Cross-talk-free Multiplexed Immunoassay Using a Disposable Electrochemiluminescent Immunosensor Array Coupled with a Non-Array Detector.
Cuifang Li,Zhifeng Fu,Zongyun Li,Zhenxing Wang,Wei
DOI: https://doi.org/10.1016/j.bios.2011.06.031
IF: 12.545
2011-01-01
Biosensors and Bioelectronics
Abstract:A disposable electrochemiluminescent (ECL) immunosensor array was fabricated on a screen-printed carbon electrode (SPCE) substrate to perform multiplexed immunoassay (MIA) for the first time. The SPCE substrate was composed of an array of four carbon working electrodes, one common Ag/AgCl reference electrode, and one common carbon counter electrode. The immunosensor array was constructed by site-selectively immobilizing multiple antigens on different working electrodes of the SPCE substrate. With a competitive immunoassay format, the immobilized antigens competed with antigens in the sample to capture their corresponding tri(2,2'-bipyridyl)ruthenium(II)-labeled antibodies. The ECL signals from the immunosensors in this array were sequentially detected by a photomultiplier with the aid of a homemade single-pore-four-throw switch. Due to the ECL readout mechanism and the sequential detection mode, it could avoid the cross-talk between the adjacent immunosensors, which was common in other reported immunosensor array. Human, rabbit and mouse immunoglobulin Gs were near-simultaneously assayed as the model analytes. The linear ranges for them were 10-400, 20-400, and 20-400 ng/mL, with detection limits of 2.9, 6.1 and 6.5 ng/mL (S/N=3), respectively. This novel ECL strategy based on immunosensor array coupled with non-array detector provided a simple, sensitive, low-cost and time-saving approach for MIA. It showed great application potential in point-of-care test and field analysis of bio-agents, with mass production potential and high throughput.