Abstract:Wake vortex evolution of a square cylinder with a slot synthetic jet issuing from the cylinder’s rear surface has been experimentally investigated using the time-resolved particle image velocimetry technique. The Reynolds number based on the side length of the square cylinder is $Re=836$. The excitation frequency normalized by the natural shedding frequency $f_{e}/f_{0}$ varies from 0 to 6 at the dimensionless stroke length $L_{0}/w=72.6$. The distributions of the time-averaged Reynolds stresses present significant differences as the excitation frequency increases. With control, the mean streamwise velocity deficit of the wake recovers more quickly in comparison with the natural case, and the vertical velocity fluctuation intensity becomes weaker. Moreover, a drag reduction can be achieved for the control cases, especially, for $f_{e}/f_{0}=4$ and $f_{e}/f_{0}=6$, a thrust instead of drag reduction can be obtained. The profiles of the mean streamwise velocity tend to have jet-like distributions. The wake vortex dynamics and its evolution with the excitation frequency are revealed. (i) For the low excitation frequency cases ($f_{e}/f_{0}=0.5$, 1, 2), no significant changes in the dominant frequency and the spanwise vortex structures are observed in comparison with the natural case. (ii) For the moderate excitation frequency case ($f_{e}/f_{0}=3$), the wake vortex shedding frequency is locked on half of the control frequency. In this case, the shear layer is divided into two parts by the synthetic jet vortex, and the wake vortices with smaller scales still shed asymmetrically and appear closer to the square cylinder. (iii) For the high excitation frequency case ($f_{e}/f_{0}=6$), the flow is governed by the synthetic jet. As a result of strong perturbations of the synthetic jet, the wake vortex shedding becomes symmetric with the shedding frequency consistent with the control frequency. And the separation is suppressed effectively. The different control effects of the slot synthetic jet on a square cylinder and a circular cylinder are also compared in detail. Generally speaking, the circular cylinder is easier to be controlled due to its non-fixed separation points.

Parameter Influence on the Evolution of Low-Aspect-ratio Rectangular Synthetic Jets

Evolution of Low-Aspect-ratio Rectangular Synthetic Jets in a Quiescent Environment

Evolution of Elliptic Synthetic Jets at Low Reynolds Number

Experimental Investigation on the Evolution of Axi-Symmetrical Synthetic Jet

Characteristics and Mechanism of Mixing Enhancement for Noncircular Synthetic Jets at Low Reynolds Number

Experimental studies of the influence of parameters on axisymmetric synthetic jets

Wake Vortex Evolution of Square Cylinder with A Slot Synthetic Jet Positioned at the Rear Surface

Digital Particle Image Velocimetry Study on Parameter Influence on the Behavior of Impinging Synthetic Jets

On the three-dimensional flow evolution of a submerged synthetic jet with two circular orifices

Flow Structure Evolution for Laminar Vortex Rings Impinging Onto a Fixed Solid Wall

The Effect of Fractal Orifices on Synthetic Jets

Experimental Investigation of Flow Regimes of Axisymmetric and Planar Opposed Jets

Numerical Simulation Investigation on Parameters Influencing Synthetic-Jet for Active Flow Control

Particle Image Velocimetry Study of Parameter Influence for Synthetic-Jet Application

Lagrangian Analysis of Sweeping Jets Measured by Time-Resolved Particle Image Velocimetry

3-D Flow Characteristics Of Asymmetric Vortices Over An Ogive-Cylinder And Its Structural Model

Investigations of entrainment characteristics and shear-layer vortices evolution in an axisymmetric rear variable area bypass injector

The influence of nozzle aspect ratio on plane jets

Numerical Investigation of the Impact of the Rectangular Nozzle Aspect Ratio on Liquid Jet in Crossflow

Influence of Blowing Ratio on Flow Structures of an Inclined Jet in Crossflow

Experimental Investigation of a Novel Two-Dimensional Synthetic Jet