Abstract:Membrane bioreactors (MBRs) present a means of intensively biologically treating high COD or BOD wastewaters but, like other membrane processes, are constrained by their tendency to foul. Fouling is the general term given to those phenomena responsible for increasing membrane hydraulic resistance. It can be reduced by maintaining turbulent conditions, operating at sub-critical flux and/or by the selection of a suitable fouling-resistant membrane material.The performance of various MBRs is appraised with reference to (i) fouling propensity, and (ii) removal of organics and microorganisms. Energy costs for the two process configurations for MBRs, submerged and side-stream, are reported with particular attention paid to aeration and recycle pumping costs. A number of commercial plants treating domestic wastewater are described, with further details of the most recent full-scale MBR for sewage treatment tabulated.It is shown that the side-stream configuration has a higher total energy cost, by up to two orders of magnitude, compared with the submerged system due to the recycle component. The submerged configuration operates more cost effectively than the side-stream configuration with respect to both energy consumption and cleaning requirements, with aeration providing the main operating cost component as it is required for both mixing and oxygen transfer. On the other hand, the lower flux under which the submerged system operates implies a higher membrane area and thus a higher associated capital cost. It is concluded that the MBR is a highly effective treatment process for wastewater treatment in areas requiring a high quality effluent (such as discharge to bathing waters or water reuse) or specialisation in the microbial community (e.g. high strength liquors, effective nitrification).

Analysis of the Mixing Performance of a Full-Scale Membrane Bioreactor for Municipal Wastewater Treatment

Study on Polypropylene Hollow Fiber Based Recirculated Membrane Bioreactor for Treatment of Municipal Wastewater

Analysis on technical structure and operating parameters of membrane bioreactor (MBR) in application

Physical and biological characteristics of a tangential-flow MBR for municipal wastewater treatment

Sustainability evaluation and implication of a large scale membrane bioreactor plant

Assessment of a novel overflow-type electrochemical membrane bioreactor (EMBR) for wastewater treatment, energy recovery and membrane fouling mitigation

The optimization and regulation of energy consumption for MBR process: A critical review

Integration of A Microbial Fuel Cell with Activated Sludge Process for Energy-Saving Wastewater Treatment: Taking A Sequencing Batch Reactor As an Example

Engineering Application of Membrane Bioreactor for Wastewater Treatment in China: Current State and Future Prospect

Current State and Challenges of Full-Scale Membrane Bioreactor Applications: A Critical Review

Cost-benefit analysis and technical efficiency evaluation of full-scale membrane bioreactors for wastewater treatment using economic approaches

Application and effect evaluation of membrane bioreactor technology in municipal wastewater treatment

Performance and Microbial Community of A Membrane Bioreactor System - Treating Wastewater from Ethanol Fermentation of Food Waste

Reducing aeration energy consumption in a large-scale membrane bioreactor: Process simulation and engineering application

Treatment of Municipal Wastewater by Membrane Bioreactor: A Pilot Study

A Microbial Fuel Cell–membrane Bioreactor Integrated System for Cost-Effective Wastewater Treatment

An experimental study on the use of a sequencing-batch membrane bioreactor (SBMBR) for the treatment of mixed municipal wastewater.

Aerobic MBRs for domestic wastewater treatment: a review with cost considerations

Wastewater treatment in large-scale novel corrugated-sheet MBR

Recent developments of anaerobic membrane bioreactors for municipal wastewater treatment and bioenergy recovery: Focusing on novel configurations and energy balance analysis

Superior performance of a membrane bioreactor through innovative in-situ aeration and structural optimization using computational fluid dynamics