Raman and XPS spectra of various catalysts; schematic model; partial density of states and total density of states; ORR and OER polarization curves; methanol crossover tolerance for ORR; durability evaluation curves; digital image of the Zn–air button battery; reduction peaks; linear fitting; amounts of H2 and O2 experimentally measured and theoretically calculated; SEM images and HRXPS spectra after OER and HER; summaries of electrochemical performances (PDF)Movie S1 of HER performance of / product (MP4)Movie S2 of OER performance of / product (MP4)Movie S3 of EOWS performance of / product (MP4)This article has not yet been cited by other publications.

Low-loading Ir decorated cobalt encapsulated N-doped carbon nanotubes/porous carbon sheet implements efficient hydrogen/oxygen trifunctional electrocatalysis

One‐pot synthesis of multifunctional electrocatalyst for hydrogen evolution, oxygen evolution and oxygen reduction

High-Performance Trifunctional Electrocatalysts Based on FeCo/Co2P Hybrid Nanoparticles for Zinc-Air Battery and Self-Powered Overall Water Splitting

In Situ Space-Confined Growth of Co3O4 Nanoparticles Inside N-doped Hollow Porous Carbon Nanospheres As Bifunctional Oxygen Electrocatalysts for High-Performance Rechargeable Zinc-Air Batteries

Ultralong nitrogen/sulfur Co‐doped carbon nano‐hollow‐sphere chains with encapsulated cobalt nanoparticles for highly efficient oxygen electrocatalysis

Long‐Durability, Surfactant‐Free, and Bifunctional Ir‐Doped Pt3Co/MWCNTs Electrocatalysts towards ORR and OER in Acidic Media

Pd nanocluster-decorated CoFe composite supported on nitrogen carbon nanotubes as a high-performance trifunctional electrocatalyst

In Situ Formation of Cobalt Nitrides/Graphitic Carbon Composites As Efficient Bifunctional Electrocatalysts for Overall Water Splitting

Co nanoislands activated Co,N-doped porous carbon nanospheres for highly efficient and durable oxygen electrocatalyst

Achieving efficient oxygen reduction on ultra-low metal-loaded electrocatalysts by constructing well-dispersed bimetallic sites and interconnected porous channels

1D Core−Shell MOFs derived CoP Nanoparticles-Embedded N-doped porous carbon nanotubes anchored with MoS2 nanosheets as efficient bifunctional electrocatalysts

Engineering Non-precious Trifunctional Cobalt-Based Electrocatalysts for Industrial Water Splitting and Ultra-High-Temperature Flexible Zinc-Air Battery

An Advanced Nitrogen‐Doped Graphene/Cobalt‐Embedded Porous Carbon Polyhedron Hybrid for Efficient Catalysis of Oxygen Reduction and Water Splitting

Co/MoC Nanoparticles Embedded in Carbon Nanoboxes as Robust Trifunctional Electrocatalysts for a Zn–Air Battery and Water Electrocatalysis

Tetraiodo Fe/Ni phthalocyanine-based molecular catalysts for highly efficient oxygen reduction reaction and oxygen evolution reaction: Constructing a built-in electric field with iodine groups

Encapsulation of Co/Co 3 O 4 hetero-nanoparticles within the inner tips of N-doped carbon nanotubes: Engineering Mott-Schottky nanoreactors for efficient bifunctional oxygen electrocalysis toward flexible zinc-air batteries

Flexible, Porous, and Metal-Heteroatom-Doped Carbon Nanofibers as Efficient ORR Electrocatalysts for Zn-Air Battery

Designed preparation of CoS/Co/MoC nanoparticles incorporated in N and S dual-doped porous carbon nanofibers for high-performance Zn-air batteries

Formation of mesoporous Co/CoS/Metal-N-C@S, N-codoped hairy carbon polyhedrons as an efficient trifunctional electrocatalyst for Zn-air batteries and water splitting

Iridium-incorporated cobalt nanofibers as efficient and robust bifunctional catalysts for high-performance water electrolysis

Carbon nanotube-encapsulated Co/Co3Fe7 heterojunctions as a highly-efficient bifunctional electrocatalyst for rechargeable zinc-air batteries