Abstract:Acetone is a common volatile organic compound that can cause harm to human health when inhaled in small amounts. Therefore, the development of fast response and low detection limit acetone sensors becomes crucial. In this study, a core-shell spherical TiO 2 sensor with a rich pore structure was designed. This sensor exhibited excellent sensing properties, including higher responsiveness (100 ppm acetone, R a / R g = 80), lower detection limit (10 ppb) and short response time (8 s). The problem is that the sensing mechanism between TiO 2 and acetone is not thoroughly analyzed. To gain further insight, the interaction process of TiO 2 core-shell spheres and acetone under varying oxygen content environments was investigated by dynamic testing, X-ray photoelectron spectroscopy, in-situ Fourier transform infrared spectroscopy and gas chromatography-mass spectrometry. The research results show that acetone not only adsorbs on the surface of the material and reacts with adsorbed oxygen, but also undergoes catalytic oxidation reaction with TiO 2 core-shell spheres. Significantly, in high oxygen content environments, acetone undergoes oxidation to form intermediates such as acids and anhydrides that are difficult to desorpt on the surface of the material, thus prolonging the recovery time of the sensor. The discovery of this sensing process will provide some guidance for the design of acetone sensing materials in the future. Meanwhile, this also imparts valuable references and insights for the investigation of the mechanism and application of other sensitive metal oxide materials.

Ultra-high Acetone sensitivity sensor based on Pt-loaded TiO2 porous NPs synthesized via facile hydrothermal method

High-performance acetone sensor based on electrospun Tb-doped a-Fe<sub>2</sub>O<sub>3</sub> nanotubes

A Highly Sensitive and Selective ppb-Level Acetone Sensor Based on a Pt-Doped 3D Porous SnO2 Hierarchical Structure

Enhanced Acetone Gas Sensor via TiO 2 Nanofiber-NiO Nanoparticle Heterojunction

Development of a high property acetone sensor based on TiO2 core-shell spheres and their sensing mechanism analysis

Enhanced Acetone-Sensing Properties of Pt-Decorated In 2 O 3 Hollow Microspheres Derived from Pt-Embedded Template

Construction of mesoporous WO3 nanofibers functionalized with nanoscale PtO catalysts for enhanced acetone sensing properties

Nanoscale PtO2 Catalysts-Loaded SnO2 Multichannel Nanofibers toward Highly Sensitive Acetone Sensor

MOF-based nanoscale Pt catalyst decorated SnO2 porous nanofibers for acetone gas detection

Enhanced Acetone-Sensing Properties of Pt-Decorated In2O3 Hollow Microspheres Derived from Pt-Embedded Template.

1D 2D and 3D anatase TiO2 sensitized with BNQDs for sensitive acetone detection

Single Pt atom-based gas sensor: break the detection limit and selectivity of acetone

Mesoporous NiFe 2 O 4 nanorods functionalized Pt catalysts dictates highly sensing performance to acetone detection

Improved acetone sensing characteristics of TiO2 nanobelts with Ag modification

α-Fe2O3/TiO2/Ti3C2Tx Nanocomposites for Enhanced Acetone Gas Sensors

Pt nanoparticles stabilized within MOF derivative on inverse opal ZnO for acetone prediction

Large-lateral-area SnO 2 nanosheets with a loose structure for high-performance acetone sensor at the ppt level

Acetone gas sensing performance of Tio2 nanostructure synthesized by hydrothermal method

Engineering metal oxide heterostructures derived from MOFs/MXene hybrids as efficient acetone sensor

Hollow hierarchical TiO2-SnO2-TiO2 composite nanofibers with increased active-sites and charge transfer for enhanced acetone sensing performance

Highly sensitive acetone gas sensor based on gold nanoparticles modified W18O49 porous polymeric spheres