Abstract:A new disturbance observer based control scheme is developed for a quadrotor under the concurrent disturbances from a lightweight elastic tether cable and a lumped vertical disturbance. This elastic tether is unusual as it creates a disturbance proportional to the multicopter's translational movement. This paper takes an observer-based approach to estimate the stiffness coefficient of the cable and uses the system model to update the estimates of the external forces, which are then compensated in the control action. Given that the tethered cable force affects both horizontal channels of the quadrotor and is also coupled with the vertical channel, the proposed disturbance observer is constructed to exploit the redundant measurements across all three channels to jointly estimate the cable stiffness and the vertical disturbance. A pseudo-inverse method is used to determine the observer gain functions, such that the estimation of the two quantities is decoupled and stable. Compared to standard disturbance observers which assume nearly constant disturbances, the proposed approach can quickly adjust its total force estimate as the tethered quadrotor changes its position or tautness of the tether. This is applied to two experiments - a tracking performance test where the multicopter moves under a constant tether strain, and an object extraction test. In the second test, the multicopter manipulates a nonlinear mechanism mimicking the extraction of a wedged object. In both cases, the proposed approach shows significant improvement over standard Disturbance Observer and Extended State Observer approaches. A video summary of the experiments can be found at <a class="link-external link-https" href="https://youtu.be/9gKr13WTj-k" rel="external noopener nofollow">this https URL</a>.

Visual Servo Tracking Control Of Quadrotor With A Cable Suspended Load

ADRC Methodology for a Quadrotor UAV Transporting Hanged Payload

Robust Visual Servoing Control for Ground Target Tracking of Quadrotors

Visual Object Tracking and Servoing Control of a Nano-Scale Quadrotor: System, Algorithms, and Experiments.

Image-Based Visual Servoing of A Quadrotor Using Virtual Camera Approach

IBVS Based on Adaptive Sliding Mode Control for a Quadrotor Target Tracking under Perturbations

Image-Based Visual Servoing of Quadrotors to Arbitrary Flight Targets

Robust Observer-Based Visual Servo Control for Quadrotors Tracking Unknown Moving Targets

Nonlinear Motion Control for a Quadrotor Transporting a Cable-Suspended Payload

Robust Cooperative Transportation of a Cable-Suspended Payload by Multiple Quadrotors Featuring Cable-Reconfiguration Capabilities

Image-Based Visual Tracking of a Moving Target for a Quadrotor

Redundant Observer-Based Tracking Control for Object Extraction Using a Cable Connected UAV

Geometric Control for Load Transportation with Quadrotor UAVs by Elastic Cables

Image-based finite-time visual servoing of a quadrotor for tracking a moving target

HPA-MPC: Hybrid Perception-Aware Nonlinear Model Predictive Control for Quadrotors with Suspended Loads

A Vision-Based Ground Moving Target Tracking System for Quadrotor UAVs

Adaptive Control for a Quadrotor Transporting a Cable-Suspended Payload With Unknown Mass in the Presence of Rotor Downwash

Vision-Based Target Detection and Tracking System for a Quadcopter

Robust Homography-based Visual Servo Control for a Quadrotor UAV Tracking a Moving Target

Neuroadaptive integral robust control of visual quadrotor for tracking a moving object

RMPC-Based Visual Servoing for Trajectory Tracking of Quadrotor UAVs with Visibility Constraints