Abstract:The four main passive circuit elements include the resistor, capacitor, inductor, and transformer. Inductors and transformers have been notoriously challenging to integrate in silicon, and they occupy a significant chip area. The limited metallization and conductive substrate result in a poor quality factor $(Q)$ and limited self-resonance frequency. The tuning of inductor-based resonators is further challenged by the limited tuning range and Q of switched-capacitors/inductors. Recent LPTV N-path structures have demonstrated new functionalities that address some of these challenges, such as equivalent second-order LC bandpass filtering, lowpass filtering, notch filtering, and non-magnetic nonreciprocity [1–5]. Transformers face additional challenges of limited coupling coefficients, especially when a large turns ratio is desired [6], but they are critical to impedance transformation and matching networks. This paper describes an impedance-transforming N-path filter offering passive voltage gain, which realizes transformer-based coupled-resonator functionality that (i) features the traditional N-path benefits of high Q, high linearity, and LO-defined tuning, (ii) enables ideal coupling $(k=1)$ regardless of the step-up ratio, (iii) can be cascaded with no transfer-function non-ideality to achieve even higher step-up voltage gain with high out-of-band (OOB) rejection, (iv) emulates transformer behavior over a wide range of frequencies despite being single-ended (SE), and (v) has ultra-low clock-power consumption. The concepts are validated through two $\sim 0.1 -$to-1GHz 65nm CMOS prototypes that achieve step-up ratios $(n)$ of 4 and 8 with k of 1, voltage gains of 15dB and 17dB at 500MHz with 27dB and 33dB OOB rejection, and buffer-de-embedded NFs of 3.4dB and 4.1dB at 500MHz, respectively. OP$_{1dB}$ is 2dBm, and the power consumption is 1.7 to 3.6mW over 0.1 to 1GHz for both prototypes.

A Highly Compact Wideband Continuous-Time Transimpedance Low-Pass Filter

A 5th order 0.8/2.4 GHz programmable active band pass filter for power DAC applications

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

A New Wide Stopband Microstrip Bandpass Filter with Miniaturized Interdigital Capacitor Resonator

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

A 0.65mw 20mhz 5Th-Order Low-Pass Filter With+28.8dbm Iip3 Using Source Follower Coupling

A 5.4-Mw 50-Mhz 29.3-Dbm-iip3 Fourth-Order Low-Pass Filter

Wideband On-Chip Filter With High Selectivity and Reduced Size by Single TV Inductive Coupling

A 0.6mw 31mhz 4Th-Order Low-Pass Filter with +29dbm IIP3 Using Self-Coupled Source Follower Based Biquads in 0.18µm CMOS

A miniaturized on‐chip BPF with low insertion loss and wide stopband based on integrated passive device technology

Compact and Hybrid Dual-Band Bandpass Filter Using Folded Multimode Resonators and Second-Mode Suppression

Compact Lowpass Filter with Wide Stopband Characteristics

26.7 An Impedance-Transforming N-Path Filter Offering Passive Voltage Gain

A miniaturized low-loss absorptive bandpass filter using IPD technology

Compact Tunable Balanced Bandpass Filter with Constant Bandwidth Based on Magnetically Coupled Resonators

A 77-dB-DR 0.65-mW 20-MHz 5th-Order Coupled Source Followers Based Low-Pass Filter

A 2.2–3.6 GHz CMOS Reconfigurable Fourth-Order Bandpass Filter With Compact Size and High Selectivity Using Transformer-Type Resonators

Scalable, Low-power and High-performance Active-RC Complex Band-Pass/Low-Pass Filter with Automatic Frequency Tuning Applied to the Internet of Things

A Wide Stopband Low-Pass Filter With High Roll-Off Using Stepped Impedance Resonators

A Compact and Narrow-Band Bandpass Filter Based on Substrate Integrated Waveguide and Spoof Surface Plasmon Polaritons for Millimeter-Wave Applications