Dynamic Simulation and Thermoeconomic Analysis of a Novel Hybrid Solar System for Biomethane Production by the Organic Fraction of Municipal Wastes
Francesco Calise,Francesco Liberato Cappiello,Luca Cimmino,Marialuisa Napolitano,Maria Vicidomini
DOI: https://doi.org/10.3390/en16062716
IF: 3.2
2023-03-14
Energies
Abstract:The anaerobic digestion of the organic fraction of municipal solid waste and the biogas production obtained from its stabilization are becoming an increasingly attractive solution, due to their beneficial effects on the environment. In this way, the waste is considered a resource allowing a reduction in the quantity of it going to landfills and the derived greenhouse gas emissions. Simultaneously, the upgrading process of biogas into biomethane can address the issues dealing with decarbonization of the transport. In this work, the production of biogas obtained from the organic fraction of municipal solid wastes in a plug flow reactor is analyzed. In order to steer the chemical reactions, the temperature of the process must be kept under control. A new simulation model, implemented in the MatLab® environment, is developed to predict the temperature field within the reactor, in order to assess how the temperature affects the growth and the decay of the main microbial species. A thermal model, based on two equilibrium equations, is implemented to describe the heat transfer between the digester and the environment and between the digester and the internal heat exchanger. A biological model, based on suitable differential equations, is also included for the calculation of the biological processes occurring in the reactor. The proposed anaerobic digestion model is derived by the combination of these two models, and it is able to simultaneously simulate both thermal and biological processes occurring within the reactor. In addition to the thermal energy demand, the plant requires huge amounts of electricity due to the presence of a biogas upgrading process, converting biogas into biomethane. Therefore, the in-house developed model is integrated into a TRNSYS environment, to perform a yearly dynamic simulation of the reactor in combination with other renewable technologies. In the developed system layout, the thermal energy required to control the temperature of the reactor is matched by a solar thermal source. The electrical demand is met by the means of a photovoltaic field. In this work, a detailed thermoeconomic analysis is also proposed to compare the environmental impact and economic feasibility of a biomethane production plant based on a plug flow reactor and fed by renewables. Several economic incentives are considered and compared to determine the optimal solution, both in terms of energy and economic savings. The plant is designed for the treatment of a waste flow rate equal to 626.4 kg/h, and the biomethane produced, approximately 850 tons/years, is injected into the national gas grid or supplied to gas stations. In the proposed plant, a solar field of an evacuated tube collector having a surface of approximately 200 m2 is able to satisfy 35% of the thermal energy demand while over 50% of the electric demand is met with a photovoltaic field of 400 m2. A promising payback time of approximately 5 years was estimated.
energy & fuels