Abstract:This study explored the impact of microwave pretreatment on the grinding efficiency of bastnaesite ore using a stirred mill. Bastnaesite ore was prepared using a staged crushing and sieving process, followed by microwave pretreatment in a specially designed microwave furnace system. Representative samples of the crushed ore underwent stirred mill grinding, with power draw measurements recorded and adjusted to reflect only the specific energy input required for grinding. Particle size distribution was analyzed periodically using laser particle size analysis. In addition, a Box–Behnken design was used to statistically assess the effects of various parameters on the results, ensuring a robust analysis of the factors influencing energy consumption and particle size reduction. The findings reveal that microwave pretreatment significantly influenced specific energy and product P80, with SEM analyses showing increased microcracking and porosity and XRD analyses suggesting possible mineralogical alterations. This enhancement was also proved via statistical tools and analyses such as Design Expert software Ver. 13 and ANOVA. In summary, the research concludes with the following critical points: (1) Microwave pretreatment was found to reduce the energy consumption required for bastnaesite grinding by 27%. (2) Following pretreatment, bastnaesite achieved a 25% finer product size under identical grinding conditions. (3) Structural and compositional changes in bastnaesite after grinding were confirmed through scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. (4) Based on these analyses, potential mechanisms for the observed energy savings and product size reductions have been suggested. Additionally, we have enhanced the to better highlight the methods used in the study. This investigation not only advances our understanding of microwave-assisted comminution but also opens avenues for future research on optimizing and implementing this technique in large-scale mining operations.

Technological and economic considerations for the application of combined microwave assisted comminution and multi-sensor ore sorting

Microwave Treatment of Minerals and Ores: Heating Behaviors, Applications, and Future Directions

Investigating the Effect of Microwave Pretreatment on Bastnasite Grinding for Comminution Energy Reduction and Rare Earth Recovery

Optimization of Microwave Presplitting Iron Ore to Improve Mechanical Mining Efficiency

Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment

Microwave Treatment of Copper–Nickel Sulfide Ore for Promotion of Grinding and Flotation

Insights Into Ferric Leaching Of Low Grade Metal Sulfide-Containing Ores In An Unsaturated Ore Bed Using X-Ray Computed Tomography

Comparative study on grinding kinetics behavior of vanadium-titanium magnetite ore before and after microwave pretreatment

Experimental study on improving mechanical mining efficiency of deep banded iron ore by microwave presplitting

Fundamental comminution efficiency gains with the CAHM platform technology

Comminution and classification technologies of iron ore

Applications of Microwave in Metallurgical Processes

Assessing the Impact of Surface Blast Design Parameters on the Performance of a Comminution Circuit Processing a Copper-Bearing Ore

Study on the Effects of Microwave Heating Time and Power on the Mechanical Properties of Cemented Tailings Backfill

Microwave Processing Applications in Chemical Engineering: Cost Analysis

State-of-the-art in microwave processing of metals, metal powders and alloys

Effectiveness of microwave-assisted thermal treatment in the extraction of gold in cyanide tailings

Evaluation of bulk and particle sensor-based sorting systems for the New Afton block caving operation

Research Status and Progress of Microwave Associated Leaching

An applicator for high-power rock comminution using microwave technology in the megawatt range

Evaluating the performance of an industrial-scale high pressure grinding rolls (HPGR)-tower mill comminution circuit