Abstract:In this article, a high torque density flux modulated permanent magnet machine topology with dual permanent magnets and dual armature windings (DMDA-FMPM) is proposed. The most notable feature of DMDA-FMPM is that both stator and rotor parts consist of PMs and armature windings so that a single air gap and a simple structure are kept. Moreover, both the PMs can interact with both the windings to produce four torque components, and the output torque on the shaft is the superposition of these four torque components. Consequently, extremely high torque is expected. This paper firstly introduces the topology and main drive circuit of DMDA-FMPMs. Then the basic operation principle and slot/pole combination equation are illustrated, taking the proposed topology as an example. Afterward, the electromagnetic performance, including flux line distribution, flux density, back electromotive force (EMF), torque quality, and power factor, is analyzed by finite element analysis (FEA). Besides, the fault-tolerance of windings failure and PM demagnetization is discussed. A prototype is designed and tested to verify the proposed DMDA-FMPM. The experimental results match well with the FEA and theoretical analysis. DMDA-FMPM has excellent torque performance and fault-tolerant capability. Finally, the possible applications, operating modes, advantages, and drawbacks are discussed comprehensively.

Analysis Of The Operation Principle For Rotor-Permanent-Magnet Flux-Switching Machines

Novel Modular-Rotor Switched-Flux Permanent Magnet Machines

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Comprehensive Comparison of Rotor Permanent Magnet and Stator Permanent Magnet Flux-Switching Machines

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

A Novel Rotor-Permanent Magnet Flux-Switching Machine

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Principle Investigation and Performance Comparison of Consequent-Pole Switched Flux PM Machines

Analysis of Stator Slots and Rotor Pole Pairs Combinations of Rotor-Permanent Magnet Flux-Switching Machines

Analysis of Dual PM Vernier Machines with Different Consequent-Pole PM Topologies

Analysis and Experiment of a Dual StatorRotor PM and Winding Flux Modulated PM Machine

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

A Dual Stator/Rotor PM and Winding Flux Modulated PM Machine

Principle of Flux-Switching Permanent Magnet Machine by Magnetic Field Modulation Theory Part I: Back-Electromotive-Force Generation

Comparison of Stator- and Rotor-Surface-mounted PM Brushless Machines

Analysis of a Novel Consequent-Pole Flux Switching Permanent Magnet Machine with Flux Bridges in Stator Core

Research On The Influence Of Rotor Poles Number On Performances Of Rotor Permanent-Magnet Flux-Switching Machines

Synthesis of Flux Switching Permanent Magnet Machines

Principle of Flux-Switching PM Machine by Magnetic Field Modulation Theory Part I: Back-EMF Generation

Synthesis of Novel Flux Modulation Machine with Permanent Magnets on Both Stator and Rotor

Principle of Flux-Switching PM Machine by Magnetic Field Modulation Theory Part II: Electromagnetic Torque Generation