Abstract:This study focuses on the development of a piezoelectric device capable of generating feedback vibrations to the user who manipulates it. The objective here is to explore the possibility of developing a haptic system that can replace physical buttons on the tactile screen of in-car systems. The interaction between the user and the developed device allows completing the feedback loop, where the user's action generates an input signal that is translated and outputted by the device, and then detected and interpreted by the user's haptic sensors and brain. An FEM (finite element model) via ANSYS multiphysics software was implemented to optimize the haptic performance of the wafer structure consisting of a BaTiO3 multilayered piezocomposite coated on a PET transparent flexible substrate. Several parameters relating to the geometric and mechanical properties of the wafer, together with those of the electrodes, are demonstrated to have significant impact on the actuation ability of the haptic device. To achieve the desired vibration effect on the human skin, the haptic system must be able to drive displacement beyond the detection threshold (~2 µm) at a frequency range of 100-700 Hz. The most optimized actuation ability is obtained when the ratio of the dimension (radius and thickness) between the piezoelectric coating and the substrate layer is equal to ~0.6. Regarding the simulation results, it is revealed that the presence of the conductive electrodes provokes a decrease in the displacement by approximately 25-30%, as the wafer structure becomes stiffer. To ensure the minimum displacement generated by the haptic device above 2 µm, the piezoelectric coating is screen-printed by two stacked layers, electrically connected in parallel. This architecture is expected to boost the displacement amplitude under the same electric field (denoted E) subjected to the single-layered coating. Accordingly, multilayered design seems to be a good alternative to enhance the haptic performance while keeping moderate values of E so as to prevent any undesired electrical breakdown of the coating. Practical characterizations confirmed that E=20 V/μm is sufficient to generate feedback vibrations (under a maximum input load of 5 N) perceived by the fingertip. This result confirms the reliability of the proposed haptic device, despite discrepancies between the predicted theory and the real measurements. Lastly, a demonstrator comprising piezoelectric buttons together with electronic command and conditioning circuits are successfully developed, offering an efficient way to create multiple sensations for the user. On the basis of empirical data acquired from several trials conducted on 20 subjects, statistical analyses together with relevant numerical indicators were implemented to better assess the performance of the developed haptic device.

Mobile Terminals Haptic Interface: A Vibro-Tactile Finger Device for 3D Shape Rendering.

A Multi-Point Cutaneous Tactile Device for Fingertip Haptics

Suspended Three-Dimensional Display Haptic Interaction Based on Leap Motion

MH-Pen: A Pen-type Multi-mode Haptic Interface for Touch Screens Interaction

Vibrotactile Representation of Three-Dimensional Shape and Implementation on A Vibrotactile Pad

Surface haptic rendering of virtual shapes through change in surface temperature

A Mechatronic Platform for Studies of Tactile Sensory System on Prosthesis Hand

Three Degree-of-Freedom Soft Continuum Kinesthetic Haptic Display for Telemanipulation Via Sensory Substitution at the Finger

Haptic Stylus and Empirical Studies on Braille, Button, and Texture Display

Effect of 2.5D haptic feedback on virtual object perception via a stylus

Haptic Feedback Device Using 3D-Printed Flexible, Multilayered Piezoelectric Coating for In-Car Touchscreen Interface

Silicone-made Tactile Actuator Integrated with Hot Thermo-fiber Finger Sleeve

Analysis and Performance Evaluation of a Modular Finger-Mounted Haptic Device for High-Density Feedback

A Skin-Integrated Multimodal Haptic Interface for Immersive Tactile Feedback

Encoding of tactile information in hand via skin-integrated wireless haptic interface

Evaluation of Pseudo-Haptic Interactions with Soft Objects in Virtual Environments

Preserving Real-World Finger Dexterity Using a Lightweight Fingertip Haptic Device for Virtual Dexterous Manipulation

3D Multimodal Sensing and Feedback Finger Case for Immersive Dual‐Way Interaction

Exploring Hand-Based Haptic Interfaces for Mobile Interaction Design

Feelit: Combining Compliant Shape Displays with Vision-Based Tactile Sensors for Real-Time Teletaction

HaptiVec - Presenting Haptic Feedback Vectors in Handheld Controllers using Embedded Tactile Pin Arrays.