Abstract:Organic rankine cycle (ORC) has been regarded as the most promising measure for converting low-grade waste heat into electricity during the past decades. To take better advantage of ORC, the parameters of ORC and its heat integration with the background process streams should be optimized simultaneously. In this work, the decision variables of ORC not only include the operating temperature, pressure, and flowrate but also contain the type of working fluids. A set of 43 pure fluids and 36 binary mixtures are adopted from the literature as candidates for working fluids. In addition, both the supercritical and subcritical conditions of ORCs are involved. Background process streams and ORC streams with variable temperatures and flowrates are synthesized for heat integration. Such a complicated heat integration problem cannot be solved by traditional methods, where the temperature and flowrates of streams are fixed. We develop a two-level optimization strategy. The outer level identifies the promising working fluids and their compositions, temperatures, and pressures inside the ORC. The inner level deals with the heat integration problem, where the temperatures and flowrates of streams are the variables. The flowrate of ORC, the utility consumption, as well as area of heat exchangers are optimized in the inner level based on the vertical heat transfer assumption of pinch technology. The outer level is solved by a genetic algorithm, while the inner level is solved by a deterministic algorithm. Case studies show that the inner level model for heat integration is superior in both efficiency and quality of the solution. We also provide an overview of the best ORC selection for a single waste heat source between 100 and 300 degrees C and show applicability for the integration of ORC and background processes with multiple streams in case studies.

Simultaneous Optimization of Complex Distillation Systems and Heat Integration Using Pseudo-Transient Continuation Models

Dynamic optimization of operation of heat-integrated distillation column systems

Simultaneous Optimization of Complex Distillation Systems with a New Pseudo-transient Continuation Model

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

Implementation Of Advanced Control For A Heat-Integrated Distillation Column System

Estimation of Time-Dependent Parameters of a Heat-Integrated Distillation Column System

Equation-oriented Optimization of Methanol Distillation Systems Using Pseudo-Transient Models

Modeling, Control, and Optimization of Ideal Internal Thermally Coupled Distillation Columns

Simulation and Simultaneous Optimization of Distillation Systems with a New PTC Model

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Simultaneous Optimization and Heat Integration of an Aromatics Complex with a Surrogate Model

Unified approach for distillation column simulation and optimization based on equation-oriented algorithms

Simultaneous heat integration and parameter optimization for thermally coupled complex distillation flowsheet

Optimization-based Design of Structure and Operation Parameters Simultaneously for Real-World Distillation Column Based on Rate-Based Model

Towards the really optimal design of distillation systems: Simultaneous pressures optimization of distillation systems based on rigorous models

Simultaneous Optimization of Hybrid Extraction-Distillation Process Based on Rigorous Models Considering the Effect of Operating Pressure

Synthesis And Heat Integration Of Thermally Coupled Complex Distillation System

Pseudo-Transient Modeling-Assisted Rigorous Optimization of Cyclic Distillation Considering Tray Hydraulics

Synthesis of Heat Integrated Complex Distillation Systems Via Stochastic Optimization Approaches

Simultaneous optimization of heat-integrated extractive distillation with a recycle feed using pseudo-transient continuation models

Optimal Operation of Parallel Distillation Systems with Multiple Product Grades: an Industrial Case Study