Dynamic Anti-Counterfeiting Labels with Enhanced Multi-Level Information Encryption

Hang Chen,Hailong Hu,Beichen Sun,Haobing Zhao,Yuan Qie,Zhiqi Luo,Youjiang Pan,Wei Chen,Lihua Lin,Kaiyu Yang,Tailiang Guo,Fushan Li

DOI: https://doi.org/10.1021/acsami.2c17870

2022-12-22

Abstract:ACS Appl Mater Interfaces . 2022 Dec 21. doi: 10.1021/acsami.2c17870. Online ahead of print. NO

materials science, multidisciplinary,nanoscience & nanotechnology

What problem does this paper attempt to address?

Multimodal dynamic and unclonable anti-counterfeiting using robust diamond microparticles on heterogeneous substrate

Tongtong Zhang,Lingzhi Wang,Jing Wang,Zhongqiang Wang,Madhav Gupta,Xuyun Guo,Ye Zhu,Yau Chuen Yiu,Tony K. C. Hui,Yan Zhou,Can Li,Dangyuan Lei,Kwai Hei Li,Xinqiang Wang,Qi Wang,Lei Shao,Zhiqin Chu

DOI: https://doi.org/10.1038/s41467-023-38178-1

IF: 16.6

2023-05-02

Nature Communications

Abstract:Abstract The growing prevalence of counterfeit products worldwide poses serious threats to economic security and human health. Developing advanced anti-counterfeiting materials with physical unclonable functions offers an attractive defense strategy. Here, we report multimodal, dynamic and unclonable anti-counterfeiting labels based on diamond microparticles containing silicon-vacancy centers. These chaotic microparticles are heterogeneously grown on silicon substrate by chemical vapor deposition, facilitating low-cost scalable fabrication. The intrinsically unclonable functions are introduced by the randomized features of each particle. The highly stable signals of photoluminescence from silicon-vacancy centers and light scattering from diamond microparticles can enable high-capacity optical encoding. Moreover, time-dependent encoding is achieved by modulating photoluminescence signals of silicon-vacancy centers via air oxidation. Exploiting the robustness of diamond, the developed labels exhibit ultrahigh stability in extreme application scenarios, including harsh chemical environments, high temperature, mechanical abrasion, and ultraviolet irradiation. Hence, our proposed system can be practically applied immediately as anti-counterfeiting labels in diverse fields.

multidisciplinary sciences
Inkjet-Printed Quantum Dot Fluorescent Security Labels with Triple-Level Optical Encryption

Xin Zheng,Yangbin Zhu,Yang Liu,Linpeng Zhou,Zhongwei Xu,Chen Feng,Chunbo Zheng,Yueting Zheng,Jieyu Bai,Kaiyu Yang,Dongyan Zhu,Jianmin Yao,Hailong Hu,Yuanhui Zheng,Tailiang Guo,Fushan Li

DOI: https://doi.org/10.1021/acsami.1c02390

2021-03-25

Abstract:Optical security labels play a significant role in protecting both our wealth and health. However, simultaneously meeting the requirements including low-cost fabrication, easy detection, and high-level security is still challenging for security labels. Here, we design an unclonable anti-counterfeiting system with triple-level security by using the inkjet printing technique, which can be authenticated by naked eyes, a portable microscope, and a fluorescence microscope. These labels are achieved by printing microscale quantum dot (QD) ink droplets on premodified substrates with random-distributed glass microspheres. Due to the unique capillary action induced by the glass microspheres, QDs in the ink droplets are deposited around the microspheres, forming microscale multicircular patterns. Multiple pinning of QDs at the three-phase contact lines appears during the evaporation of the droplet, resulting in the formation of a nanoscale labyrinthine pattern around the microspheres. The nanoscale labyrinth pattern and the microscale multicircular microsphere array, together with the printed macroscopic image, constitute a triple-level progressive anti-counterfeiting system. Moreover, the system is compatible with an artificial intelligence-based identification strategy that allows rapid identification and verification of the unclonable security labels.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02390?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02390</a>.QD performance, dark-field and bright-field micrographs, state of ink droplet ejection, 3D laser confocal micrographs, portable micrographs, macroscopic images taken by the camera and light transmission performance in bright fields, diagrams of AI deep learning, training and test results of AI deep learning, and representative channel diagrams of AI residual networks (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02390/suppl_file/am1c02390_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Chiroptical Nanocellulose Bio-Labels for Independent Multi-Channel Optical Encryption

Yi Zhou,Canhui Lu,Zhixing Lu,Zhen Guo,Chunhong Ye,Vladimir V Tsukruk,Rui Xiong

DOI: https://doi.org/10.1002/smll.202303064

IF: 13.3

Small

Abstract:Advanced multiplexing optical labels with multiple information channels provide a powerful strategy for large-capacity and high-security information encryption. However, current optical labels face challenges of difficulty to realize independent multi-channel encryption, cumbersome design, and environmental pollution. Herein, multiplexing chiroptical bio-labels integrating with multiple optical elements, including structural color, photoluminescence (PL), circular polarized light activity, humidity-responsible color, and micro/nano physical patterns, are constructed in complex design based on host-guest self-assembly of cellulose nanocrystals and bio-gold nanoclusters. The thin nanocellulose labels exhibit tunable circular polarized structural color crossover the entire visible wavelength and circularly polarized PL with the highest-recorded dissymmetry factor up to 1.05 due to the well-ordered chiral organization of templated gold nanoclusters. Most importantly, these elements can independently encode customized anti-counterfeiting information to achieve five independent channels of high-level anti-counterfeiting, which are rarely achieved in traditional materials and design counterparts. Considering the exceptional seamless integration of five independent encryption channels and the recyclable features of labels, the bio-labels have great potential for the next generation anti-counterfeiting materials technology.
Multilevel Stimuli–Responsive Smart "Sandwich" Label with Physical Unclonable Functions Bionic Wrinkles and Space‐Selective Fluorescence Patterns

Yan Li,Yang Li,Zejia Zhao,Yanyan Li,Feng Song,Wei Huang

DOI: https://doi.org/10.1002/smll.202405110

IF: 13.3

2024-11-02

Small

Abstract:The novel multilevel smart response anti‐counterfeiting PUF flexible composite labels that combine UV light and tensile stress stimuli–responsive anti‐counterfeiting measures, and highly random and unclonable micro‐wrinkles anti‐counterfeiting techniques. By combining three levels of anti‐counterfeiting measures into one label aimed at gradually increasing the complexity of the decryption process, thus enhancing label security. With the increasing popularity of the internet, it brings convenience to lives while also increases security risks. Physical Unclonable Functions (PUFs) can generate random, unclonable, and unique identifiers using their inherent physical characteristics, which have broad prospects in anti‐counterfeiting. Herein, inspired by the irregular tree bark fissures and random skin wrinkles found in nature, a method for creating complex micro‐wrinkles with unclonable random patterns is proposed by simply stretching hydrogels. The random texture information contained in the micro‐wrinkles is digitized into binary codes using an adaptive threshold algorithm. Additionally, a novel "sandwich" label with a multilevel intelligent anti‐counterfeiting system is proposed. The first‐level involves photoluminescence encryption with adjustable luminescence within visible light range and modulated luminescence at different excitation wavelengths; the second‐level includes strain‐related mechanical encryption, and the third‐level consists of highly random and unclonable micro‐wrinkles. The certification difficulty increases as the anti‐counterfeiting grade increases, thereby enhancing label security. Furthermore, space‐selective doping of rare earth metal–organic framework (RE‐MOF) fluorescent materials in hydrogels is achieved through the use of screen‐printing technology. The concept of novel multilevel smart anti‐counterfeiting PUF labels will further enhance current levels of counterfeiting prevention.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Multilevel Anti-counterfeiting Barcode with Enhanced Information Encryption Based on Stimulus-Responsive Digital Polymers

Xiaoman Huang,Zhishan Liang,Xiaojie Yang,Minghao Piao,Zhihao Huang,Zhengbiao Zhang

DOI: https://doi.org/10.1021/acsami.4c08408

IF: 9.5

2024-07-18

ACS Applied Materials & Interfaces

Abstract:In response to the escalating challenges of counterfeiting due to technological and socioeconomic advancements, a novel trilevel anti-counterfeiting Quick Response (QR) code system has been developed. This system integrates digital polymers with QR code and stimulus-responsive chromophores, i.e., rhodamine B (RB), rhodamine 6G (R6G), and spiropyran (SP), to provide a sophisticated security solution. This advanced barcode remains concealed until specific stimuli reveal it and can be scanned by a...

materials science, multidisciplinary,nanoscience & nanotechnology
Multi-wavelength excitation-dependent fluorescence with dynamic color gradients for information encryption and anti-counterfeiting

Youfusheng Wu,Xiao Chen,Ziyi Gong,Bin Tian,Enbo Xue,Ke Zheng,Jing Liang,Wei Wu

DOI: https://doi.org/10.1039/d4tc01916d

IF: 6.4

2024-06-21

Journal of Materials Chemistry C

Abstract:Developing optical anti-counterfeiting with dynamic color changes offers new hope for improving the replication difficulty of anti-counterfeiting labels and promoting the updating and iteration of high-level security technology and information encryption, but remains a huge challenge. Herein, we develop a ground-breaking multi-wavelength excitation-dependent anti-counterfeiting technology based on security inks containing three luminescent materials that respond to 254 nm, 365 nm, and 980 nm, respectively. Blue carbon dots/calcium carbonate (B-CDs/CaCO3) composite and green carbon dots/silicon dioxide (G-CDs/SiO2) composite are prepared via in situ loading processes. The former exhibits blue fluorescence (FL) emission light and green room-temperature phosphorescence (RTP) by turning on/off 365 nm excitation, and the latter emits green FL under the same conditions. Under 254 nm excitation, excellent red emission is realized in YVO4:Eu3+ (R-Eu) phosphor. Blue and green upconversion luminescence (UCL) are obtained in YVO4:Tm3+/Yb3+ and YVO4:Er3+/Yb3+ phosphors upon 980 nm excitation. By integrating these luminescence materials into invisible security inks, the printed security patterns exhibit triple-mode polychromatic information and spatial dynamic color-gradient characteristics by varying the excitation conditions (wavelengths, intensity, illumination angle, exposure time of excitation light). The unique optical properties enable the resulting security labels to show a high-level anti-counterfeiting strength and demonstrate application value in next-generation anti-counterfeiting.

materials science, multidisciplinary,physics, applied
Cholesteric liquid crystal doped with spiropyran and zinc ions for multi-state anti-counterfeiting

Qingxiu Wang,Xiandi Zhang,Dong Zhou,Yuzhou Chen,Chaofeng Qu,Chunlian Lu,Yongjun Liu

DOI: https://doi.org/10.1039/d4tc00979g

IF: 6.4

2024-05-03

Journal of Materials Chemistry C

Abstract:With the development of the information age, counterfeit products are rampant. Therefore, the development and application of anti-counterfeiting and information encryption still face significant challenges. Based on the selective reflection of cholesteric liquid crystals (CLC) and the photoisomerization principles of spiropyran (SP) and Zn 2+ , SP or SP/Zn 2+ mixtures are doped into CLC to form multi-mode anti-counterfeiting inks. Under different stimuli (such as UV irradiation, removal of UV, natural light exposure, heating at 55 °C, heating at 65 °C, and DC voltage), this ink exhibits various responses. Utilizing these characteristics, we first created exquisite anti-counterfeiting patterns, which obtained five different label photos through light or temperature control. Additionally, we further used the ink to create a triple "security label", which can only be recognized as the correct QR code when both conditions are met simultaneously. It is worth mentioning that by changing the ratio of chiral agent, a range of colors can be obtained to meet more complex anti-counterfeiting requirements. Liquid crystal (LC) cells with the ink were soldered onto a designed circuit board to achieve advanced information encryption. Finally, utilizing LC microspheres, a triple "security label" was created. Therefore, this multi-mode anti-counterfeiting ink can display completely independent programmed information under six different stimulus responses, all of which are reversible. Compared to simple single-state anti-counterfeiting techniques, this advanced multimodal anti-counterfeiting technology significantly improves the security level of practical applications in the field of anti-counterfeiting.

materials science, multidisciplinary,physics, applied
Multiple-state pattern encrypted superhydrophobic-icephobic colorimetric sensing film for anticounterfeiting and food freshness monitoring

Huilin Dong,Xiaoya Sun,Haichao Li,Deqiang Li,Zhe Ling,Sheng Chen,Yanglei Xu,Feng Xu

DOI: https://doi.org/10.1016/j.cej.2024.150379

IF: 15.1

2024-03-24

Chemical Engineering Journal

Abstract:Exploring high-sensitive and convenient anticounterfeiting as well as food freshness monitoring technologies to combat food safety is urgently needed but remains a great challenge. Herein, the color dynamic response and transparency encryption features of colorimetric label with heteronetwork structure can effectively cope with the above problems. The colorimetric label demonstrates excellent superhydrophobic with water contact angle of 156.2° and roll-off angle of 8.9°, and icephobic that delays the freezing time of 40 μL water droplets from 38 s to 162 s and reduces the bonding strength of ice from 249.00 kPa to 15.20 kPa. Furthermore, the colorimetric label exhibits a colorimetric shift of 126 nm and a detection limit of 0.8 ppm for NH 3 , making it successfully applicable for shrimp freshness monitoring. Notably, a locking encryption system featuring multiple logics can be achieved by combining the colorimetric properties and transparency changes of the colorimetric tags. This work proposes an ingenious, cost-effective, and convenient dual system for anticounterfeiting and food freshness monitoring, which inspired the development of an intelligent monitoring system for food quality, and has significant implications for enhancing food safety.

engineering, chemical, environmental
A Programmable 2D/3D Anti‐Counterfeiting System via Shape Memory Polymer with Surface Wrinkle and Fluorescence

Manping Ma,Shilong Dong,Wenqiang Yuan,Tianjiao Ma,Mengda Xu,Xuesong Jiang,Jin Li

DOI: https://doi.org/10.1002/adfm.202414467

IF: 19

2024-10-15

Advanced Functional Materials

Abstract:This paper reports a promising 2D/3D anti‐counterfeiting security system based on the physical unclonable self‐wrinkling patterns, fluorescence, and shape memory behavior. 3D structures constructed based on the shape memory behavior can be utilized to encrypt these 2D information, enhancing the security level and weakening the cloneable risk of surface wrinkle and fluorescence for further. The issue of counterfeiting has always been a major challenge in today's society, putting forward high requirements for anti‐counterfeiting technology. Here, a promising 2D/3D anti‐counterfeiting security system is developed based on anthracene‐functionalized poly(styrene‐butadiene‐styrene) (SBS‐CAN), which possessed the physical unclonable self‐wrinkling patterns, fluorescence, and shape memory behavior. By controlling the dimerization of anthracene groups with ultraviolet light and external pre‐stretched operation, 2D information with surface wrinkle and fluorescence is achieved, allowing for the design of security systems based on actual needs. Furthermore, 3D structures constructed based on the shape memory behavior can further be utilized to encrypt these 2D information, enhancing the security level and weakening the cloneable risk of surface wrinkle and fluorescence for further. This programmable 2D/3D anti‐counterfeiting system has multiple advantages over the commonly used fluorescent wrinkled tag or fluorescent shape memory label, providing an intelligent choice for high‐security information carriers.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Inkjet Printed Physically‐Unclonable Structural‐Color Anticounterfeiting Labels with Convenient Artificial Intelligence Authentication

Yuhuan Li,Zhiwei Liu,Kuan Zhu,Liqing Ai,Pan Jia,Na Wu,Haitao Yu,Jinqiao Wang,Xi Yao,Jinming Zhou,Yanlin Song

DOI: https://doi.org/10.1002/admi.202101281

IF: 5.4

2021-10-10

Advanced Materials Interfaces

Abstract:Inkjet printing is a deterministic process with distinguished advantages of low cost, mass production, and unlimited pattern design capability, but it usually excludes randomness and the corresponding physically unclonable functions (PUFs). Herein, inkjet printing is utilized to fabricate physically unclonable structural-color anticounterfeiting labels with reliable random photonic structure and convenient artificial intelligence (AI) authentication. The abundant microscale print-drops with random arrangements, consisting of the cross-linked short-range ordered arrays of monodisperse poly(styrene-methylmethacrylate-acrylic acid) (P(St-MMA-AA)) nanospheres, enabled full-color hues, and the reliable encoded PUFs, simultaneously. The encoded PUF information with extremely high encoding capacity can be learned and validated with AI, realizing the fast and accurate decoding of the PUFs and thus the unclonable anticounterfeiting applications. Importantly, the coupling of the structural-color anticounterfeiting labels with perfluorodecyltrimethoxysilane of low surface energy leads to high water resistance, which further improves the structural stability of the labels against water penetration. Based on the package-compatible inkjet printing approach and the reliable AI authentication, the physically unclonable structural-color anticounterfeiting labels with high structural stability and reliable AI validation bridges the gap between convenience (in both fabrication and validation) and ultimate security, opening enormous opportunities for their security applications in medicine, documents, currency, or other high-value products.

materials science, multidisciplinary,chemistry
Automated production of batched unclonable micro-patterns anti-counterfeiting labels with strong robustness and rapid recognition speed

Yuzheng He,Zunshuai Zhang,Yifei Xing,Zhiyuan Lang,Jinbo Wu,Jiong Yang

2024-07-17

Abstract:Anti-counterfeiting technologies are indeed crucial for information security and protecting product authenticity. Traditional anti-counterfeiting methods have their limitations due to their clonable nature. Exploring new technologies, particularly those based on pixel-level textures is a promising avenue to address the clonable issue due to high encoding capacity. However, research in this field is still in its infancy. This work introduces a new fluorescent anti-counterfeiting label technology with four key characteristics: efficient laser etching, high-throughput fabrication and segmentation, robustness aided by data augmentation, and an exceptionally high recognition speed. To be specific, the etching achieves a speed of 1,200 labels/3s, the high throughput yields a rate of 2,400 labels/4 min, and a total count of 51,966 labels. The number of labels is further augmented to 5,196,600 by implementing arbitrary rotation and brightness variation to enhance the robustness in the recognition procedure. We divide these labels into 44 categories based on differences in patterns. Utilizing machine learning methods, we have achieved a total recognition (including extraction and search process) time per label averaging 421.96 ms without classification, and 40.13 ms with classification. Specifically, the search process with classification is nearly fiftieth times shorter than the non-classification method, reaching 8.52 milliseconds in average. The overall recognition time is much faster than previous works, and achieve an accuracy over 98.7%. This work significantly increases the practicality of pixel-level anti-counterfeiting labels.

Materials Science
Modulation of carbon dots hybrids lasers for high security flexible multi-level anti-counterfeiting

Shaofeng Zhang,Jingjing Wang,Yiqun Ni,Yunfei Li,Hailong Zhang,Wenfei Zhang,Zheng Xie,Shuyun Zhou

DOI: https://doi.org/10.1016/j.jallcom.2023.170307

IF: 6.2

2023-05-11

Journal of Alloys and Compounds

Abstract:Anti-counterfeiting materials development has been raised for a long time to improve the level of security against counterfeiting. Increasing counterfeiting difficulties as well as reducing difficulties of materials preparation are two major concerns in the development of anti-counterfeiting materials. Herein, carbon dots (CDs) and triethyl 1,3,5-benzenetricarboxylate (Et3BTC), both of which show two random lasing peaks located around 325 nm and 450 nm at 265 nm excitation are chosen as two lasing mediums to form hybrids. Moreover, lasing intensity ratio of the two lasing bands from the hybrids can be tuned by changing the working temperature, excitation area, and even bending angle of substrate. As a result, a strategy of dual random lasing medium modulation based high security flexible multi-level anti-counterfeiting technique is developed. Thus, it is suitable for anti-counterfeiting of high-value items due to its high security and excellent waterproofness. This work will provide a perspective to boost the development of high security anti-counterfeiting techniques.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Multilayer Smart Holographic Label with Integrated RFID for Product Security and Monitoring

Cătălin Pârvulescu,Veronica Anăstăsoaie,Roxana Tomescu,Martino Aldrigo,Dana Cristea

DOI: https://doi.org/10.3390/mi14030692

2023-03-21

Abstract:Counterfeiting presents a major economic problem and an important risk for the public health and safety of individuals and countries. To make the counterfeiting process more difficult, and to ensure efficient authentication, a solution would be to attach anti-counterfeit labels that include a radio frequency identification (RFID) element to the products. This can allow real-time quality check along the entire supply chain. In this paper we present the technology optimized to obtain a multilayer holographic label with a high degree of security, patterned on a thin zinc sulfide film of a semi-transparent holographic foil rather than on the standard substrate for diffractive optical elements (metallized foil). The label is applied onto the product surface or packaging for anti-counterfeit protection. The developed multilayer structure contains various elements such as: a holographic background, nanotext-type elements, holographic elements, and an RFID antenna. The employed semi-transparent holographic foil offers the RFID antenna the possibility to transmit the electromagnetic signal through the label and thus to maximize the antenna footprint, achieving up to 10 m reading distance, with a 6 cm × 6 cm label, much smaller than the commercial standard (minimum 10 cm × 10 cm).
Flexible structural color label with tetra-mode iridescence in full three-dimensional space for sophisticated anti-counterfeiting

Tianyi Liu,Rou Meng,Jie Ren,Yaqun Han,Xingzuo Li,Shufen Zhang,Suli Wu

DOI: https://doi.org/10.1016/j.cej.2024.151277

IF: 15.1

2024-04-18

Chemical Engineering Journal

Abstract:The attractive visual appearance provided by disordered surfaces has been proven, which demonstrates great anticounterfeiting potential. However, the real application is challenging due to complex processing and Si substrates. We fabricated flexible structural color anti-counterfeiting labels by printing ZnS spheres onto aluminized flexible films to form a disordered surface, resulting in specular-diffuse dual modes appearances. Especially, based on the directionality of Mie scattering, the diffuse mode displayed three-dimensional (3D) angle-dependent structural colors under ambient light and exhibited angle-sensitive dynamic structural colors in 3D space under the light source. The angle dependence of the specular mode and the 3D iridescent of the diffuse mode form a tetra-mode iridescence, which brings sophisticated anti-counterfeiting. The comprehensive color information is directly determined by the optical properties of ZnS and Al, which pose challenges for replication using alternative methods. Further, labels with multi-color dragon patterns were fabricated using ZnS spheres with different diameters, which greatly improves information security. More importantly, based on the tetra-mode, a verification method compatible with personal terminals has been developed, which can quickly identify authenticity.

engineering, chemical, environmental
A Novel Ion Species‐ and Ion Concentration‐Dependent Anti‐Counterfeiting Based on Ratiometric Fluorescence Sensing of CDs@MOF‐Nanofibrous Films

Kaitian Zhao,Fan Liu,Hongcan Sun,Pengfei Xia,Junfeng Qu,Changgui Lu,Shenfei Zong,Rong Zhang,Shuhong Xu,Chunlei Wang

DOI: https://doi.org/10.1002/smll.202305211

IF: 13.3

2023-08-30

Small

Abstract:Abstract Traditional fluorescent anti‐counterfeiting labels based on “on‐off” fluorescence can be easily cloned. It is important to explore advanced anti‐counterfeiting fluorescent labels with high‐level security. Here, a pioneering ion species‐ and ion concentration‐dependent anti‐counterfeiting technique is developed. By successive loading Cu 2+ ‐sensitive yellow emitted carbon dots (Y‐CDs) and Cu 2+ non‐sensitive blue emitted carbon dots (B‐CDs) into metal‐organic frameworks (MOFs) and followed by electrospinning, the B&Y‐CDs@MOF‐nanofibrous films are prepared. The results show that the use of MOF not only avoids the fluorescence quenching of CDs but also improves the fluorescence stability. The fluorescence Cu 2+ ‐sensitivity of the CDs@MOF‐nanofibrous films can be regulated by polymer coating or lamination. The fluorescent label consisting of different Cu 2+ ‐sensitivity films will show Cu 2+ concentration‐dependent decryption information. Only at a specific ion species and concentration (Cu 2+ solution of 40–90 μ m ), the true information can be read out. Less or more concentration ( 90 μ m ) will lead to false information. The identification of the real information depends on both the species and the concentration. After Cu 2+ treatment, the fluorescence of the label can be recovered by ethylenediaminetetraacetic acid disodium (EDTA‐2Na) for further recycling. This work will open up a new door for designing high‐level fluorescent anti‐counterfeiting labels.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Smart Anti‐Counterfeiting Inks: Controlled Luminescence Polarization and Its Fixation by Photoisomerization and Subsequent Photopolymerization of Cyanostilbene‐Based Liquid Crystal Monomers

Jahyeon Koo,Minwook Kim,Jaeseok Hyeong,Dongmin Yu,Sanghee Kim,Junhwa Jang,Mintaek Oh,Youngjae Wi,Hyeyoon Ko,Kwang‐Un Jeong

DOI: https://doi.org/10.1002/adom.202300844

IF: 9

2023-05-30

Advanced Optical Materials

Abstract:For smart anti‐counterfeiting inks, a synthesized cyanostilbene‐based liquid crystal monomer (CSRM) is self‐assembled with conventional nematic monomers. Owing to irreversible photoisomerization of CSRM in molecular scale, the luminescence polarization of smart ink can be controlled under 365 nm UV light. Furthermore, the controlled polarization is robustly fixed by photopolymerization with blue light. Multilevel anti‐counterfeiting labels are demonstrated from the ink. To identify and protect authentics from counterfeits, anti‐counterfeiting materials are developed. In spite of many advances in luminescent anti‐counterfeiting materials, there is still a need for easily processible, multilevel anti‐counterfeiting materials. Here, the study reports a novel strategy for the production of smart anti‐counterfeiting inks and films using a cyanostilbene‐based liquid crystal (LC) monomer (CSRM). This smart ink is prepared by mixing CSRM and conventional nematic LC monomers. The optimized ink with a nematic mesophase is uniaxially oriented by simple shear coating for high transmittance and linearly polarized light emission. Upon subsequent irradiation with 365 nm UV light using a photomask, a phase transition to an isotropic state occurs by photoisomerization of CSRM in selected areas, resulting in unpolarized photoluminescence in those areas. Two optically different regions (UV treated and untreated) can be permanently fixed by photopolymerization under 460 nm blue light. Multilevel anti‐counterfeiting labels programmed by simple shear coating, molecular self‐assembly, selective photoisomerization, and photopolymerization fixation can provide a new insight in developing smart anti‐counterfeiting inks and films.

materials science, multidisciplinary,optics
Colourful 3D anti-counterfeiting label using nanoscale additive manufacturing

S. Peng,S. Sun,Y. Zhu,J. Qiu,H. Yang

DOI: https://doi.org/10.1080/17452759.2023.2179929

IF: 10.6

2023-02-28

Virtual and Physical Prototyping

Abstract:Microprinting is changing anti-counterfeit technology by producing complex micro-/nano-scale labels to increase the security level. However, the current microprinted anti-counterfeiting labels only contain 2D features, thought of as single coding (e.g. mostly in texts or graphs), unable to satisfy the high-end anti-counterfeiting demands of producing multi-coding, high-storage-density labels. Here, we introduce an approach for fluorescence printing to produce a 3D colourful, sophisticated anti-counterfeiting label. In the method, pre-synthetic QDs are printed with photoresists based on two-photon polymerisation, allowing for accurate regulation of fluorescence in both 2D and 3D. The fabricated photoresists exhibit immediate and postprocessing-free colour emissions under UV light. We demonstrated the ultra-high free design and accurate manufacturing capability of the approach by fabricating multi-colour, multi-layer patterns containing both texts and graphs on a 50μm × 50μm × 30μm portable label. The approach can also be applied to multi-dimensional optical data storage and colourful microdisplays.

engineering, manufacturing,materials science, multidisciplinary
Cholesteric Liquid Crystal Network Composite Film with Structure, Dual-Band Responsive Luminescent Color for Multiple Anti-Counterfeiting and Information Encryption

Tianxiong Wang,Xiaoshuai Li,Yunbo Zhang,Hongmei Ma,Yubao Sun

DOI: https://doi.org/10.1021/acsami.4c18278

IF: 9.5

2024-11-30

ACS Applied Materials & Interfaces

Abstract:Anti-counterfeiting technology plays an indispensable role in the high-tech field and various critical application areas. However, traditional anti-counterfeiting approaches currently in widespread use are too simplistic and easily replicated or forged, while advanced technologies with multiple anti-counterfeiting functions remain in the developmental stage. This study presents a novel multiple anti-counterfeiting technique. By employing a patterned cholesteric liquid crystal polymer network...

materials science, multidisciplinary,nanoscience & nanotechnology
Multi‐Level Anti‐Counterfeiting and Optical Information Storage Based on Luminescence of Mn‐Doped Perovskite Quantum Dots

Xuying Feng,Yuhang Sheng,Kewei Ma,Fangjian Xing,Cihui Liu,Xifeng Yang,Hongqiang Qian,Shude Zhang,Yunsong Di,Yushen Liu,Zhixing Gan

DOI: https://doi.org/10.1002/adom.202200706

IF: 9

2022-09-21

Advanced Optical Materials

Abstract:A multilevel anti‐counterfeiting label is designed based on multilayer of perovskite quantum dots. The encrypted information can be read out by adding cut‐off filter, heating and using ultrafast camera/pulsed excitation. Moreover, two bits of binary numbers can be represented by dual emissions of the Mn:CsPbCl3 perovskite quantum dots, significantly increasing the information storage capacity. Traditional fluorescent anti‐counterfeiting labels can be easily cloned due to the lack of sufficient security. Therefore, multilevel anti‐counterfeiting techniques with higher security need to be constantly explored. This study reports a multilayer composite structure containing Mn doped CsPbCl3 (Mn:CsPbCl3) perovskite quantum dots (PQDs) layer and CsPbBr3 PQDs layer. The encrypted information is patterned on the Mn:CsPbCl3 PQDs layer with weak orange fluorescence, which is concealed by the brighter green fluorescence of CsPbBr3 PQDs at the upper layer. Based on the well‐separated photoluminescence (PL) peak positions, inverse PL temperature‐dependences and distinct PL lifetimes of these two PQDs, the encrypted information can be read out by adding cut‐off filter, heating and using ultrafast camera (UCA)/pulsed excitation (PE). This multilevel anti‐counterfeiting label significantly increases the difficulties of imitation meanwhile no expensive equipment is required for the verification of authenticity. Moreover, two bits of binary numbers that can be represented by dual emissions of the Mn:CsPbCl3 PQDs by changing the doping content, which significantly increases the information storage capacity, are also demonstrated.

materials science, multidisciplinary,optics
Robust PUF Label Authentication System Synergistically Constructed by Hierarchical Pattern of Self‐assembled Phase‐Separation Encrypted Wrinkle and Deep Learning Model

Manping Ma,Zetian Jiang,Tianjiao Ma,Xiaxin Gao,Jin Li,Manhua Liu,Junchi Yan,Xuesong Jiang

DOI: https://doi.org/10.1002/adfm.202405239

IF: 19

2024-06-07

Advanced Functional Materials

Abstract:This paper reports a high‐security solution for anti‐counterfeiting using hierarchical pattern with perfect combination of micro self‐wrinkle and nano phase‐separation as physical unclonable function labels (PUFs). A high security intelligent anti‐counterfeiting authentication system is constructed by utilizing micro‐nano information database of hierarchical PUF labels, combined with the advanced artificial intelligence machine learning model LPLA. With the increasing demand for information security, current anti‐counterfeiting methods not only suffer from issues such as low information density and vulnerability to forgery, but also inherently involve a trade‐off between information capacity and readout methods. This paper reports a high‐security solution using hierarchical pattern with perfect combination of micro self‐wrinkle and nano phase‐separation as physical unclonable function (PUF) labels, which is generated through self‐organization of anthracene‐functionalized poly(styrene‐block‐butadiene‐block‐styrene) (SBS‐CAN) under UV exposure. The double‐layer morphologies formed by the wrinkle and phase separation are adjustable, independent, and stable. The obtained hierarchical PUF labels exhibit random and unique features similar to the minutiae of fingerprints at both micro and nano scales, ensuring a well‐balanced bit uniformity (>0.492), high uniqueness (>0.496), and outstanding reliability (>96%). As a consequence of the multi‐layered combination of morphologies, the designed PUF label possesses an information density about 1010 times higher than that of human fingerprints. The PUF labels can be quickly obtained through simple visual scanning and exhibit sufficient security. To cope with various application environments, the advanced authentication pipeline designed LPLA guarantees robust label recognition capability in real‐world scenarios. A practical integrated anti‐counterfeiting authentication system is developed by combining hierarchical PUF labels and authentication pipeline.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Dynamic Anti-Counterfeiting Labels with Enhanced Multi-Level Information Encryption

Multimodal dynamic and unclonable anti-counterfeiting using robust diamond microparticles on heterogeneous substrate

Inkjet-Printed Quantum Dot Fluorescent Security Labels with Triple-Level Optical Encryption

Chiroptical Nanocellulose Bio-Labels for Independent Multi-Channel Optical Encryption

Multilevel Stimuli–Responsive Smart "Sandwich" Label with Physical Unclonable Functions Bionic Wrinkles and Space‐Selective Fluorescence Patterns

Multilevel Anti-counterfeiting Barcode with Enhanced Information Encryption Based on Stimulus-Responsive Digital Polymers

Multi-wavelength excitation-dependent fluorescence with dynamic color gradients for information encryption and anti-counterfeiting

Cholesteric liquid crystal doped with spiropyran and zinc ions for multi-state anti-counterfeiting

Multiple-state pattern encrypted superhydrophobic-icephobic colorimetric sensing film for anticounterfeiting and food freshness monitoring

A Programmable 2D/3D Anti‐Counterfeiting System via Shape Memory Polymer with Surface Wrinkle and Fluorescence

Inkjet Printed Physically‐Unclonable Structural‐Color Anticounterfeiting Labels with Convenient Artificial Intelligence Authentication

Automated production of batched unclonable micro-patterns anti-counterfeiting labels with strong robustness and rapid recognition speed

Modulation of carbon dots hybrids lasers for high security flexible multi-level anti-counterfeiting

Multilayer Smart Holographic Label with Integrated RFID for Product Security and Monitoring

Flexible structural color label with tetra-mode iridescence in full three-dimensional space for sophisticated anti-counterfeiting

A Novel Ion Species‐ and Ion Concentration‐Dependent Anti‐Counterfeiting Based on Ratiometric Fluorescence Sensing of CDs@MOF‐Nanofibrous Films

Smart Anti‐Counterfeiting Inks: Controlled Luminescence Polarization and Its Fixation by Photoisomerization and Subsequent Photopolymerization of Cyanostilbene‐Based Liquid Crystal Monomers

Colourful 3D anti-counterfeiting label using nanoscale additive manufacturing

Cholesteric Liquid Crystal Network Composite Film with Structure, Dual-Band Responsive Luminescent Color for Multiple Anti-Counterfeiting and Information Encryption

Multi‐Level Anti‐Counterfeiting and Optical Information Storage Based on Luminescence of Mn‐Doped Perovskite Quantum Dots

Robust PUF Label Authentication System Synergistically Constructed by Hierarchical Pattern of Self‐assembled Phase‐Separation Encrypted Wrinkle and Deep Learning Model