Abstract:Torrefaction is a promising technology to scale up the utilization of biomass for power purposes. The ash-related issues during biomass combustion and co-combustion are essential to be addressed, however, on which the effects of torrefaction are seldom concerned and need in-depth and comprehensive investigation. To provide useful information related, the authors conducted a series of studies. In the present work, the particulate matter (PM) emission during combustion is focused on. Three biomasses were torrefied at a fixed-bed reactor, and the elemental release and transformation during torrefaction were characterized through chemical fractionation analysis. The combustion tests of the raw and torrefied biomass and their blends with two typical coals were conducted on a drop-tube furnace at 1300°C in air. The PM 10 (particulate matter with an aerodynamic particle size below 10 μm) collected by a Dekati low-pressure impactor and PM 10+ (particulate matter with an aerodynamic particle size above 10 μm) collected by a Dekati cyclone were characterized by a scanning electron microscope equipped with energy dispersive spectrometer (SEM-EDS). The results indicate that torrefaction effectively reduces S and Cl in biomass while slightly reducing the alkalis. The contents of refractory elements (Mg, Ca, and Fe) are hardly influenced. Torrefaction promotes the transformation of AAEMs (alkaline and alkaline earth metals) into less-reactive forms (HCl-soluble and insoluble). The vaporization of alkalis, S, and Cl during biomass combustion is reduced and the retention of AAEMs into aluminosilicates is promoted after torrefaction. This reduces the emission of PM 1 (particulate matter with an aerodynamic particle size below 1 μm) from biomass combustion. During co-combustion, the PM emission largely depends on the combined effects of elemental vaporization, competing reactions (alkalis against Mg, Ca, and Fe), retention of metals into aluminosilicates, and sulfation of chlorides. The inhibited effect of torrefaction on mineral vaporization reduces the formation of PM 1 by condensation. The emission of PM 1-10 (particulate matter with an aerodynamic particle size between 1 and 10 μm) either increases due to the promoted retention of the metals in coarse particles or decreases by agglomerating into PM 10+ . Torrefaction shows a preferable performance concerning its effects on PM emission during biomass combustion and co-combustion with coal.

Combustion Characteristics and Retention-Emission of Selenium During Co-Firing of Torrefied Biomass and Its Blends with High Ash Coal.

Ultrafine Particle Formation in Pulverized Coal, Biomass, and Waste Combustion: Understanding the Relationship with Flame Synthesis Process

Characteristics Experimental of Fly Ash Release in Combustion Process of Blended Coal

Combustion Characteristics and Arsenic Retention During Co-Combustion of Agricultural Biomass and Bituminous Coal.

In-situ Reaction Between Arsenic/selenium and Minerals in Fly Ash at High Temperature During Blended Coal Combustion

The Relationship Between Selenium Retention and Fine Particles Removal During Coal Combustion

Synergistic effect and volatile emission characteristics during co-combustion of biomass and low-rank coal

Co-combustion of Bituminous Coal and Biomass Fuel Blends: Thermochemical Characterization, Potential Utilization and Environmental Advantage.

Partitioning and Transformation Behavior of Selenium During Coal Combustion

Condensation and Adsorption Characteristics of Gaseous Selenium on Coal-Fired Fly Ash at Low Temperatures.

Fouling and Slagging Characteristics During Co-Combustion of Coal and Biomass

Investigation of Combustion and NO/SO2 Emission Characteristics during the Co-Combustion Process of Torrefied Biomass and Lignite

Effects of Gaseous Agents on Trace Element Emission Behavior during Co-combustion of Coal with Biomass

Optimization of the co-combustion of coal and composite biomass pellets

Influence of Coal Co-Firing on the Particulate Matter Formation During Pulverized Biomass Combustion

Fine Ash Formation and Slagging Deposition During Combustion of Silicon-Rich Biomasses and Their Blends with a Low-Rank Coal

Investigation on Combustion, Gaseous Pollutants Emission and Ash Characteristics During Co-Combustion of Semicoke and Coal Slime

Thermodynamics and synergistic effects on the co-combustion of coal and biomass blends

Investigation of the Characteristics of Catalysis Synergy During Co-Combustion for Coal Gasification Fine Slag with Bituminous Coal and Bamboo Residue

Effects of torrefaction on ash-related issues during biomass combustion and co-combustion with coal. Part 1: Elemental partitioning and particulate matter emission

Temporal Measurements and Kinetics of Selenium Release During Coal Combustion and Gasification in a Fluidized Bed.