Abstract:Fractured crystalline rocks have been chosen or are under consideration by several countries as host rock formations for deep geological repositories for spent nuclear fuel. In such geological formations, flow and solute transport are mostly controlled by a network of connected natural fractures, each of them being characterised by internal heterogeneity, also denoted as roughness. Fractures are, in turn, subject to variable load caused by various factors, such as the presence of thick ice sheets formed during glaciation periods. Understanding how coupled hydro-mechanical (HM) processes affect flow and transport at the scale of a single natural fracture is crucial for a robust parameterisation of large-scale discrete fracture network models, which are not only used for nuclear waste disposal applications but are also of interest to problems related to geothermics, oil and gas production or groundwater remediation. In this work, we analyse and model an HM experiment carried out in a single natural fracture and use the results of both, the experimental and the modelling work, to get insights into fundamental questions such as the applicability of local cubic law or the effect of normal load on channeling. The initial fracture aperture was obtained from laser scanning of the two fracture surfaces and an equivalent initial aperture was then defined by moving the two fracture surfaces together and comparing the results obtained using a Navier–Stokes based computational fluid dynamics (CFD) model with the experimental flowrate obtained for unloaded conditions. The mechanical effect of the different loading stages was simulated using a high-resolution contact model. The different computed fracture apertures were then used to run groundwater flow simulations using a modified Reynolds equation. The results show that, without correction, local cubic law largely overestimates flowrates. Instead, we show that by explicitly acknowledging the difference between the mechanical aperture and the hydraulic aperture and setting the latter equal to 1/5 of the former, cubic law provides a very reasonable approximation of the experimental flowrates over the entire loading cycle. A positive correlation between fluid flow channeling and normal load is also found.

Experimental Investigation of Water Flow through Vesicular Fractures in Volcanic Rock

Effect of Shear-Induced Aperture Evolution on Fluid Flow in Rock Fractures

Experimental and numerical study of the geometrical and hydraulic characteristics of a single rock fracture during shear

Laboratory Simulation of Flow Through Rough-Walled Microfractures under High Hydraulic Gradient

Experimental and numerical analysis of flow through a natural rough fracture subject to normal loading

Effect of shear-induced contact area and aperture variations on nonlinear flow behaviors in fractal rock fractures

Fracture surface morphology effect on radial seepage flow in a horizontal single granite fracture

FLOW MECHANISM TEST ON SINGLE ROCK FRACTURE AND ITS THREE-DIMENSIONAL NUMERICAL SIMULATION

Channeling flow and anomalous transport due to the complex void structure of rock fractures

Shear induced fluid flow path evolution in rough-wall fractures: A particle image velocimetry examination

Simulation and Analysis of the Effect of Roughness Elements on Fluid Flow Through Single Fracture Based on Lattice Boltzmann Method

Experimental study of water flow behaviour in narrow fractures of cementitious materials

Fluid flow characteristics of cross-fractures with two branch fractures of different roughness controlled by fractal dimension: An experimental study

Pore-Scale Simulation of Gas and Water Two-Phase Flow in Rough-Walled Fractures Using the Volume of Fluid Method

Experimental investigation on macroscopic behavior and microfluidic field of nonlinear flow in rough-walled artificial fracture models

Experimental investigation on the anisotropic fractal characteristics of the rock fracture surface and its application on the fluid flow description

Investigation of Nonlinear Flow Behavior Along a Rough-Walled Limestone Fracture With Acid Dissolution

Macroscopic and Mesoscopic Characteristics of Radial Flow in Rough Rock Fractures

Modeling of Flow Characteristics in 3D Rough Rock Fracture with Geometry Changes under Confining Stresses

A New Proposed Method for Observing Fluid in Rock Fractures Using Enhanced X-Ray Images from Digital Radiography

Study on Flow and Heat Transfer in Single Rock Fractures for Geothermal Heat Extraction