Abstract:Solid-state lithium batteries are highly promising for energy storage applications because of their high energy density and good safety. Herein, a novel solid electrolyte based on ionic-liquid-impregnated Li–Al layered double hydroxides (Li––Al LDH) is reported. Since the Li+ ions can be inserted into the vacant octahedral sites of the Li–Al LDH and the related anions intercalated into the interlayer for the charge balance, which can facilitate the transport of Li+ ions and avoid the interference of anions, the Li––Al LDH solid electrolyte with the optimized Li–IL/Li–Al LDH wight ratio of 2:1 exhibits a high ionic conductivity of 1.04 × 10–3 S·cm–1 with a Li+ transfer number of 0.35 at 40 °C. Moreover, this solid electrolyte demonstrates excellent nonflammability, good lithium stability, high electrochemical stability, and low interface resistance with electrodes. The fabricated LiFePO4/Li––Al LDH (2.0:1)/Li battery displays outstanding cyclability and rate capability at 40 °C, indicating that the Li––Al LDH SE should have great potential for applications in the solid-state lithium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c02362?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02362</a>.Li––Al LDH (2.0:1) SE exhibited its nonflammable nature and fire-resistant ability when it was in contact with flame (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02362/suppl_file/sc0c02362_si_001.mp4">MP4</a>)Photographs of the Li––Al LDH with different contents of Li–IL and Li––Al LDH (2.0:1) SE dish, EDS mappings of the Li––Al LDH (2.0:1), voltage–time profiles of Li metal plating and stripping at 0.2 mA in Li/Li––Al LDH (2.5:1)/Li batteries, CV curves of Li––Al LDH (2.5:1) based batteries under a scan rate of 0.5 mV·s–1, TGA analysis of Li––Al LDH (1.5:1) Li––Al LDH (2.0:1), and Li––Al LDH (2.5:1), cross sectional image and EDS of the LiFePO4/Li––Al LDH (2.0:1)/Li battery, cycling performances at 1 C, and EIS spectra of the LiFePO4/Li––Al LDH (2.5:1)/Li battery at 40 °C, comparison with the reported electrochemical performances of ionic liquid-based SEs (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02362/suppl_file/sc0c02362_si_002.pdf">PDF</a>)This article has not yet been cited by other publications.

In Situ Synthesis of Hierarchical Poly(ionic Liquid)-Based Solid Electrolytes for High-Safety Lithium-Ion and Sodium-Ion Batteries

Deep Eutectic Solvent‐Based Solid Polymer Electrolytes for High‐Voltage and High‐Safety Lithium Metal Batteries

Hybrid Electrolyte Based on PEO and Ionic Liquid with In Situ Produced and Dispersed Silica for Sustainable Solid-State Battery

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries

Lithium-Salt-Containing Ionic Liquid-Incorporated Li–Al-Layered Double Hydroxide-Based Solid Electrolyte with High-Performance and Safety in Solid-State Lithium Batteries

In Situ Fabrication of Solvent-Free Solid Polymer Electrolytes for Wide-Temperature All-Solid-State Lithium Metal Batteries

Flexible PVDF-HFP based hybrid composite solid electrolyte membrane co-filled with hydroxypropyl methyl cellulose and Li6.4La3Zr1.4Ta0.6O12 for high-performance solid-state lithium batteries

In situ initiator-free gelation of highly concentrated lithium bis(fluorosulfonyl)imide-1,3-dioxolane solid polymer electrolyte for high performance lithium-metal batteries

Ultrathin, flexible, solid polymer composite electrolyte enabled with aligned nanoporous host for lithium batteries

Superior Blends Solid Polymer Electrolyte with Integrated Hierarchical Architectures for All-Solid-State Lithium-Ion Batteries

Thermal stable poly-dioxolane based electrolytes via a robust crosslinked network for dendrite-free solid-state li-metal batteries

Hybrid Crosslinked Solid Polymer Electrolyte via In‐Situ Solidification Enables High‐Performance Solid‐State Lithium Metal Batteries

In Situ Network Electrolyte Based on a Functional Polymerized Ionic Liquid with High Conductivity toward Lithium Metal Batteries

Poly(ester‐alt‐acetal) Electrolyte via In Situ Copolymerization for High‐Voltage Lithium Metal Batteries: Lithium Salt Catalysts Deciding Stable Solid‐Electrolyte Interphase

Hybrid solid electrolyte with the combination of Li7La3Zr2O12 ceramic and ionic liquid for high voltage pseudo-solid-state Li-ion batteries

An in-situ generated composite solid-state electrolyte towards high-voltage lithium metal batteries

Solid Polymer Electrolyte Based on Polymerized Ionic Liquid for High Performance All-Solid-State Lithium-Ion Batteries

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane

Advanced High-Voltage Electrolyte Design Using Poly(ethylene Oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium-Metal Batteries

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

In Situ Polymerization Bi‐Functional Gel Polymer Electrolyte for High Performance Quasi‐Solid‐State Lithium−Sulfur Batteries