Abstract:The structural strain plays a significant role in structural condition assessment of in-service bridges in terms of structural bearing capacity, structural reliability level and entire safety redundancy. Therefore, it has been one of the most important parameters concerned by researchers and engineers engaged in structural health monitoring (SHM) practices. In this paper, an SHM system instrumented on the Jiubao Bridge located in Hangzhou, China is firstly introduced. This system involves nine subsystems and has been continuously operated for five years since 2012. As part of the SHM system, a total of 166 fiber Bragg grating (FBG) strain sensors are installed on the bridge to measure the dynamic strain responses of key structural components. Based on the strain monitoring data acquired in recent two years, the strain-based structural condition assessment of the Jiubao Bridge is carried out. The wavelet multi-resolution algorithm is applied to separate the temperature effect from the raw strain data. The obtained strain data under the normal traffic and wind condition and under the typhoon condition are examined for structural safety evaluation. The structural condition rating of the bridge in accordance with the AASHTO specification for condition evaluation and load and resistance factor rating of highway bridges is performed by use of the processed strain data in combination with finite element analysis. The analysis framework presented in this study can be used as a reference for facilitating the assessment, inspection and maintenance activities of in-service bridges instrumented with long-term SHM system.

Reliability Assessment for PSC Box-Girder Bridges Based on SHM Strain Measurements

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Reliability assessment of cable-stayed bridges based on structural health monitoring techniques

Probabilistic Analysis of Stress Concentration Factor of an Orthotropic Steel Bridge with FBG-Based Structural Health Monitoring System *

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

Hot Spot Stress Approach For Fatigue Life Assessment In Welded Bridge Connections Using Monitoring Data And Fem Analysis

Fatigue Reliability Analysis of a Suspension Bridge Using Long-Term Monitoring Data

Vibration-Induced Probabilistic Fatigue Life Assessment of A Suspension Bridge Carrying Both Railway and Highway Traffic

Reliability-based Assessment of Steel Bridge Deck Using a Mesh-Insensitive Structural Stress Method

Continuous Box-Girder Bridge Condition Assessment Based on Structural Health Monitoring System: A Case Study

Bridge Health Monitoring Using Strain Data and High-Fidelity Finite Element Analysis

A temperature-driven approach for quantitative assessment of strengthening effect of continuous bridges using structural health monitoring data

SHM-based condition assessment of expansion Joints in suspension Bridges

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Analysis of structural responses of bridges based on long-term structural health monitoring

Dynamic reliability prediction for the steel box girder based on multivariate Bayesian dynamic Gaussian copula model and SHM extreme stress data

Structural Health Monitoring of a Long-span Cable-stayed Bridge

Investigation of temperature effects on wide steel box girder of suspension bridge based on long-term monitoring data