Abstract:Five-phase permanent magnet synchronous motors offer merits of high fault tolerant capability and high torque per rms ampere and, thus, are suitable for applications, such as aerospace and electric vehicles. However, the complex machine model causes difficulties in controller design. Besides, having 32 voltage vectors with various effects on currents and torque, the selection of the optimal switching state becomes a challenge to achieve a performance tradeoff. This paper proposes an improved model predictive direct torque control (MPDTC) strategy consisting of a quadratic evaluation method (QEM) and a harmonic voltage elimination method (HVEM). In QEM, the preliminary vector is first chosen from the vectors of the outer decagon according to a cost function for torque and flux regulation. This preliminary vector, composed of three sets of different amplitudes, is further synthesized according to the error between the actual torque/flux and the references. In this way, the optimal voltage vector can be obtained without significantly increasing the computational burden. In HVEM, by subtracting the harmonics voltage component from the vector determined previously in QEM, the final voltage vector is obtained for mitigating stator harmonic currents. The proposed control strategy is compared with the conventional MPDTC approach. The results confirm the effectiveness of the proposed methods with good steady-state performance while maintaining quick dynamic responses.

Exponential Response Electrical Pole-Changing Method for a Five-Phase Induction Machine with a Current Sliding Mode Control Strategy.

Current Control Strategy of Electronic Pole-Changing for Multiphase Induction Motors

Electronic Pole-Changing Strategy with Cosine-Response for Multiphase Induction Motor Based on PR Controller

Electronic Pole-Changing Speed Adjusting Technology of Multiphase Induction Motors Based on Vector Control

Electronic pole-changing methods of multiphase induction motors based on exponent response

Electronic pole-changing methods of five-phase induction machine based on torque tracking

Electronic Pole Changing Technique of Multiphase Induction Motor Based on Vector Control

Electronic Pole Changing Technique of Multi-Phase Induction Motor

A New Reactive Power-Based Sensorless Control Strategy For Five-Phase Induction Motor With Non-Sinusoidal Power Supply

Dual Closed-Loop Control Strategy on Harmonic Plane for Multiphase Induction Motor with Harmonic Injection Based on Air-Gap Flux Orientation Control

Rotor Field Oriented Control Strategy with Harmonic Currents Closed-Loop Control for Five-Phase Induction Motor

Non-sinusoidal Supply Control Strategy Based on Rotor and Air-gap Flux Orientation for Multiphase Induction Machine

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Fault-Tolerant Control of Five-Phase Induction Motor under Single-Phase Open

Sensorless Control for Five-phase Induction Motors With Improved Third-harmonic Current Injection

An I/f Control Method With Closed-loop Regulation of Current Vector for Surface Permanent Magnet Synchronous Motor Drives

Sliding-Mode Control of Linear Induction Motor Based on Exponential Reaching Law

Improved Sliding Mode Control of Permanent Magnet Linear Synchronous Motor Speed Based on Variable Exponential Reaching Law

An Improved Model Predictive Direct Torque Control Strategy for Reducing Harmonic Currents and Torque Ripples of Five-Phase Permanent Magnet Synchronous Motors.

Dual-Plane Vector Control of a Five-Phase Induction Machine for an Improved Flux Pattern