Abstract:For conventional interleaved two-phase forward converters with a common output inductor, the maximum duty cycle is 0.5, which limits the voltage range and increases the difficulty of the transformer's optimization. A new two-phase hybrid forward converter with series-parallel auto-regulated transformer windings is presented in this paper. With interleaved control signals for the two phases, the secondary windings of the transformers can work in series when the duty cycle is larger than 0.5, and they can work in parallel when duty cycle is lower than 0.5. Therefore, the maximum duty cycle is extended and the turns ratio of the transformer can be optimized. Duty cycle dependent auto-regulated windings result in the steady states of the converter being different in different duty cycle ranges (D>0.5 and D<0.5). Fortunately, the steady state gains of the proposed hybrid converter are identical at different duty cycle ranges, which means a stepless shift between two states. A prototype is built to verify the theoretical analysis. A conventional control loop is compatible for the whole input voltage range and load range thanks to the stepless shifting between the different duty cycle ranges.

Analysis and Design of an Input-Series Two-Transistor Forward Converter for High-Input Voltage Multiple-Output Applications.

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

Research and Application of Two-Transistor Forward Converter with Parallel and Series Combination

Research of a Combined Converter for Low-voltage and High-current Input

An Input-Series Multiple-Output Auxiliary DC/DC Converter

Investigation and Implementation of an Input-Series Auxiliary Power Supply Scheme for High-Input-Voltage Low-Power Applications

Research of an Active Clamping Current-fed Half-bridge Converter with Input Parallel and Output Series

Analysis and Suppression of the Circulating Current Influence in the Input-Series Auxiliary Power Supply for High-Input-Voltage Applications

Analysis of a Coupled Inductor Boost Three-Port Converter with High Voltage Gain for Renewable Energy Systems

Design of High-gain Converter for Low Input Voltage and High Input Current in Energy Feedback Electronic Load System

ANALYSIS OF FORWARD-FLYBACK CONVERTER EMPLOYING TWO SWITCHES AND TWO TRANSFORMERS

Design of an Accurately Regulated Multiple Output ZVS DC/DC Converter

Design and Implementation of an Accurately Regulated Multiple Output ZVS DC–DC Converter

An Input-Series Flyback Auxiliary Power Supply Scheme Based on Transformer-Integration for High-Input Voltage Applications

The Design of Auxiliary Power Supply with Wide Range and High Input Voltage

An Input-Series Flyback Converter with the Coupled-Inductor-Based Passive Snubber for High-Input Voltage Multiple-Output Applications.

A Multiwinding Coupling Model for the Forward Input-Series Transformer-Integration Converter

Two-phase hybrid forward convertor with series-parallel auto-regulated transformer windings and a common output inductor

A Hybrid Push-Pull Converter with Series-Parallel Structure in the Primary Windings

Small Signal Modeling And Analysis Of Interleaved Active-Clamp Forward Converter With Parallel Input And Series-Parallel Output

Development of A Novel Combined Converter with Low-Voltage and High-Current Input, High Power and High-Voltage Output