Abstract:We demonstrate the refractive index (RI) sensing characteristics of long-period gratings (LPGs) in linearly arranged three-core fiber (TCF), which are fabricated using arc discharge technique. Due to the asymmetric index modulation during fabrication, the RI sensitivity of TCF-LPGs in the 0 degrees grating inscription direction is greater than that in the 90 degrees grating inscription direction. The spectral and RI sensing characteristics of TCF-LPGs in the 0 degrees grating inscription direction with different grating periods have been investigated experimentally. In the RI range from 1.4538 to 1.4589, the resonance at 1533.3 nm for TCF-LPGs with grating period of 465 mu m could achieve the RI sensitivity of 15943.3 nm/RIU, which could be optimized to 18160.7 nm/RIU at 1676.3 nm as the TCF-LPGs with grating period of 600 mu m. Moreover, the proposed TCF-LPGs exhibit notably greater RI sensitivity compared to arc-discharged LPGs in conventional single-mode fibre, presenting substantial advantage in RI sensing. And, changing the polarization state of the incident light enhances the RI sensitivity of TCF-LPGs. Additionally, the influence of bending or temperature interference on the RI sensitivity of TCF-LPGs is minimal, ensuring that interference with RI measurements can be neglected. The proposed sensor boasts costeffectiveness, simplicity in structure, and high sensitivity to RI, showing substantial potential for applications in chemical and biological sensing.

Mode dependence of refractive index sensitivity of long-period fiber gratings induced by periodically embedded multimode fiber

Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Simulation Method for Analyzing Mechanical Long-Period Fiber Gratings under High Birefringence

Refractive Index Sensing Characteristics of Long-Period Gratings in Linearly Arranged Three-Core Fiber

Spectral and Sensing Performance of Long-Period Fiber Gratings at 2 m Waveband

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

Refractive Index Sensing Characteristics of Long-Period Fiber Gratings Near Dispersion Turning Points at 2 Μm Waveband

A Long-Period Fiber Grating Sensor Based on a Core-Cladding Misalignment Structure

Fiber-Optic Fabry-Perot Sensor Based on Graded-Index Multimode Fiber: Numerical Simulations and Experiments

Optimization of Long-Period Grating-Based Refractive Index Sensor by Bent-Fiber Interference

Investigation on Refractive Index Sensing Characteristics of Pressure-Induced Long-Period Fiber Grating Written in a Single-Mode Fiber

Compact refractive index sensor based on offset splicing long-period fiber grating

Fabrication and Sensing Characteristics of Long-Period Fiber Grating in Capillary Fiber

Co2-Laser Induced Long-Period Fiber Gratings In Nano-Engineered Bend Insensitive Single-Mode Fiber

Compact Long-Period Fiber Gratings Based on Periodic Microchannels

Sensitivity Characterization of Cascaded Long-Period Gratings Operating near the Phase-Matching Turning Point

Fabrication and Sensing Characterization of Thermally Induced Long Period Fiber Gratings in Few Mode Fibers

Sensing characteristics of long period grating by writing directly in SMF-28 based on 800 nm femtosecond laser pulses

Quantitative analysis of optical modes in sensing a medium of the higher refractive index through long‐period fiber grating

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating